I have been reading through the linux guide as the bash tutorial said i should before learning bash.
The Guide told me i shouldnt use the administrator account as my everyday account so i added a new user but the network manager doesnt show and i cannot connect to my wireless internet. I have approved the secondary account to access the net and everything but i cant figure this out.
I can SSH to my own box using "ssh -X arancaytar@localhost" and run graphical applications. When I try the same using "ssh -X chris@localhost", I get an error message saying
Code:
chris@enki:~$ gedit
X11 connection rejected because of wrong authentication.
[code]....
Well the thing is i cannot connect to a wireless network, when i log in the nm-applet won't show, if i wait about 20 minutes it will show .. and if i clicked on it requires a password, when i enter the password it freezes!! i tried uninstalling the nm-applet and reinstalling it, didnt work
View 5 Replies View RelatedI want to add a user that can connect to wireless networks, use all the video and audio stuff etcetera.
i know to use the User and Group management application for that. but how do i enable their use of the wifi, video and audio stuff please?
If user1's main group is genetics and one wants to add him/her to group biochem and to assign biochem as his/her secondary group will the following suffice ?
Code:
$ sudo usermod -G biochem user1
I would like for user1 to have genetics as the main group but also belong to biochem. When user1 creates a file, as he/she belongs to main group genetics, I assume the file will be owned by user1 and group owner will be genetics. Ideally files created by user1 should be accessible to users in group genetics(when permissions are tweaked) but not by individuals in group biochem. However, any files with group owner biochem should be accessible to user1 as he/she does belong to biochem as a secondary group. Would having user1 main group genetics, secondary group biochem fulfil this criteria ?
I'm trying to create a user account for my children in Ubuntu 10.04
When creating their account, I have turned off the 'Connect to ethernet and wireless' option of the Advanced Settings.
However, when I log into their accounts, they still have full access to the internet through both the wireless and ethernet connections. Is this option for some other purpose?
Is there an alternate way to limit internet access for childrens' accounts in Ubuntu? (I'm used to MS Family Safety as a filter for internet access - is there an eqivalent for Ubuntu?)
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View Relatedwlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
I got ubuntu working fine on my netbook and wanted to play around with opensuse. I have it installed and everything works fine except my wireless connection. I have updated everything since the installation through a wired connection, that didn't help. I have read the stickies, but to be honest, I'm so new to this stuff I'm kinda lost. So my wireless network has a WEP encryption and I have entered that password as a 64 HEX Key in the Wireless Manager widget. It connects to the network and says is labeled as active, however there is still the yellow exclamation shield next to the connection. Firefox and other apps don't have access to the internet.
View 9 Replies View RelatedCode:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
[Code]...
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
View 5 Replies View RelatedI've got openSUSE 11.3 running via liveUSB on a netbook and no matter how many times I try, I cannot get wireless to connect to my network.
My network is:
- non-broadcast
- WPA2 Personal
- G
The netbook is fairly recent from Asus and wireless works perfectly with Fedora 11 and Windows XP.
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies View RelatedI am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
I just upgraded and then re-downgraded kde and wireless has stopped connecting (it still seems to be working, just not the way it should). Here's some info:
Code:
/sbin/lspci -v
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation Device
[Code]....
I can connect to my wireless router while logged in as root, but not under my user account. I went into YAST and the user maintenance area and gave myself every permission (Add, Edit, Delete Users or Accounts), but kde network maanger will not allow me to connect to my router.
View 5 Replies View RelatedI'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
View 9 Replies View RelatedI have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
View 6 Replies View RelatedI recently bought Dell Studio 15 laptop, installed OpenSUSE11.2/64 in addition to Win7 64 bit. I am trying to connect it to my wireless network at home and at work, but without much luck.
1)Found out that Dell 1520 WLAN adapter has Broadcom 4353 chipset.
2)saw that b43-fwcutter installed
3)installed broadcom-wl and broadcom-wl-kmp-desktop
After that can see many wireless Access Points at home,selected one via NetworkManager (eth1), configured it (incl. security same as in Win7), it goes from Activating to Active, but I still can not connect - I mean, in the FireFox - "page not found"
iwlist scan (for my desired AP):
Cell 03 - Address: 00:E0:98:FA:5D:1A
ESSID:"Blackhawk"
Mode:Managed
[code]....
I can easily connect to WLAN at home and at work in Win7.
One of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
View 5 Replies View RelatedI read the thread about the b43-tools but the git command on there fails.
git clone [URL] Initialized empty Git repository in /sbin/b43-tools/.git/ fatal: [URL] not found: did you run git update-server-info on the server? I am assuming the server is them not me? I have installed the firmware per my dmeg request. And the firmware is installed correctly.
[Code]....
The card works it just will not connect. I think I have that rev 3 issue where I need to edit the SPROM but I can not seem to get the b43-tools installed.
I need help configuring to set my wireless to connect automatically on boot up. Right now I do have wallet on with a password.
View 1 Replies View RelatedMy wireless is a libertas 88w8335. Suse 11.4 just installed. For this one, I need a windows driver with ndiswrapper. ndiswrapper is installed, and the driver as well.
I can see my networks with iwlist scan my network is set up in yast with ifup (I can scan the networks and find mine), but I cannot connect to my Acces point : there is no SSID with iwconfig.
Suse on an (old even) laptop is even more fun that it is on a desktop. BUT, I still cant get my wireless to work! I have the Encore ENUWI-N3 USB adaptor. Suse sucessfully detects my USB device, recognize its a Wireless lan network adapter, installs it as such (gives it its driver) and adds my wireless menu under network manager. (it gives it the rt2x00) I can enable / disable the USB device from there (its light corroborates that.
So all in all, suse installs my wireless. But I CANNOT find any AP when I scan. Under the "scan" tool (under connec to wireless > A wireless network ect ect) I find no APs. Adding the SSID of the AP manually is of no help either. And the command sudo /usr/sbin/iwlist scan merely gives - "wlan1 Scan completed" and nothing else. Check ifconfig - not a frame sent/received.