I run Xubuntu 9.10. I can right click on a file and do 'Send to' - 'Mail Recipient' on any file as long as the file is viewed on Thunar. But I don't have the option 'Send to' when I right click a file on the Desktop.
View 1 RepliesI managed to get my hylafax server nice and going, I also setup up AvantFax and Faxy to reach it from the web..What I still want to do it to send a mail from my blackberry device with a JPEG attachment, and have it forwarded as a FAX to the recipient fax machine...
I read and saw a few documentation here and there, but it is very confusing for me...
courier-faxmail seemed nice, but it conflicts with Hylafax..
Hylafax help support is unclear to me...
I'm not sure jpg attachments from blackberry are "standard" jpg, and, I have no idea how to forward this as a fax...
For what I understood, I need to have a running mail agent on my server, and a script to forward this to hylafax..
The scenario: We have an external server that runs HTTP/DB servers for out shop system. Then, there's our local, in-house infrastructure that runs a.. yeah... Exchange 2010. The shop system on the external server needs to send mails to customers (order confirmations, invoices, etc.). seing as sending them directly through the local MTA (Postfix) would cause mail delivery problems because of reverse DNS issues, i've set the Postfix MTA to act as a satellite to our in-house Exchange Server, so the Exchange sends the mail instead, giving recipient mail servers a valid reverse DNS lookup.
Now, mails sent by the (proprietary, uneditable) shop system are relayed correctly and sent to the target e-mail address. My problem is: Mails not sent by the shop system, but by our own PHP scripts which run on that same external servers, are NOT relayed properly. So the Exchange is fine with the mails sent by the shop system, but not the mails sent by our scripts. This is what i get in the mail.log: The successfully relayed mail sent by the shop system:
[Code]....
My company email server has been working flawlessly for the last 5+ years. Recently, one of our clients put their email server behind a firewall (an assumption on my part; details below). Ever since, email sent from within the company (192.168.xxx.xxx internal address; all computers and server is behind a NAT firewall [Netgear FVX538]) is either being sent to the client after some delay (if email is sent using Outlook) or is being deferred until the messages expire (Thunderbird, Squirrelmail, etc.). Email sent to the client from anywhere outside the company (using Thunderbird, Outlook or any other email client) is also delivered without any problems (usually after a short delay).
All other emails to the World are being sent without any problems at all (both inside and outside the company; using any email client or webmail). I did contact the client's postmaster, but the client, being a large government agency, will probably not address the problem (if it is on their side) anytime soon. I am not sure if I can do anything from my end to solve the problem. Ever since the problem with the client began, I added two statements to the postfix configuration file (smtp_pix_workaround_delay_time = 20s and smtp_pix_workaround_threshold_time = 0s); this seemed to a bit - it reduced the delay for emails sent via Outlook to a few minutes (as opposed to 30+ minutes); emails sent using Thunderbird/webmail are still being deferred.
Server details: Dual quad-core processor machine, 32 GB RAM, dual 1 gbps network, running Fedora 14 (64-bit; loosely modeled along the lines of Perfect Server (with ISPConfig2) as described on the howtoforge website). Running Postfix (v. 2.7.1), Dovecot (v. 2.0.9).
Postfix details:
alias_database = hash:/etc/aliases
alias_maps = hash:/etc/aliases
body_checks = regexp:/etc/postfix/mbl-body-deny
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
[code]....
I emailed the client's postmaster suggesting they disable smtp fixup. But still, what bothers me now is that Outlook works (both within and outside the company) while Thunderbird, webmail, etc. (used by ~90% of the users) do not. In addition, all email clients from outside the company can send email (authenticated via the company server) to the client without any problems. Is there anything I can do on my end to make non-Outlook clients work within the company (webmail is hosted on the company server; so, it would have an internal address as well)?
This seems like a relatively simple question, but I haven't been able to figure it out from the documentation after a couple of hours of searching. I'm running postfix on my mail server, and the vast majority of my spam has the sender address spoofed to match the recipient address. I've got spamassassin up and running, and very little gets through that, so it's not a serious problem, but if possible I would like to be able to reject the mail before it arrives to reduce the system load.
Mail is sent locally via webmail, relaying is denied, so the only way that mail should be sent from the domain is via a connection from localhost. The basic idea I'm thinking of is if the MAIL FROM sender claims to be an address at the receiving domain, but is connected from a remote IP, the mail should be rejected.
I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies View RelatedI have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View Relatedthis is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedHow to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
Was told that I need to use Javamail for a project to send mail rather than using "mail" or "mailx". Has anyone here done this?Any pointers or sites you've used and can recommend?
View 1 Replies View Relatedi'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies View RelatedI'm having a problem whereby I'm able to send mail to a mailbox from several different email addresses and SMTP servers (gmail, RoadRunner broadband), but I'm unable to send mail to the same address from one particular account, the SMTP server for which runs on a mediaTemple (dv) 3.0 box with CentOS 5 Final.I've spent a full workday on the forums, trying to troubleshoot the issue, and I'm running out of ideas.The server on which I'm having the mail processing problem is a mediaTemple (ve) running Ubuntu 10.04 x64 (Linux 2.6.18-028stab070.7 #1 SMP Fri Oct 1 13:53:00 MSD 2010 x86_64 GNU/Linux), with ISPConfig 3. Here's how I setup the mail-related aspects of the Ubuntu box:
Code:
apt-get install postfix postfix-mysql postfix-doc mysql-client mysql-server openssl getmail4 rkhunter binutils dovecot-imapd dovecot-pop3d
[code]....
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies View RelatedI have a bit of problem setting up sendmail on my server. I've gotten so far that I can send mail from my mail server and relay mail from my LAN computers through it. Also, local delivery seems to be working.The problem is receiving mail from other domains. When I send mail from my gmail account to any user in my domain the mail gets delivered back to gmail as it exceeds the max hop count.The mail gets bounced between my ISP mailserver which I use as smart host and between my server.The problem seems to be that my mail server won't accept any mail it is supposed to receive.
View 8 Replies View RelatedHow long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies View RelatedI am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedThere is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies View RelatedI'm a complete beginner to administrating my own box - and have installed Ubuntu 9.04 (Jackalope).
I have it up and running - and have installed the applications that I needed.
However, I am unable to get mail to send within the network - I can send mail to external address, such as gmail, yahoo, etc, just not inside my work's network. This includes forwarding services such a spamgourmet - which redirects to my work's email addresses.
potential set up issues I can check for? I am currently using Postfix as my email server.
note: this is what I found in the syslog:
Dec 16 13:55:55 mica-tools postfix/smtp[4248]: 9E014E409E: to=<mica@xxxxxxx.com>, relay=globala.mxsave.com[130.94.123.150]:25, delay=34, delays=0.02/0/33/0.28, dsn=5.7.1, status=bounced (host globala.mxsave.com[130.94.123.150] said: 550 5.7.1 <mica@xxxxxxx.com>,... Relaying denied (in reply to RCPT TO command))
I have setup a mail server on my remote Ubuntu 10.04 server using postfix.
Using Putty to SSH to the server, I can send mail, check mail, and the server accepts mail from other domains (gmail, yahoo, hotmail etc).
However, I cannot seem to send mail using PHP functions.
I have created a "test.php" file with the following contents:
[Code].....
When I run the .php file, nothing happens, and nothing logs in the mail logs, so I'm sure the server doesnt understand the mail command in PHP files, but I'm not sure how to go about fixing it.
Apache2, PHP5, postfix, and the additional necessaries are installed (this is a webserver/mailserver on 1 box)
I was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
I had been using Evolution with no issues though until I installed Ubuntu 10.04 after which I could no longer send outgoing messages. I use a hotmail live account with Evolution. I have also just installed Evolution 2.30 from 2.28 to see if that would solve the issue, but it did not.
View 9 Replies View Related