General :: Looking For Tools For Static / Dynamic Code Analysis For Embedded
Sep 11, 2010
I am looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good
supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell
me briefly about their pros and cons, that will be the bet.
I am currently looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell me briefly about their pros and cons, that will be the bet.
I am looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps) with ARM-based processor. We use Eclipse IDE and C++ lanuage for development. Does anybody have recommendation for tools to analyze code complexity? The tools is better to support McCabe complexity metric, however, we may also consider others. Does anybody have recommendation for unit testing?
recommend some really good performance analysis tools? Top is not good because it has problems.I am looking for some products like collectD, collectl, or something else comparable.I need something that will look at tasks, cpu, memory, disk usage, interrupts, priorities.If I am missing a tool listed then let me know.I am looking for something that can display the results graphically.
I have an old program that kind of depends on older dynamic libraries. They tend to get upgraded easily with distro's updates. I figured that there would be a script with using ldd that would gather the libs needed and create one bigger, statically linked application that wouldn't break so easily. If I could do this, a lot of older KDE libraries could be removed from my system and easen my life.
My distribution of choice is gentoo, but I'm looking for a general solution that doesn't depend on rebuilding anything. If it runs with libs on their path, I'm sure it can be made run with libs somewhere else!
I synthesized a seismogram by using Fortran codes, I need plot the synthesized seismogram and the data together, so I can verify the accuracy of code. Now I encounter a question: how to read the SAC data by Fortran code, I have searched some codes on Internet, the details as follow:the velr12a.sac is my data file.
Code: c read sac file PROGRAM RSAC PARAMETER (MAX=1000) DIMENSION YARRAY(MAX) CHARACTER*10 KNAME
Home The Team [no-page] -X -Y -Z Projects [no-page] -Coding [no-page] --A --B --C -Desing [no-page] --E --F -Security [no-page] --G --H
Note: the Code/Design/Security projects pages (A,B,C,D...) will be at start around 35 pages, and will grow. My index.php is something like this: PHP Code: .....
What I would like to know is how to build the content (the home-main.php)? Do it dynamically based on a link something like this index.php?page=coding_b, and put in the index.php page a number of 35 if/else statements to cover all the project pages or ... static, creating every page for the projects menu when I create the menu? I check if a page 'pro-co-a.php' exists, if not I create it based on some template and do the query to get the content from db or? How to organize the pages, if using static page?
got a VPS and for testing purposes a homeserver with apache running. what two tools would i need to redirect my static ip to my dynamic one?
the traffic shall all go through the dynamic one. i've got a domain name registered with the VPS also. nameservers are configured.
is there any setup required on my local (dynamic ip) apache settings for using the name? and if i stop the service, will it still work? do i have to setup a webserver on the VPS for it? none running yet.
I remotely access to my OPENsuse 11. I am using TightVNC program. There is nothing wrong with accessing. But I have to start an analysis program, an this analysis takes about 4 to 6 hours. Therefore, I want to disconnect and let my analysis continue.But after disconnecting from suse, the program i started stops to work. Does anybody know how not to kill the program while i am not connected?
Is there any way to use a dynamic libraries as a static libraries instead when compiling, so that my resulting executable won't have them as dependencies?
I recently installed fedora 12 in my server where I had a page published in my local net by tomcat, and I was looking on the Internet how to set up an static ip address and this is what I did
then I can access via ssh by two addresses the one I got from dhcp (10.17.148.223) and the static one (10.17.148.26) I put ifconfig and and 10.17.148.223 appear on eth0 I restart my server and I just can access from 10.17.148.223 I have to put
ifdown eth0 ifup eth0
Again...to access by my static ip, y can access my page by its dns on my server, but I cant access from other computer...so, I guess when my static adress appears on ifconfig I would be able to access my page from other computer...
I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
I wanted to know how can I cross compile SMS SERVER TOOL for an embedded computer and make just one binary file for it or how can I change all of its default files places like its demon and object file and gather all of them to one directory to execute and use and run.let me explain it better for you : I have an embedded computer with Linux OS that its file system is read only and I can not add any file to /usr /lib and ..... and I can just mount a SD memory card to it and copy all of my programs to it and run them from there as you understand I have two choices to choose, first make one big binary file for each program that I am doing it now and it is not a suitable solution and the second is finding the way to change default place of shared object file of my program.now you tell me what can I do to solving this problem.
I don't use wireless tools myself currently, since I'm wired to the internet; but, I found that a package I wanted to build, required at the least, a shared version of libiw, if not both the shared AND static version. Symptoms of when you are in this boat, are error messages during compiling, similar to:
Code: /usr/lib64/libiw.a(iwlib.so): In function `iw_mwatt2dbm': iwlib.c:(.text+0x1a77): undefined reference to `log10' iwlib.c:(.text+0x1a84): undefined reference to `ceil' /usr/lib64/libiw.a(iwlib.so): In function `iw_freq2float': iwlib.c:(.text+0x1b11): undefined reference to `pow'
Whenever I had to go through the source of particular open source project, first I need to find out the actual site or the developer of the project which/who contributes to open source, then I should download the source from that site.Is there any single site where I can download the source of any open source tools or open source projects .For ex: If I need to view the source of tool netstat I should be able to download from a site(could be tgz,tar.bz2...) and understand the code.
All the packages are maintained in debian but only as binary packages. May be I should look at source packages. Is there anything else available.Plz don't say sourceforge.net and freshmeat.com - since it does not maintain all the open source tools running in linux platform.I want to view the source of netstat command but unable to get the source from anywhere.
I want to write some script to do a job which is post some data to the website every one hours .I find some information say the Perl can do this job .I know I can write by the vim.but is these any tools can help for coding .may be it will prompt the class .what tools you use ?
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File dev tun 0 ifconfig 192.168.0.1 192.168.0.2 cd /etc/openvpn secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
This is the make step error./tmp/cctiuwxL.s is the make temporary dirictory which is distroyed after the make process finises . The problem is how can I hold the /tmp/cctiuwxL.s dirictory .Then I can check it and find out the proiblem.
I have written an OpenGL based program which uses i.a. libjpeg that I want to link statically so I can send it to someone who doesn't have all the libraries needed installed to allow for a dynamically linked executable to run. As such I tried with giving the [b]-static[b] parameter to gcc.
I have seen some Linux magazines covering topics like "Static/Dynamic Lib", "Makefiles", advanced concepts of "C/C++" etc. I would like to have some subscriptions of magazines dedicated to concepts like above.
How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
I am making comparison between tora , dsr , dsdv and aodv. There is some error in tora.tcl protocol. Rest is working fine..why the tora.tcl is popping the error?
Error is given below:- Code: num_nodes is set 6 INITIALIZE THE LIST xListHead (_o22 cmd line 1) invoked from within "_o22 cmd port-dmux _o37" invoked from within "catch "$self cmd $args" ret" invoked from within "if [catch "$self cmd $args" ret] { set cls [$self info class] global errorInfo set savedInfo $errorInfo error "error when calling class $cls: $args" $..." .....
Does anyone know or have a book on the advanced uses of kickstart and its deployment methods? I have a challenge and its to: Write a report with a full and detailed analysis of the two methods,(remote installation methods of linux and windows) their differences, and a comparison of features and performance.
I am also going to have two servers (one Windows one Linux)thay deploy a virtual network of VMs with different scopes and policies. What can i really do to go beyond the scopes and policies?
This package contains tools to manage Debian based XEN virtual servers.
Using the scripts you can easily create fully configured Xen guest domains (domU) which can be listed, updated, or copied easily.
Homepage: [url] in the above output I am getting a line Conffiles and then you can see a series of /etc what are that and is it an error or some conflict?
I'm trying to install a SDK iso image onto an embedded linux platform. I was able to mount the image on the platform without problems. I also created a symbolic link called "bash" in the bin directory and had that point to busybox to satisfy the first line of code in the installer: "#!/bin/bash". However, when I run the installer, I get an error: "installer: applet not found"
I get the same error when I type "bash" on the command line. Is there a way to fix this? Here is the first few lines of code that causes the error:
