Ubuntu Security :: Firestarter Prevents Internet Connection?
Jan 1, 2011
I am running ubuntu 10.10. I recently enabled the firewall and installed Firestarter to configure it. Bad decision apparently. I can't connect to the internet using Firefox unless I first stop the firewall using Firestarter. After I do that, Firefox connects to the internet just fine.
If I uninstall Firestarter, will the ubuntu firewall function as it did originally, before I configured it? Or will it continue to function the way it does right now, which doesn't allow me to connect to the internet?
View 9 Replies
ADVERTISEMENT
Feb 5, 2010
At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
View 2 Replies
View Related
Sep 11, 2010
A portscan reveals that port 39878 is 'open', service: 'unknown. I deny service for this port in Firestarter FW 'policy' Firestarter does not show any active connection. I am not running any apps, so how can I close this port?
View 9 Replies
View Related
Oct 26, 2010
I was hoping to set up a Kubuntu 10.04 Chroot on a PC with no internet access (I only have dialup anyway, not Broadband). All the information I have been able to find refers to downloading debootstrap in order to do this.I purchased a set of DVDs with all of the Ubuntu packages on them and created a single repository of them on my harddrive.Is there some way that I can create the Chroot using the packages on my hard drive without having to access the internet to download stuff as I do it?
View 6 Replies
View Related
Jun 24, 2011
I didn't see another thread about Google Picasa being blocked by SE Linux. How do I tell my machine to allow it to run? I have the same problem with a program called Smartboard that I have installed but can't open.
View 1 Replies
View Related
Apr 27, 2010
I have an Asus 900 laptop that I put Ubuntu 9.10 on.I know it was made by the Chinese, but why are they trying to hack my pc?I currently put FIRESTARTER a linux firewall on board you can go here to get itNow I can see everyone's IP address and find out where they are and who they are!!
View 9 Replies
View Related
Sep 15, 2010
I was wondering if firestarter (software firewall) works out of the box or does it need some kind of configuration in order for it to provide protection? Is firestarter even needed with ubuntu?
View 6 Replies
View Related
Mar 8, 2011
im having a bit of a problem with Firestarter, i have Transmission opened and i am downloading a movie but when i check Firestarter i see hundreds and hundreds of Ip's that are blocked, and like 10ip's every second that get blocked.
[Code].....
View 2 Replies
View Related
Jan 18, 2011
There is this active connection in firestarter: ec2-174-129-193-12.compute-1.amazonaws.com (Port 443 - Service HTTPS - program python)After doing ps aux | grep PID it shows: /usr/bin/python /usr/lib/ubuntuone-client/ubuntuone-syncdaemon...This comes up in the firewall in each login, how do I get rid of it and how did it get there in the first place? Another question is if there is a way to limit a program's access to the internet. For example KCalender.. The things I type up in there may be stored somewhere. How can I disable complete access to the internet for that program and any other program so they can't backup, share, check etc. ?
View 3 Replies
View Related
Apr 19, 2010
I am new to Ubuntu and till now I have chosen it to be my favorite distro. I use my laptop in various networks, home, work, school. When I run firestarter the wizard does not give me the option for wireless INTERNET, only ethernet.
View 2 Replies
View Related
Oct 20, 2010
I've been using Firestarter for a while and have used it to set-up inbound and outbound policies (which are probably way too restricitve) but since turning on boot logging the other day I have noted that the boot log contains the message:
Code:
* Starting the Firestarter firewall [fail] I find this somewhat alarming. I have seen post[URL].ht= firestarter (although have not added it the auto startup list and do not wish to have it start without the root password). What I would like to know is as the computer boots up does it set the iptables to their last setting irrespective of whether firestarter starts or does firestarter need to start to set the iptables and therefore my policies?
View 2 Replies
View Related
Jan 26, 2011
what files does firestarter change? I would like to know so I can look at the files so I can learn to do the same thing without firestarter.
View 3 Replies
View Related
Apr 6, 2011
I am running Ubuntu 10.10 I have an question about the firewall Firestarter, when checking the firewall it told me there are 9 serious incoming connections what must I do with this info. Inbound is normally blocked as standard i have also see that someone with port 1234 and 12345 have trying to attempt mine system but failed all trojan ports are fully blocked.
View 2 Replies
View Related
Apr 27, 2011
i just installed Firestarter firewall and it is showing me 12 serious inbounds after an hour.Is it a serious matter ? What should i do ?
View 3 Replies
View Related
Mar 15, 2009
SElinux is blocking my internet connection and every time when I connect t the internet (pppoe connection) I ge message.
View 2 Replies
View Related
Feb 2, 2010
I have several Proxy severs set up at our business. I always do the same basic config, except for my version of Fedora (I always grab the newest).
I put 2 nics in a machine Load Squid, Dansguardian and Firestarter. I use Firestarter to direct the surfing traffic from my LAN out a cable modem that I have for each store. This lessons the bandwidth on the T1.
Easy enough. My problem is Firestarter has always been a little flaky. But as of F11 the gui wont stay up for more than a few minutes at a time. It still functions, but you have to be quick if your going to use it because it will inevitable crash.
So I suppose it's time to start doing this the correct way and using IP Tables. Does anybody have a resource they can point me to that will help me understand how to do this? It looks like this might be as simple as setting it up with the GUI Firewall tool that comes with F12 but I'm still not exactly sure how.
View 6 Replies
View Related
Aug 7, 2011
I've got my netbook set up so that I can run a SOCKS proxy via my desktop machine. This works fine at home, but I'm wondering what happens at an internet cafe with public wifi.
Specifically, the connection needs initially to be set up with an ordinary direct internet connection so that I can log in to the cafe's router. I'm concerned that when I then set the network proxy to SOCKS host, the router will cease to recognise me and will disconnect me. This particular detail doesn't seem to have been covered in any instructions that I've seen (maybe I haven't looked hard enough).
View 5 Replies
View Related
Jul 22, 2010
I am trying to set up a computer to act as a firewall/gateway on my network, and am using the Firestarter program to do this. Everything appears to be set up correctly, and I followed the instructions on their website completely, and I get an error message when I try to start the firewall. It says that eth0 (my internal NIC) isn't ready, and to make sure it's active.
View 3 Replies
View Related
Jul 18, 2009
Running Fedora 10 and 11. Using Firestarter firewall.Does anyone know where Firestarter gets the Events which it displays?I do not find anything in /etc/firestarter/.I suspect Firestarter looks in a log file which Fedora keeps somewhere.
View 2 Replies
View Related
Sep 19, 2010
What is the absolute quickest or easiest way to block an incoming connection by their IP address? I'm running an apache2 LAMP server on Ubuntu 8.10. For example, let's say I'm watching my server error logs and I see someone using a script to check for phpmyadmin and other such folders. Right away I know this is a hack attempt. Firestarter does not allow ANY way to block an incoming connection by IP (to my disappointment) and adding the IP to an apache configuration file requires an apache restart (way too much trouble and time).
View 5 Replies
View Related
Mar 11, 2011
Just want to stealth ports on my laptop. Had problems with firestarter when I installed in on 10.10. Set Firestater back to defaults and then dumped it with:
Code:
sudo apt-get purge firestarter
Set up Gufw to defaults and now am not sure what I am seeing with iptables.
iptables -L shows .....
Do these settings look correct for default settings for Gufw? or do I still have some problems with the old firestarter settings not being removed. All I want is all ports stealthed. I know that ping is enabled but I believe that is a default setting in ufw. Could I restore iptables to default with:
Code:
sudo iptables -F
and then enable Gufw and set default?
View 5 Replies
View Related
Jun 30, 2011
A couple of years back, just getting into Ubuntu, I installed Firestarter as an option to aid in networking. Realizing that it really didn't help in my plan, I now want to remove it.In terminal, I typed:
Code:
sudo apt-get purge -y firestarter
I rebooted, only to find out that I now have no internet connection.
[code]....
View 1 Replies
View Related
Aug 30, 2010
the following security alert made me checking my httpd.conf:
Code:
Summary:
SELinux is preventing the http daemon from reading users' home directories. Detailed Description: SELinux has denied the http daemon access to users' home directories. Someone is attempting to access your home directories via your http daemon. If you have not setup httpd to share home directories, this probably signals an intrusion attempt. Even though in httpd.conf there is a line that reads
Code:
LoadModule userdir_module modules/mod_userdir.so
in the same conf-file the access to home-dirs is disabled:
Code:
<IfModule mod_userdir.c>
[Code]....
View 12 Replies
View Related
Mar 2, 2010
Since yesterday Firestarter has been prompting me that it is blocking external connection attempts as shown in the picture below:I'm not even going to bother covering the IP addresses because I personally don't see why I should care but as you can see, there has been loads of them attempting to connect to ports 3674 - 3675. I ran nmap 127.0.0.1 and it came back as 631 being the only one open. So then I thought maybe lsof -i would mention much more but all it shown was:
@boris:~$ cat meh
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
cupsd 1644 root 5u IPv6 14329 0t0 TCP localhost:ipp (LISTEN)
[code]...
View 1 Replies
View Related
Feb 26, 2010
I am running Firestarter on Ubuntu 9.10 64 bit. I have noticed several times that after closing all web apps (Firefox, Thunderbird) that some entries remain under the heading "Active connections" on the Firestarter "Status" tab. Often these show no source program. Currently I have 2 showing which show Firefox as the source. These persist after Firefox is shut down. I have verified that no Firfox process is running. And both of the IPs point to google.I have Disconnected eht0 and they still show. I have logged out and back in and they still show. I must reboot the machine to make these entries go away. Which makes me think perhaps this is a bug in Firestarter(?) Is there another way I can identify truly active connections?
View 2 Replies
View Related
Aug 15, 2010
There are far too many 'events' in Firestarter's log. I can't find which file contains the log either by searching my file system or the internet.
View 4 Replies
View Related
Feb 3, 2011
I gave a presentation on the Firestarter Firewall interface at my local LUG meeting tonight (another member followed with a presentation on iptables).You can download a copy of the handout from this link.
View 3 Replies
View Related
Mar 17, 2010
I got alarm on Firestarter showing attack from samba service on port 139 . Is that ok for my host computer ? or a serious attack .
View 9 Replies
View Related
Aug 19, 2010
I am trying to configure Bittorando and iptables using Firestarter. I have got it working but am concerned about security holes.
Let me explain.
AIUI, the Bittornado program contacts the "tracker" on various ports which (from the previously blocked connections in Firestarter) ranged from 4664 to 65532. Therefore, currently I have set this range to be open to allow downloads of the torrent.
However, this seems, IMHO, to devalue to point of having a restrictive exit policy for Firestarter since now virtually all ports are open. I can see nothing on the Bittornado client to restrict the outgoing ports although the "listening" (incoming) ports can be restricted.
I would prefer to have my system locked-down so that the minimal number of ports are open to initiate external connections so is there any way to achieve this with Bittornado?
View 9 Replies
View Related
Jan 9, 2011
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies
View Related