I want to separate the Apache2 Error log to log certain events in a specified file.
For example:
client denied by server configuration > denied.log
Directory index forbidden by Options directive > forbidden.log
I would like it add it to the logs as the events happen, and like the other logging systems, create new files when the current is full. i.e. denied.log.0
I have suse10 64bit and I was setting up SVN server on it. After all required setup while reloading apache2,its giving the error:
Code:
httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
I have suse10 64 bit installed. I am setting up a svn server on it. After installation and adding the modules ,while reloading the apache2 it's throwing the error as: HTML Code: httpd2-prefork: Syntax error on line 113 of /etc/apache2/httpd.conf: Syntax error on line 31 of /etc/apache2/sysconfig.d/loadmodule.conf: Cannot load /usr/lib64/apache2/mod_dav_svn.so into server: /usr/lib64/libsvn_subr-1.so.0: undefined symbol: apr_memcache_add_server
View 9 Replies View RelatedI am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
Installation of SUSE 11 server now when I try to configure apache2 (opening port 80) I get a "cannot adjust apache2 service" error??? Can anyone shed some light on this.
View 1 Replies View RelatedI am trying a release of Ubuntu has have run into a problem that does not make much sense. I am receiving the following error: Syntax error on line 20 of /etc/apache2/sites-enabled/portal: Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration
fail! I believe the modules required for this is apt-get install libapache2-mod-proxy-html and it shows under the available modules and it was enabled with a2enmod proxy-html.
The line from the config is ProxyHTMLEnable On. The release is the latest download with updates from, 32bit.
I have the following network setup:
The idea is to separate the download and the upload, namely to send the upload on Net1 and the download on Net2, completely transparent to the client. My first ideas were using simple routing rules....having the default gateway for Gateway A over Net1 and having the route to the client in Gateway B over Net2. However, if I do that, the packets arriving in Gateway B from the client, aren't forwarded anymore. The same thing happens if I don't have any route to the client in Gateway B. In order to forward the packets, does it really matter if the router knows how to route to the source and does it really mater if the packet arrives on the same interface as the routing rules point to?
I notice that when I create a launcher in Gnome it then appears later on my desktop when logged into xfce. I dislike the way DE's are 'bleeding' into one another this way. Does anybody have a way to separate the lists of launchers each environment possesses so I can have different icons in each? The only way I can think of off the top of my head is commenting-out icons in my xfce config file - if that is possible.
I'm after fewer icons under xfce and am happy to have the Gnome desktop fully populated with more - hope that makes sense. I'd rather not have to go through installing and setting up idesk with xfce to achieve the same result if I can avoid it. Ditto on menues. I have my Gnome menus properly tidied up, but under xfce I still have several multiple instances of, for instance, the menu-editor app. Can you 'quarantine' these from one another as well?
Here is my scenario, I want to create about 3 groups of users:
--Admins-create and manage users
--Support1-Restart basic stack apps(httpd, mysql etc)
--Support2 Backups
So in my sudoers file i have managed to set them all up to perform the tasks above. However, I want to limit the users in the specific groups from running commands from other groups. eg a user in admins shouldnt be able to restart the stack applications etc. I have tried using the ! to create an exception eg !/etc/init.d/httpd start for the users but its not working.
We Are Using Centos 5 64Bit with Kernel 2.6.18.92 with Amd Athlon ProcessorThe problem when calling setsockopt it return error errno:22 InvalidargumentThis code run on Macos ,Sunsolaris ,But fail to execute on Centos 5 64bit & The SCTP mailing group told me that this problem belongs to centosexample form ibm webside
/*
server
*/
[code]....
My apache2 logs aren't being rotated, I have 1 log nearing 100MB in size.
Error shown below when a logrotate happens on apache2 logs:
Code:
error: other_vhosts_access.log:5381 unknown option 'jack' -- ignoring line
error: other_vhosts_access.log:5381 unexpected text
"jack" is a sub-domain.
I have just booted up to do some local work on my website and apache 2 has start throwing 403 error's at me? phpmyadmin and other alias's I have setup work but the main root just 403's on me?? It has been working away flawlessly for months now. No system upgrade has recently updated Apache and I can see no errors in my set up files!
My default setup file:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/gavin/wwwsite
<Directory "/home/gavin/wwwsite">
Options +Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory> .....
I have the following message with apache:
Quote:
Forbidden
You don't have permission to access /site/home.html on this server.Apache/2.2.12 (Ubuntu) Server at localhost Port 80
home.html isn't in /var/www but in my /home/myname/site/ How can visualize my site in my local directory?
On my Debian Etch server, I'm finding a lot of the following in my /var/log/apache2/error.log file:
Code:
[Mon Jan 12 09:34:17 2009] [notice] child pid 17217 exit signal Segmentation fault (11)
[Mon Jan 12 09:34:18 2009] [notice] child pid 17206 exit signal Segmentation fault (11)
[Mon Jan 12 09:34:18 2009] [notice] child pid 17216 exit signal Segmentation fault (11)
What is a good way to trouble shoot and remedy this problem? We can't have processes dying all over the place, now can we.
I wanted to setup a local Apache2 server for some programming and testing. I installed and got Apache2 working with PHP, MySQL and all works fine. Now I wanted to add an additional directory to somewhere in my /home. And that's where things went wrong. I went to edit /etc/apache2/sites-available/default. This is it:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /var/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /var/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
Code:
You don't have permission to access /po/ on this server.
So I go to the logfile; which says this:
Code:
[Sat May 08 16:43:51 2010] [error] [client 127.0.0.1] (13)Permission denied: access to /po/ denied
I tried a lot of stuff using chmod and chown, but all to no avail. I tried to change the ownership of the /home/name/web to root, and to www-data, I changed file permissions to allow executing the files.
I have just installed Apache2 v. 2.2.17 on Ubuntu,and I am trying to get it to work with Ruby (v 1.8.7). I have followed the instructions on the Ubuntu site and ended up installing Phusion Passenger v 3.0.7, making the suggested changes to the httpd.conf file.
When I launch Apache2 I now get the message:
Cannot load /usr/lib/ruby/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so into server: /usr/lib/ruby/gems/1.8/gems/passenger-3.0.7/ext/apache2/mod_passenger.so: undefined symbol: ap_get_server_banner
I have found a bug report (url) that suggests "adding a dependency" but am not sure how to do that. Any kind soul out there can take pity of this eager Linux neophyte?
Basically when I try execute a PHP script with SuexecUserGroup set, I get the following error:
uid: (501/uname) gid: (501/501) cmd: php-cgi
command not in docroot (/usr/bin/php-cgi)
Without SuexecUserGroup set, they work fine, but obviously aren't executed as the script's owner.
Here's one of the domain's configs:
Code:
<VirtualHost *:80>
ServerName www.domain
ServerAlias domain
[code]...
For a bit of background info, the end result i'm trying to achieve is for files that get uploaded via a php script to be owned by the user account that owns the script rather than by the apache user.
I currently have a massive problem with my main webserver: one of the SCSI drives where I keep my htdocs seems to have failed (sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK end_request: I/O error, dev sda, sector 7797601).
Since I have no backup (dumb!dumb!dumb!) of it, I tried to copy what I could on the fly, but that failed miserably. The next idea was to umount the volume and try remounting it R-O, but I have a bunch of apache2 processes that are apparently reading/writing on it and I can't seem to find any way of terminating them. I tried via init script, killall and kill -9 but they just don't respond. Until I can terminate those processes, I won't be able to unmount the drive and try saving what's left of the data.Oh and the cherry on top of the cake: the server is 1100 miles away so I can't even access it physically..Is there any way I didn't think of to get rid of those apache processes?
I've setuped apache2 with SSL on Debian Etch, but I'm getting this Error message in the browser:
Code:
This site does not exist!
I have installed a LAMP server (Debian Lenny + Apache2 + PHP Version 5.3.1-0.dotdeb.1). On this machine, my web application (PHP + MySQL) exists in 2 flavours:
- Dev
- Prod
In /etc/apache2/sites-available, I have ims & ims-dev, one for each instance. Their contents are identical in terms of settings, except for the paths (dev/prod):
Code:
<VirtualHost *:80>
ServerAdmin admin@domain.com
ServerName ims.domain.com
ServerAlias ims.domain.com
[code]....
why this difference when the settings are strictly identical? Do I need to add EnableSendfile off in my conf files to stop that?
I am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.
The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.
But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.
I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.
These are the lines I have added to the /etc/apache2/sites-available/default file
Code:
<Directory "/home/myusername/public_html/site/">
SetHandler mod_python
PythonHandler mod_python.publisher
PythonDebug On
PythonAutoReload On
I am having problems accessing my website. I have port forwarding enabled on my router and below are the errors I am getting plus my firewall setup.
Code:
thomas@tdtconsulting:/etc/apache2/sites-available$ sudo a2ensite tdtconsulting
[sudo] password for thomas:
Enabling site tdtconsulting.
Run '/etc/init.d/apache2 reload' to activate new configuration!
thomas@tdtconsulting:/etc/apache2/sites-available$ sudo /etc/init.d/apache2 reload
* Reloading web server config apache2 [Tue Oct 12 18:21:04 2010] [warn] NameVirtualHost 192.168.1.3:80 has no VirtualHosts
[Code]...
I was looking at my logs and was wondering what the easiest way to go about removing certain things from being logged.
For instance I noticed by default Ubuntu seems to log all network traffic and handshakes with wifi etc and I would like to keep such out of my logs.
I am using python as a cgi for a simple game that i'm planning to run on a website. It requires the user to enter his name and age. This is saved in a file newly created in his/her name. However, I'm getting this error The above is a description of an error in a Python program, formatted
63 for a Web browser because the 'cgitb' module was enabled. In case you
64 are not reading this in a Web browser, here is the original traceback:
65
66 Traceback (most recent call last):
67 File "/var/www/webprog.cgi", line 51, in <module>
68 main()
69 File "/var/www/webprog.cgi", line 44, in main
[Code]...
I recently installed Apache on Lucid Lynx (Macbook 1.1) using the following tutorial: [URL] Everything appears to work correct except that when I browse http://localhost/ in Firefox, I cannot see any of the directories. Although, files such as html documents are visible. When I view the /var/www directory using the default graphical file browser, all of its child directories have Xs over their icons. When I attempt to open the directory "js", the following error message displays:The folder contents could not be displayed.
You do not have the permissions necessary to view the contents of "js".
I figured this was preventing Firefox from viewing the directories. So I launched it with the "gksu" command to see if it would help. I still couldn't see directories when browsing http://localhost/ I'm basically trying to achieve functionality identical to the MAMP local server for Mac OS X. I'm about to start a LAMP project for a new client so having this up and running is important!
I just finished upgrading from 10.04 to 10.10 and converting from F-spot to Shotwell, including adding a large number of new photographs (>15 k).
On opening Shotwell today I found that all "tags" and "events", including those from the F-stop imported photos, have disappeared!! (strangely the photo ratings are maintained)
No amount of searching was able to relocate them. The modification date on the photo.db in the .shotwell folder is pre-problem, so I am holding out some hope that the relevant data have not been over-written.
I am not familiar with sql so do not know how to check the db (or restore the correct headers or whatever else is needed).
I use Mythbuntu 9.10 with an IMON PAD IR/VFD. Everything is fine except that two buttons (MyDVD and menu) fire their event twice. In that case, I'm not talking about a normal repetition in case of a long button press but they fire their initial events twice.
Here is what irw shows:
0000000029a3d5b7 00 MyDVD iMON-PAD
0000000029a3d5b7 00 MyDVD iMON-PAD
000000002ba385b7 00 Menu iMON-PAD
000000002ba385b7 00 Menu iMON-PAD
I pressed the buttons only once each - and not long enough for a repetition. For all other buttons it's fine. As far as I understand, using the .lirrc file to cope with repetitions is no valid approach (at least it didn't work for me) because the events are all numbered with "00", and not with "00", "01",... - so .lircrc is out of this, right?
What I need is a database that can show a Timeline and have the basic functions for searching by date and other criteria. Not in a hurry is for a future project. Any clues?
View 6 Replies View RelatedI'm trying to install Apache2::Request module (from CPAN.org) and in shell there is such messages: I'm using openSUSE 11.1, Perl 5.8
[Code]...
Running Fedora 10 and 11. Using Firestarter firewall.Does anyone know where Firestarter gets the Events which it displays?I do not find anything in /etc/firestarter/.I suspect Firestarter looks in a log file which Fedora keeps somewhere.
View 2 Replies View Related