Slackware :: Separating Gnome And XFCE DEs
Sep 24, 2010
I notice that when I create a launcher in Gnome it then appears later on my desktop when logged into xfce. I dislike the way DE's are 'bleeding' into one another this way. Does anybody have a way to separate the lists of launchers each environment possesses so I can have different icons in each? The only way I can think of off the top of my head is commenting-out icons in my xfce config file - if that is possible.
I'm after fewer icons under xfce and am happy to have the Gnome desktop fully populated with more - hope that makes sense. I'd rather not have to go through installing and setting up idesk with xfce to achieve the same result if I can avoid it. Ditto on menues. I have my Gnome menus properly tidied up, but under xfce I still have several multiple instances of, for instance, the menu-editor app. Can you 'quarantine' these from one another as well?
View 1 Replies
ADVERTISEMENT
Feb 1, 2010
the above event usually happens to me when im logged in to xfce my screen suddenly goes black for like 1 sec then my background becomes my background in gnome.. what does this mean? should i remove the gnome or there's some other options i can do to prevent this?
View 14 Replies
View Related
Jul 29, 2010
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
View 4 Replies
View Related
Aug 22, 2010
I recently installed Slackware Linux 13.1 , and my Wireless is down. I've only installed 3 Linux disto's on my main laptop (Ubuntu 9.10 , 10.04 , and Crunchbang Linux 9.04 , just had Crunchbang), and they all had the same problem. In all three , I was able to enable Windows Wireless drivers and every thing worked. Now , I'm assuming I have to the same ting in Slackware? Sorry , but I have no idea what my wireless card is. But I know that my laptop is a Dell Insprion E1705. One last thing , I did ifconfig and that wlan0 is my Wi-Fi interface. I typed ifconfig wlan0 up to see if that was the problem. After I did that , I got and error message. Then I typed ifconfig wlan0 down to see if it was down and it made wlan0 down. I tried bringing it up again , but I got an error saying it couldn't find the device specified. Also , how do I install XFCE? I really don't like KDE for some reason and would like to install XFCE. I chose XFCE over GNOME (my favorite) because I want to try something new.
View 4 Replies
View Related
Jan 25, 2011
I was over in the Desktop forum yesterday and apparently 'event sounds' are available for Xfce and are part of the original package, but I've never seen them made available, that is, the switch to turn them on isn't where it is suppose to be, in any Slackware specific package of Xfce.I've used 4.61 that came with Slackware64 13.1, 4.61 from the Salix depository, 4.62 from Mr. Workman, 4.62 from 'current' and recently 4.8 from Mr. Workman. None of these make the 'event sounds' available.
View 3 Replies
View Related
Aug 26, 2010
I recently logged into my Slackware 13.1 account and when I issued the "startx" command , there was no toolbar at the bottom and I couldn't see my mouse. I was able to click on a short-cut on my desktop , and my mouse came back. I can't open any thing except VirtualBox. When I open it , the top is cut off , so the minimize , maximize and close buttons are cut-off . I really have no idea what to do.P.S. I have XFCE instead of KDE
View 5 Replies
View Related
Feb 6, 2011
i encounter a problem after following last -current updates.I cannot add and move items in XFCE Panels.why this happens?and what the solution?
View 1 Replies
View Related
Mar 21, 2011
Slackware 13.1 XFCE. I've come across a strange problem which i've never had before on Slackware. I decided to set a desktop up for my sister. Being girls as they are she wanted to change the wallpaper. I showed her how, however when the machine is restarted the wallpaper turns back to default. In all my slack machines around here, i just simply right click on the desktop and change it. That makes it persistent throughout boots. I'm obviously missing something.
View 1 Replies
View Related
Jul 8, 2010
I have the following network setup:
The idea is to separate the download and the upload, namely to send the upload on Net1 and the download on Net2, completely transparent to the client. My first ideas were using simple routing rules....having the default gateway for Gateway A over Net1 and having the route to the client in Gateway B over Net2. However, if I do that, the packets arriving in Gateway B from the client, aren't forwarded anymore. The same thing happens if I don't have any route to the client in Gateway B. In order to forward the packets, does it really matter if the router knows how to route to the source and does it really mater if the packet arrives on the same interface as the routing rules point to?
View 1 Replies
View Related
May 16, 2011
I want to separate the Apache2 Error log to log certain events in a specified file.
For example:
client denied by server configuration > denied.log
Directory index forbidden by Options directive > forbidden.log
I would like it add it to the logs as the events happen, and like the other logging systems, create new files when the current is full. i.e. denied.log.0
View 1 Replies
View Related
Jul 20, 2011
Here is my scenario, I want to create about 3 groups of users:
--Admins-create and manage users
--Support1-Restart basic stack apps(httpd, mysql etc)
--Support2 Backups
So in my sudoers file i have managed to set them all up to perform the tasks above. However, I want to limit the users in the specific groups from running commands from other groups. eg a user in admins shouldnt be able to restart the stack applications etc. I have tried using the ! to create an exception eg !/etc/init.d/httpd start for the users but its not working.
View 6 Replies
View Related
Aug 14, 2010
Is there a way to install just XFCE? and not Gnome or KDE? I don't mind Gnome, but I definitely don't like KDE. I have tried installing the XFCE spin to my hard drive, but when I use yum to update packages later, using the default repository, yum wants to install Gnome for some strange reason, and a bunch of other stuff I don't need. Is there a way to prevent this? because really you'd think the XFCE spin would setup yum so Gnome wouldn't be installed, wouldn't you think? I don't really mind Gnome being installed, its just that I never use it, I always use XFCE, so it seems like a waste of disk space to even install it.
well I guess the graphical boot loader uses Gnome, I don't know, but I do know yum installs a bunch of other stuff I don't use after the XFCE spin is installed to the hard drive. How do I prevent that from happening is what I'm asking?
My machine is an HP Pavilion DV6-1350US Notebook Entrainment PC
View 1 Replies
View Related
May 22, 2011
I'm asking if it would be possible to run XFCE and Gnome 3 on the same system and if so how can I go about this in the correct manner?
My GNOME 3 repo is set to 98.
View 4 Replies
View Related
Jan 7, 2010
i am using for few years ubuntu gnome distributions. I am having lot of problems with my Dell Mini 9 and external display, ([URL] and i have lot of pdf books. I tried few readers but adobe was the best one (especially for scans of old books), but still, it can be very slow. Does anyone knows if it make any difference in performance if i switch to KDE or XFCE version? And maybe as subquestion-can i avoid my problems with external display freezing if i switch from gnome to some other desktop version?
View 4 Replies
View Related
Dec 21, 2010
I have been running ubuntu 10.10 on a old laptop for a while but have started to get tired of the high resource usage. I installed xfce via xubuntu-desktop package and all worked well but the menu. It is the Xfce menu not the customized xubuntu panel and i really dont much like it.
View 4 Replies
View Related
Jul 10, 2011
Here's the thing: When I work in Xfce session or in Xubuntu session (10.10 on Acer Aspire One) the whole DE switches from Xfce to Gnome. I see it not only on the change of the desktop wallpaper, but on application menu, context menu etc. It changes from my Xfce setup, which I know and love, to Gnome and then back in some 1 to 3 second interval. It switches back and forth untill it finally stays on Gnome. I love Gnome, but would like to have working Xfce on this machine.
I googled for similar problems and possible solutions before posting here, but wasn't successful.
View 4 Replies
View Related
Oct 23, 2009
Is there a way via yum to reinstall X/gnome/XFCE?
after the 5.4 upgrade I know longer have a X session. I can ssh in but no X whatsoever (monitor is blank).
View 4 Replies
View Related
Apr 1, 2011
I installed Debian 6.0.1.a on Friday, but the problem is that installing xfce installed a few packages that have nothing to do with it, like Brasero and metacity. I'm using the xfwm but why were these extra packages installed? All I installed at the time were wicd, gdebi, xorg and xfce4. Everything is working fine...but why the extra bits?
View 11 Replies
View Related
Jun 27, 2011
I have been trying to decide which distro of linux i want to use, and i decided to go with debian because i keep reading that it is very stable. I currently am installing it in in virtualbox first to make sure i like it. I wanted to use xfce instead of gnome but forgot to specify that in the beginning. The install takes a while and i didn't want to start all over if that is possible. I am wondering how i could completely replace gnome with xfce.
View 11 Replies
View Related
Jul 16, 2011
After an error occurred i can log in using the recovery console and startx manually.
If i understood correctly recovery mode uses /etc/rcS.d which starts the computer with minimal services and the normal startup is /etc/rc2.d. What can rc3, rc4 and rc5 be used for? Can anyone run different desktops (gnome, xfce, etc) using these runlevels (i am considering that the base system install is the same for all desktops)? Where i can find information about the services that are listed in the rc folders, since some (hibernate, bluetooth, apache2) are not useful to me at the moment.
I am also interested to find out what makes the computer start at it's default runlevel. Is there a way to start rc2 (or rc3, etc) from the recovery mode? When i used to start my computer, it would load into grub, and then it used to get me to the login screen. This is something i would like to avoid (the login screen), and start at the command prompt. My startups are minimal since the computer is always on. I was thinking of 'copying' rcS into rc2 for a normal console start and then start rc3 or rc4 or rc5 to load a desktop.
I am using Squeeze, Gnome, default installation.
View 3 Replies
View Related
May 1, 2011
I've been thinking about moving from Gnome to Xfce for atleast something more lightweight and etc. But I do not know of any good ways to completely remove Gnome without issues and etc. removing all of Gnome? And does Debian Squeeze have Xfce 4.8?
View 14 Replies
View Related
Mar 27, 2011
I am the latest stable Ubuntu (10.10) on an Asus netbook and have both GNOME an XFCE installed. I started with Gnome and than installed XFCE because it works slightly faster on that slow computer. In the beginning everything was fine, but at some point. I don't know when (but it was so also when I was running ubuntu 9.10, before I upgraded to 10). This is what started to happen: when I log in and choose XFCE, I first see my XFCE desktop.
Then it flickers back and forth between my XFCE and Gnome desktop (but the top panel remains the XFCE one), and eventually it settles on the GNOME desktop (which has its own color, different icons in different positions, and its own context menus). The general desktop environment is XFCE: the desktop panel and the itmes on it are XFCE, but the desktop area itself is my GNOME desktop. What I can do to get rid of the display of the GNOME desktop when I choose to use XFCE?
View 5 Replies
View Related
May 31, 2011
Right now I am running 11.04, 10.04, 10.10. and I am using Unity, Gnome 2.32, and Xfce DE. Since 11.04 came out I have tried it with Unity, Gnome 3, Gnome 2.32 and Now Xfce. I have two internal hard drives and one USB hard drive that I use for testing. The two internal hd are running 10.10 and gnome 2.32 and the other running 11.04 and Unity. The USB hd now has 11.04 and Xfce.
After trying 11.04 with Unity and 11.04 with Gnome 3, I find them both designed wrong. They are very clumsy to use. (To many mouse movements and clicks) To many things need to be open and to many things to search for. I spend more time trying to do simple things that use to take me seconds to do in gnome 2.32.
Now that Gnome 3 is out, I believe gnome 2.32 is going away so I am looking for other avenues to go in. I have tried fedora and suse, but don't like the RPM's and there package manager. A few years ago I tried Xfce but liked gnome better.
This morning I decided to install it on a USB drive and give it a test drive. I find I really like it because I do things in seconds again. Things are easy to find and there is some things that are a lot like gnome 2.32. And one of the biggest things I like is it is so customisable. Also it boots very fast even from a USB drive. I believe I will be going to it as my main DE. I always liked Ubutnu and have use it since 2005 so I am glad I can stay with it even though I do not like or plan to use Unity or Gnome 3 in the future. This doesn't mean I will not change my mind, but as of now I do not like either one. Let see what will happen with the 11.10 release. Here are a few screen shots of 11.04 and Xfce.
View 9 Replies
View Related
Aug 19, 2011
I would like to know if and how I can switch my current desktop environment from GNOME(2) to Xfce without re-installing my OS. I am currently running 10.10 Maverick.
View 6 Replies
View Related
Jul 30, 2011
I heard Slackware 13.37 came with XFCE and KDE, but uses KDE as the default. I've used KDE as the default on Debian, so I'm wondering how I switch to XFCE on Slackware.
View 4 Replies
View Related
Mar 18, 2011
OS = Slackware 13.1
I'm normally a KDE user but tried xfce4 and found that it works nicely. I wanted to switch to it for a while. I did find one particular problem: When you try and end the session, you can Log Out but can not Restart or Shutdown. If you click on Restart or Shutdown it asks for password Even after entering a valid password, it will not allow the action.
(I tried user and root's passwords.) It says "Please enter your password." After entering the password it says, "Either the password you entered is invalid, or the system administrator disallows shutting down this computer with your user account." (Before you ask; my user is in power group.)
I tinkered with it for a while and decided it must have something to do with KDM and so I switched my default runlevel to 3 and started xfce4 [via startx] and it worked as expected. Next I tried using xdm instead of kdm and YES, it works as expected. I was able to Restart or Shutdown (no asking for password, it just does it.) What is it about KDM that does not allow xfce4 to restart or shutdown?
View 5 Replies
View Related
Jul 27, 2010
Again when I was working under Xfce system hangs up. Earlier I had similar problems but under KDE so I blamed KDE for that. I am sure that there is something wrong with an access to external input devices. Some kind of a broken connection. I am using a USB keyboard but the same happened with PS/2 keyboard. Two flashing leds, I guess, indicate that device is no longer supported by the system. The only hope for an access to the system is via external wired connection. The other possibilities, I am thinking of, are hardware problems with PCI-bus or a virus affecting on a hardware level.
View 12 Replies
View Related
Jun 4, 2011
I installed almost the complete install. I left off Apache, MySQL and PHP since I wanted to do them myself (which I did and it went fine). I selected KDE as the window manager but now I want to try xfce. When I boot up, I'm left at the command prompt and have to login (probably does that for everybody) then I run startx. That brings up my KDE. Are the xfce components installed and can I use something else to bring up that desktop? Or can I install it and then bring it up at the command after login?
View 12 Replies
View Related
Apr 7, 2011
So I decided I want to switch to KDE because it's kinda neat and I decided I wanted a sleeker desktop. I've heard trying to xinitrc file, but I looked in the file and I have no idea where to start configuring it..
View 1 Replies
View Related
Jan 7, 2016
After I upgraded debian wheezy to debian jassie I cannot find how to switch off the computer from GNOME and XFCE. On GNOME I even cannot see a logout button. Where is it hidden?
View 3 Replies
View Related
