General :: Wrap App With Dynamic Libraries Into One Large Static App?
Feb 24, 2011
I have an old program that kind of depends on older dynamic libraries. They tend to get upgraded easily with distro's updates. I figured that there would be a script with using ldd that would gather the libs needed and create one bigger, statically linked application that wouldn't break so easily. If I could do this, a lot of older KDE libraries could be removed from my system and easen my life.
My distribution of choice is gentoo, but I'm looking for a general solution that doesn't depend on rebuilding anything. If it runs with libs on their path, I'm sure it can be made run with libs somewhere else!
View 1 Replies
ADVERTISEMENT
May 6, 2010
Is there any way to use a dynamic libraries as a static libraries instead when compiling, so that my resulting executable won't have them as dependencies?
View 3 Replies
View Related
Jun 18, 2011
Here's an example:
What do the numbers after so, such as in the last line, 1.1.0 mean?
My first guess was that they are version numbers, but:
So the 1.1.0 does not seem to have any connection to the version of the library, reported to be 2.4.46.
View 1 Replies
View Related
Sep 11, 2010
I am looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good
supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell
me briefly about their pros and cons, that will be the bet.
View 1 Replies
View Related
May 2, 2011
what are libraries and what is the diff between static and dynamice libraries.
View 1 Replies
View Related
Mar 16, 2010
I have a third party static library (libSTATIC.a) that I cannot recompile into a shared library. I want to create a shared library (libSHARED.so) that uses the C functions in the static library. Is it possible to do this? In other words, when linking a C program with gcc by using the -shared flag, is it necessary that all all libraries invoked in the program (even low level libraries such as libc for example) be available as shared libraries as well?
View 2 Replies
View Related
Jun 1, 2009
Any good tutorial on sharing dynamically allocated objects across shared libraries in the same process and between shared libaries and main(). In particular, I need to know what creation and destruction sequences are valid when libraries are being loaded and unloaded. For example, is it valid to allocate an object from inside a shared library procedure, and then delete that pointer from a different module, especially in the case where the allocating module has already been unloaded.
I imagine there might be all kinds of problems with this. Although my preliminary tests seem to work most of the time, I get crashes from time to time, but I'm not sure if they're caused by memory management or by threading issues. I've been restructuring my code to use a global context object to manage object creation and destruction from main(), but I'd like to find a clear exposition of the specific issues I'm dealing with before I go too much further.
View 4 Replies
View Related
Feb 11, 2010
Fedora 12 64bit What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
System -> Administration -> Network -> Edit, etc.
I made following test;
Edited ifcfg-eth0
$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 Code: # Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
[code]...
View 4 Replies
View Related
Feb 11, 2010
Fedora 12 What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
[Code]....
View 8 Replies
View Related
May 12, 2011
My project looks like this:
Home
The Team [no-page]
-X
-Y
-Z
Projects [no-page]
-Coding [no-page]
--A
--B
--C
-Desing [no-page]
--E
--F
-Security [no-page]
--G
--H
Note: the Code/Design/Security projects pages (A,B,C,D...) will be at start around 35 pages, and will grow. My index.php is something like this:
PHP Code: .....
What I would like to know is how to build the content (the home-main.php)? Do it dynamically based on a link something like this index.php?page=coding_b, and put in the index.php page a number of 35 if/else statements to cover all the project pages or ... static, creating every page for the projects menu when I create the menu? I check if a page 'pro-co-a.php' exists, if not I create it based on some template and do the query to get the content from db or? How to organize the pages, if using static page?
View 5 Replies
View Related
Mar 21, 2010
I have setup like instructed in online tutorials.
Here is a copy of my interfaces file:
Code:
Code:
View 9 Replies
View Related
Oct 16, 2010
got a VPS and for testing purposes a homeserver with apache running. what two tools would i need to redirect my static ip to my dynamic one?
the traffic shall all go through the dynamic one. i've got a domain name registered with the VPS also. nameservers are configured.
is there any setup required on my local (dynamic ip) apache settings for using the name? and if i stop the service, will it still work? do i have to setup a webserver on the VPS for it? none running yet.
View 2 Replies
View Related
Sep 11, 2010
I am currently looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell me briefly about their pros and cons, that will be the bet.
View 1 Replies
View Related
Jan 27, 2010
I recently installed fedora 12 in my server where I had a page published in my local net by tomcat, and I was looking on the Internet how to set up an static ip address and this is what I did
on /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
#
# File: ifcfg-eth0
[code]....
then I can access via ssh by two addresses the one I got from dhcp (10.17.148.223) and the static one (10.17.148.26) I put ifconfig and and 10.17.148.223 appear on eth0 I restart my server and I just can access from 10.17.148.223 I have to put
ifdown eth0
ifup eth0
Again...to access by my static ip, y can access my page by its dns on my server, but I cant access from other computer...so, I guess when my static adress appears on ifconfig I would be able to access my page from other computer...
View 11 Replies
View Related
Oct 15, 2010
I am stuck with a problem to link static libraries with gcc. There is no problem with source files since I am able to compile in a machine where the static library is installed. I am compiling with the following: Code: :~/Emotion/pjproject-1.0.3/third_party 157% gcc -Wall -I/portaudio/include -o rec patest_record.c -L./lib -lportaudio-x86_64-unknown-linux-gnu
[Code]....
View 5 Replies
View Related
Mar 16, 2010
I have a third party static library (libSTATIC.a) that I cannot recompile into a shared library. I want to create a shared library (libSHARED.so) that uses the functions in the static library libSTATIC.a. Is it possible to do this with gcc/g++?
In other words, when linking a C program with gcc/g++ by using the -shared flag, is it necessary that all libraries invoked anywhere in the program (even low level libraries such as libc for example) be available as shared libraries as well?
View 1 Replies
View Related
Dec 12, 2009
I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies
View Related
Feb 13, 2010
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
View 6 Replies
View Related
Apr 18, 2010
I have written an OpenGL based program which uses i.a. libjpeg that I want to link statically so I can send it to someone who doesn't have all the libraries needed installed to allow for a dynamically linked executable to run. As such I tried with giving the [b]-static[b] parameter to gcc.
Code:
x86_1$ make
gcc -O3 -c jpegloader.c
gcc --std=c99 -O3 -c --std=c99 -I/usr/include -L/usr/X11R6/lib main.c
[code].....
Why would gcc claim that I'm missing GLUT? This works perfectly fine when I do dynamic linking -- i.e. omitting the -static argument.
View 13 Replies
View Related
May 11, 2011
Why many Linux distros are trying to use always the latest versions of the libraries and don't save the old libraries for compatibility? I mean, I can see libtiff for example, i can found a libtiff.so.5 on my /usr/lib, but doesn't store a libtiff.so.4 or 3 just for binary applications or games. For this example, I need libtiff.so.4 for uplink.
That should happen too on the old version of sims for linux, some ID games or others.What's wrong with storing old libraries? PD: Yay, my first post on 3 years!
View 6 Replies
View Related
Aug 12, 2010
I noticed that the official Slackware packages don't contain static libraries. The SlackBuild scripts from slackbuilds.org or from Slackware DVD usually contain --disable-static option to prevent building the .a file. And if configure script doesn't allow such option, the .a file is deleted before the package is created.I am wondering what is the reason for that? Is it just the matter of conserving disk space? Are there also other reasons?
View 11 Replies
View Related
Apr 19, 2011
How can I make the less utility in Linux not wrap lines?
Long version: Often I need to view huge CSV files using less with hundreds of columns. I frequently only care about the first couple columns. However, word wrap causes one line to become several lines even on wide-screen monitors.
View 2 Replies
View Related
Jan 21, 2010
I am having a problem with long lines when displayed in less. It is difficult to describe but I will try...
I have a text file with some lines longer that 80 characters. If I use less to view this file in an Putty terminal set to an 80 character width, some of the lines wrap. So far so good. If I now use the 'j' or 'arrow down' key to scroll down one line at a time all is ok until I encounter another long line (longer than 80 characters in my example). What I see is only the wrapped portion of the line. The first 80 characters are missing. At this point I can type a ctrl-L to refresh the window and then the long line is wrapped properly. It is only when I am scrolling one line at a time that I see this behavior.
I am not certain that this is a "less problem". However, I only notice it using less. vi works properly. more works properly. I suppose it could also be a Putty, bash or environment problem but I'm not sure.
I've played around with options to less such as -X -r -R without any luck. The systems I am connecting to area all running CentOS if that makes any difference.
View 5 Replies
View Related
Oct 12, 2010
I have seen some Linux magazines covering topics like "Static/Dynamic Lib", "Makefiles", advanced concepts of "C/C++" etc. I would like to have some subscriptions of magazines dedicated to concepts like above.
View 2 Replies
View Related
Nov 13, 2010
I'm not a newbie to Linux, but I'm a newbie to LQ. I've searched the internet for an answer to an issue I'm having with JOE, to no avail.For my editing purposes, I HATE word wrap. I've read the man page extensively and nothing I try works.
To disable word wrap, it says, simply edit the joerc file and place --wordrap in the first column. Done. It works for .pl, and it works for .c (seems to be built in for C). Bottom line, I cannot disable word wrap for all text files, or at least the ones I want to edit. Has anyone solved this?
View 2 Replies
View Related
Nov 18, 2009
How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
View 4 Replies
View Related
Dec 7, 2010
I just typed several long lines into vi but I only want it to have 80 columns. How can I set this in vi?
View 1 Replies
View Related
Jan 23, 2010
Is there any equivalent for Linux to the "Edgeless" software for Windows that lets the mouse pointer wrap around from one screen edge to the opposite edge? That is, if you move the pointer off the screen to the right, it comes back in on the left side.
View 2 Replies
View Related
May 13, 2010
Abiword is splitting words at the end of sentences. If I go to the end of the line and nudge the word, it will wrap but I get an extra space. I can usually delete the space. Sometime, the word will wrap correctly if I continue typing but this is not the typical case.
I know this is not a problem with OpenOffice but I don't want to install 70MB of program just to get a simple word processor.
View 1 Replies
View Related
Nov 13, 2010
I have no need for word wrap for most of what I use JOE for. The man page and the HOWTO don't answer this question, so I'm wondering if it might be a bug. I'm running Joe 3.7.in the joerc file does not work correctly. It works (built-in?) for .c files, and I can make it work for .pl files. But files with no extension? Forget it.Without having to resort to the menu each time to turn it off, is there another way to disable word wrap?
View 3 Replies
View Related
