Ubuntu :: Cannot Get Mail To Send Within Network
Dec 16, 2010
I'm a complete beginner to administrating my own box - and have installed Ubuntu 9.04 (Jackalope).
I have it up and running - and have installed the applications that I needed.
However, I am unable to get mail to send within the network - I can send mail to external address, such as gmail, yahoo, etc, just not inside my work's network. This includes forwarding services such a spamgourmet - which redirects to my work's email addresses.
potential set up issues I can check for? I am currently using Postfix as my email server.
note: this is what I found in the syslog:
Dec 16 13:55:55 mica-tools postfix/smtp[4248]: 9E014E409E: to=<mica@xxxxxxx.com>, relay=globala.mxsave.com[130.94.123.150]:25, delay=34, delays=0.02/0/33/0.28, dsn=5.7.1, status=bounced (host globala.mxsave.com[130.94.123.150] said: 550 5.7.1 <mica@xxxxxxx.com>,... Relaying denied (in reply to RCPT TO command))
View 3 Replies
ADVERTISEMENT
Mar 23, 2011
I have configured sendmail server configuration & its working but I was not able to send mail to other network e.g., yahoo mail, etc.
View 1 Replies
View Related
Oct 11, 2009
I have a couple of servers that are scripted to send cron script output logs to my email address (a Gmail address). Mailx is what I am using, but I didn't have to configure anything; I installed it, and it just worked with the following command: mailx -s "SUBJECT" -r FROMMYADDRESS TOMYADDRESS < FILETOCATANDSEND
This occurs every Saturday and Sunday at noon after my backup scripts run.
I noticed yesterday that I did not receive these logs, so I logged into the machine, started 'mail' and saw messages like this: This is the mail system at host media.deagle.lan.
[Code]....
View 9 Replies
View Related
Aug 19, 2010
I want postfix to send me the root mail to an external account, but I never do it and I don't know how to do it, anyone can explain me how to do it?
View 1 Replies
View Related
Mar 4, 2011
I'm trying to configure postfix so smart daemon can send out notifications emails. My system will need to send emails to a mail server that is on the same local network. I have not had much luck in getting this to work, and am confused on what I need to setup to do this and how to set it up. Does my system need to be apart of the same domain as the mail server? If so, how do I do this? Is there any restrictions sending emails from the command line as the root user? Do I need to configure a relayhost?
Basically all I need to do is send emails to a local mail server, i.e. a mail server on the same local network. I do not need to receive emails. I am rather clueless as to how to set this all up, and what I need for this basic email functionality. I have read and tried many postfix configuration tutorials, but when I try to send out a test email to a email address on the local network mail server I always get "Connection refused" to the server and deferred or bounced status on my test email.
View 2 Replies
View Related
Aug 13, 2010
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
mydomain.tld3600INMX0 mail.mydomain.tld
mail.mydomain.tld 3600INAmyNumericalIp
So now my system is receiving MX content but i dont know what to do.
View 9 Replies
View Related
Apr 20, 2010
I use Evolution mail and use 2 PCs When I send mail it saves it to my current PC but not to the other PC so instead i want it to save the sent to the email server i'm using.
View 3 Replies
View Related
Jun 1, 2011
I have set up postfix and dovecot as per the Ubuntu anual and appear to have a functioning mail server.Using the sendmail command I can send mail and I receive mail in ~/Maildir. Using Thunderbird I can read any mails received but I can't send any mail from Thunderbird. I have tried with both STARTTLS and SSL/TLS and whilst I get the prompt for a password I keep getting the message my password for my server is wrong.I have ports 25, 465, 587 and 993. Is that all the right ports?When I ping my domain name it resolves to my router name whereas I believe it should resolve to my IP. Could there be a problem with my host file? I've had a play but to no avail.Here's the error in mail.log.
Code:
westwood@westwood-desktop:/etc$ tailf /var/log/mail.log
Jun 1 19:00:33 westwood-desktop postfix/smtpd[2376]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN
[code]....
View 2 Replies
View Related
Jun 30, 2011
I set up my mail server using the guide here: [URL] I am able to receive mail, I can send mail locally, but I can't send to external addresses. This is in my mail.log: Quote: Jun 30 14:40:43 Server postfix/smtp[10725]: 2FD9322015BF: to=<myemail@gmail.com>, relay=none, delay=1634, delays=1484/0.02/150/0, dsn=4.4.1, status=deferred (connect to alt4.gmail-smtp-in.l.google.com[74.125.65.27]:25: Connection timed out)
This is my main.cf:
[Code]...
View 6 Replies
View Related
Jul 20, 2011
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies
View Related
Nov 15, 2010
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies
View Related
Sep 9, 2010
this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
View 5 Replies
View Related
Feb 15, 2010
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies
View Related
Jun 8, 2011
How to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies
View Related
Nov 19, 2010
I'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
View 9 Replies
View Related
Mar 30, 2011
i have an server which have my site on it, server have an public ip and site works fine..the thing that i done to enable mail server is :
1.select sendmail option as mail server(in joomla).
2.install and configure sendmail in server (which ubuntu installed on it )
**if i use my website locally mail server works fine i can send message and receive , but when i use web site from Internet mail server seems not working at all
View 1 Replies
View Related
Apr 22, 2010
i basically had this system installed for our mail system.The setup is as follows:
1. Operating system installed is Debian ver. 5.0.3
2. Roundcube is installed as a webmail(if its right for me to say that)
3. The server is hosted right here at our offices
4.The server uses relay system to send mail i.e. relays all our mails to our ISP
That all i can say about the configurations becuase thats as much as i understand it.The problem now is that we are not able to send or recieve emails from both internal and external.I tried to send mail to a collegue in the office who is on our local LAN,Roundcube says sent successfully but the person does not recieve the mail.i tried to send to my yahoo address but nothing.I dont know where these mails have been trapped.
View 5 Replies
View Related
May 4, 2010
I am trying to do something really simple with Exim. I have two machine connected together via a hub. They can ping each other. They each are running openSuse 11.2 and have Exim installed. On each machine from the command line in start Exim as a daemon by typing: sudo /usr/sbin/exim -bd -d and each machine runs through some output and sits there "Listening". Then on either machine I try to send a mail message of the form mail
(or mailx) <user>@<other node>
some text
EOT
and absolutly nothing happens! I must be doing something wrong or daft which is very basic, but I have searched all over and cannot get it to work.
View 2 Replies
View Related
Nov 30, 2010
Was told that I need to use Javamail for a project to send mail rather than using "mail" or "mailx". Has anyone here done this?Any pointers or sites you've used and can recommend?
View 1 Replies
View Related
Apr 21, 2010
i'm trying to send a mail with "mail" on my cent os console , but without success. In Suse it's quite simple with "mail": mail -r sendersaddress@domain -s "subject" targetaddress@domain </tmp/filewithcontent
View 6 Replies
View Related
Feb 25, 2011
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
View 116 Replies
View Related
Feb 27, 2009
I have been able to use the mail program on my old Ubuntu instasll which I found quite handy. However, it isn't functioning "out of the box" like I expected. I've tried to configure it as mail was in Ubuntu to no avail.
View 4 Replies
View Related
May 21, 2010
I have a bit of problem setting up sendmail on my server. I've gotten so far that I can send mail from my mail server and relay mail from my LAN computers through it. Also, local delivery seems to be working.The problem is receiving mail from other domains. When I send mail from my gmail account to any user in my domain the mail gets delivered back to gmail as it exceeds the max hop count.The mail gets bounced between my ISP mailserver which I use as smart host and between my server.The problem seems to be that my mail server won't accept any mail it is supposed to receive.
View 8 Replies
View Related
Apr 8, 2010
How long normaly keep the mail server send mails on the outbox queue and try to send? What about hotmail, gmx and gmail mail server?
View 1 Replies
View Related
Jul 13, 2010
I am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies
View Related
Feb 22, 2011
There is an requirement, intranet people they may not have internet access but they want to send mail to external domain(internet),but in that intranet network one machine can have internet access. Is there any solution for this requirement.
View 2 Replies
View Related
Mar 3, 2011
I have setup a mail server on my remote Ubuntu 10.04 server using postfix.
Using Putty to SSH to the server, I can send mail, check mail, and the server accepts mail from other domains (gmail, yahoo, hotmail etc).
However, I cannot seem to send mail using PHP functions.
I have created a "test.php" file with the following contents:
[Code].....
When I run the .php file, nothing happens, and nothing logs in the mail logs, so I'm sure the server doesnt understand the mail command in PHP files, but I'm not sure how to go about fixing it.
Apache2, PHP5, postfix, and the additional necessaries are installed (this is a webserver/mailserver on 1 box)
View 9 Replies
View Related
May 29, 2010
I was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
View 1 Replies
View Related
Jun 17, 2010
I had been using Evolution with no issues though until I installed Ubuntu 10.04 after which I could no longer send outgoing messages. I use a hotmail live account with Evolution. I have also just installed Evolution 2.30 from 2.28 to see if that would solve the issue, but it did not.
View 9 Replies
View Related
Oct 30, 2010
I want to forward mail from the evolution mail program (2.22.3.1) to my gmail account.
View 2 Replies
View Related
