Ubuntu Security :: Chroot Without Internet Connection?
Oct 26, 2010
I was hoping to set up a Kubuntu 10.04 Chroot on a PC with no internet access (I only have dialup anyway, not Broadband). All the information I have been able to find refers to downloading debootstrap in order to do this.I purchased a set of DVDs with all of the Ubuntu packages on them and created a single repository of them on my harddrive.Is there some way that I can create the Chroot using the packages on my hard drive without having to access the internet to download stuff as I do it?
View 6 Replies
ADVERTISEMENT
Jan 1, 2011
I am running ubuntu 10.10. I recently enabled the firewall and installed Firestarter to configure it. Bad decision apparently. I can't connect to the internet using Firefox unless I first stop the firewall using Firestarter. After I do that, Firefox connects to the internet just fine.
If I uninstall Firestarter, will the ubuntu firewall function as it did originally, before I configured it? Or will it continue to function the way it does right now, which doesn't allow me to connect to the internet?
View 9 Replies
View Related
Jan 18, 2011
There is this active connection in firestarter: ec2-174-129-193-12.compute-1.amazonaws.com (Port 443 - Service HTTPS - program python)After doing ps aux | grep PID it shows: /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon...This comes up in the firewall in each login, how do I get rid of it and how did it get there in the first place? Another question is if there is a way to limit a program's access to the internet. For example KCalender.. The things I type up in there may be stored somewhere. How can I disable complete access to the internet for that program and any other program so they can't backup, share, check etc. ?
View 3 Replies
View Related
Mar 15, 2009
SElinux is blocking my internet connection and every time when I connect t the internet (pppoe connection) I ge message.
View 2 Replies
View Related
Feb 2, 2010
I have several Proxy severs set up at our business. I always do the same basic config, except for my version of Fedora (I always grab the newest).
I put 2 nics in a machine Load Squid, Dansguardian and Firestarter. I use Firestarter to direct the surfing traffic from my LAN out a cable modem that I have for each store. This lessons the bandwidth on the T1.
Easy enough. My problem is Firestarter has always been a little flaky. But as of F11 the gui wont stay up for more than a few minutes at a time. It still functions, but you have to be quick if your going to use it because it will inevitable crash.
So I suppose it's time to start doing this the correct way and using IP Tables. Does anybody have a resource they can point me to that will help me understand how to do this? It looks like this might be as simple as setting it up with the GUI Firewall tool that comes with F12 but I'm still not exactly sure how.
View 6 Replies
View Related
Aug 7, 2011
I've got my netbook set up so that I can run a SOCKS proxy via my desktop machine. This works fine at home, but I'm wondering what happens at an internet cafe with public wifi.
Specifically, the connection needs initially to be set up with an ordinary direct internet connection so that I can log in to the cafe's router. I'm concerned that when I then set the network proxy to SOCKS host, the router will cease to recognise me and will disconnect me. This particular detail doesn't seem to have been covered in any instructions that I've seen (maybe I haven't looked hard enough).
View 5 Replies
View Related
Jul 12, 2011
recently we decided to make our own panel (like Plesk or cPanel) but for Ubuntu and it will be licenced under GPL (like any other professional sofware).want to make a panel not only that fits our needs but also the needs of other system administrators and domain owners. We researched other panels and found out that non of them has security/look/ease of use in one package. Bad codig is another problem found in other panels.I made a short overwiev of what I think we have to have in the beginning.I Security :1. Completely chroot enviornoment where every single service is in chroot mode (bind,mysql, postfix, .... )2. Easily managed IPtables trough web-based interface. 3. Coding rules has to be strict.
II Software selection :
1. MTA - Postfix
2. POP - dovecot
[code]....
View 7 Replies
View Related
Mar 24, 2010
Its been two days over, after my search started . But I didn't find answer any where ?. I need to call chroot as part of normal user, but to my surprise it can only be called by SUper user with CAP_SYS_CHROOT capabilities. I am not sure how to add this capability to my user .
View 10 Replies
View Related
May 26, 2011
I'd like to run a Tor relay, but am trying to understand the security implications. For some time I've run my torrent client in a VirtualBox virtual machine, which is run as a very non-prived user, bridges directly to The Internets, and writes to one directory on the host. My belief is this is about as secure as it can be, but am open to suggestion.If I run a relay in the VM it wouldn't be associated with my use of Tor as a client, which is fine since there is no technical need for them to be connected and it's desirable for security.I read that chroot jails can be broken, particularly when run as root, so I don't really trust that. Also studied a vserver, but it must share the network setup which doesn't strike me as isolated enough.
View 14 Replies
View Related
May 4, 2011
I want to make a sandbox for my music streaming server(subsonic). I was going to make a directory and chroot to it. I don't really have any room on my HD for new partitions. For the sandbox/chroot jail to be proper does it need to be on a seperate filesystem/mount point?
View 1 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related
Apr 2, 2010
I have one requirement i.e I want to call the java file from the php function using shell_exec command , i am using the chroot jail concept , if i using this command i am getting the empty file because java environment is outside the chroot jail,so how to access the the files those are out side the chroot jail.
View 3 Replies
View Related
Aug 12, 2010
Basically they all cover running a 32bit app running on 64bit host and so on.I want to have an isolated system in total chroot (running lighttpd, mysql, ssh, etc from there).(For security reasons I have to isolate the dev from the live one.) So I installed the chroot environment, mounted all the neccessary things and chrooted in. Everything went fine. Edited /etc/ssh/sshd_config to use port 22222 instead of 22. Used service ssh start then. It says service running but if I try this: ssh -p 22222 localhost I get "Connection refused". The chrooted is system is very minimal so far so there is no firewall, hosts.allow/deny or anything.
ps.: The chroot environment will be a development area as I already mentioned. I thought chroot is the easiest way but if you say KVM is better or something I can go for it. The machine is easily capable of running even 10 VMs easily.
View 1 Replies
View Related
Mar 27, 2010
chroot in two mini distros (Tiny Core and SliTaz): chroot jail appears 'blind'. Chroot can't find any files in the jail and exit with error code. Example (ugly):
Code:
# mkdir /mnt/test
# mkdir /mnt/test/bin
# mkdir /mnt/test/dev
# mkdir /mnt/test/proc
# mkdir /mnt/test/lib
# mount /dev/hdb1 /mnt/test
# mount -t proc none /mnt/test/proc
[Code]...
chroot: cannot execute /bin/bash: No such file or directory Where is the problem?
View 4 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Jan 26, 2010
It is most certainly my fault but I am now without a sound volume control and it does not show up in the add to panel.What can I do here? Does your icon have code that that I can use or can I find the file somewhere and create a link? Alsa mixer works ok and nothing is muted and I have sound so as to play music. The Internet connection and the power connection icons also don't appear.
View 5 Replies
View Related
Jun 4, 2010
After upgrading to Ubuntu 10.04, I'm not able to make any connection to the internet with either my netbook through WiFi or my computer on wired LAN. I can, however, ping my Solaris machines and Macbook. How do I fix this?
View 9 Replies
View Related
Oct 21, 2010
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies
View Related
May 1, 2011
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies
View Related
Apr 15, 2011
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
View 4 Replies
View Related
Jun 25, 2010
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
View 14 Replies
View Related
Mar 29, 2010
Conky can be used to display a variety of information on the users desktop. I wanted to use Conky instead to display the current status of security as reported by:
SANS Internet Storm Center
IBM Internet Security Systems
Symantec Threatcon
McAfee Threat Center
I therefore created 4 small scripts which download the current status from these sites, and set the colour of those status's depending on the current value.The conky configuration allows for a semi-transparent background - though this is optional.Attached is an example image showing the 4 different colours.Also attached is an archive with the 4.sh files, .conkyrc and draw_bg.lua (from here http:[url].....
View 2 Replies
View Related
Jun 21, 2009
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
View 3 Replies
View Related
Feb 4, 2010
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies
View Related
Jul 5, 2011
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
View 7 Replies
View Related
Dec 16, 2010
Do you know guys are there any good reliable Internet security or Anti virus software for ubuntu OS? Don't tell me linux is virus free os. I have dual boot PC so i want some security suite for that?
View 11 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Jan 11, 2011
I chose not to use a security key upon installation to access he net but now wish to change this.I do not understand the help section.It has a login key but I don't understand how it works or how to edit or see what the command for it is
View 6 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Feb 23, 2010
I got a dsl broadband connection....I have dual booting on my lappy(Windows7 and ubuntu 9.10)....my problem is i cannot set up the internet connection in ubuntu while i am using the connection in windows7....I am a total newbie in linux
View 3 Replies
View Related
