Ubuntu :: Saving OS Configuration - Reimage Hard Drive?
Jan 31, 2011
In MS Windows, I used a program to re-image my hard drive. It was a great way to keep my OS configurations backed up in case of trouble. Linux is more stable, but I'm capable of doing more damage to it. So is there a good way to re-image this HD? I don't see the old MS program (Acronis) for Linux. Or, is there a way to save all of the synaptic programs I have downloaded so that I could more easily reload them if needed?
Device Boot Start End Sectors Size Id Type /dev/sdb1 16065 584830259 584814195 278.9G f W95 Ext'd (LBA) /dev/sdb5 16128 584830259 584814132 278.9G 7 HPFS/NTFS/exFAT
I have 2 hard drives both are 278.9GB in a mirror raid 1. Why does 2 partitions show up? Are they referring to each physical hard drive? I want to believe that this is the same partition and not two different physical hard drives since both are in the same 'start' and 'end' range. Is that correct?
I am new to debian and recently I have been working with a debian server. I have been asked to find out how to create a script that you can run or can be run by another program to format and mount a new hard disk?
I have problems with the system harddrive. I would like to install my Debian on to a new HDD with the same configuration and packages. How do I get the configuration to the new Debian. What files/directory do I need to copy? How do install the same packages?
My problem is that my debian in hard drive 1 wont load, gives me a fatal error.
This is my computer: Hard drive 1 (1TB): broken debian 333gb, windows7 666GB (approximately) Hard drive 2 (250GB): debian (working fine, im using it now).
Details: I tried to install some webcam software thing and I think somehow i deleted some system files... ...So now when I start my computer, grub loads and i choose Debian on hard drive 1,i click it but when it goes through the list of things, it says
FATAL ERROR /lib/modules/2.6.32-5-amd64/kernel/fs/fuse/fuse.ko: No such file or directory
And it just goes to a blank screen with a blinking cursor.
Now that's not all. I did something else wrong... I ran Gparted from a usb stick to create an extra partition on hard drive 1 because i was trying to install another linux on it or something so I can access my computer.
But, when I tried to shrink it and create an extra partition on the disk of about 150gb, it was taking so long and i read that it may take about 40 hours, so i turned it off after a few hours. So, I may have created more problems than my original problem.... I can still boot into Windows 7 though.
So now i have: Hard drive 1 (1TB): broken debian about 120gb, windows7 666gb (approximately), free partition Hard drive 2 (250GB): debian (working fine, im using it now).
Also, of interest: When I look at the folders of the messed up debian, there is nothing in the /lib/modules/2.6.32-5-amd64/kernel folder. Empty.
So basically. my problem is that I get the fatal error, and then maybe i create some extra problem by stopping the partitioning when it wasnt done. so please help me try to fix the fatal error first
I am making backups and I need to make a cron job that mounts a 2nd local hard drive.
It is not listed in my fstab file and I mount it manually in nautilus (having to type a password). It is designated as /dev/sdb1 and /media/repo when it is mounted. Can I get cron to mount it and then add the password or do I have to add it to fstab?
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have had Ubuntu desktop on my PC for a year now and am very happy with it. A couple of months ago I got a Ubuntu server 10.04 for playing about with. I have installed the gui, for personal reasons, but I want to upgrade to 10.10
Whenever I attempt the upgrade my server becomes unbootable and I have to reimage and start again. I have even tried performing the upgrade before I install the GUI but it still makes no difference.
Although I have the GUI I am doing the upgrade via command line.
Upon watching the upgrade in process, I find that no errors are occurring. Could it be something to do with my server provider?
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I like installing and trying out Linux distributions on my computer. However, rather than burn the .iso files to a CD or DVD, why not use free space on my hard drive instead? Is this possible? It would certainly make things easier on me.
I currently have installed Debian 5.0.7 and Linux Mint Debian Edition. For those who do not know, LMDE is based on Debian Testing and uses the same repositories. Also, I have 80GB free on a 300GB drive. Id like to use part of the space as an "installer partition", where I can install installer .isos, boot off that partition, and install from there onto the additional free space.
OpenSUSE 11.3 x86_64 Live USB disk only one HDD with OpenSUSE as the only OS.the HDD is fine so i know it is not a hardware problem.this is different from my other (grub) problem as this is a different PC.the installer has been stuck for over an hour at 92%/Saving Bootloader configuration.maybe i can try the installer in text mode to get more info? is there a text mode for the installer?
An external 3½" HDD seems to be in danger of failing” it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach.
I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors.
Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all.The filesystem of the partition is ext3.
After an automatic update from Debian I get the following error while starting a root terminal: An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly. Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have a PC104 running debian. I have 3 hard drives (in addition to the one booting) mounted in fstab by UUID. I use the options defaults,error=remount-ro. However, this means that when I boot with the hard drives not attached, I have to press Ctrl-D to bypass when the boot discovers the drives are missing. Is there a timeout commandoption I can add to fstab so that it automatically continues booting even if the hard drives are not attached? I could not find anything on a timeout command. (I tried adding timeout=1000 but no-random guess)
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
I receive these messages after I enter my user_id and password in Ubuntu 9.04;
"An error occured while loading or saving configuration information for update notifier. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
then there's another error message;
"An error occured while loading or saving configuration information for evolution-alarm-notify. Some of your configuration settings may not work properly." then clicking on details box this can be seen;- {Failed to connect configuration server; some possible causes are that you need to enable TCP/IP networking for ORBIT, or you have stale NFS locks due to a system crash. See http://projects.gnome.org/gconf/ for information. (Details - 1: Could not send message to gconf daemon: Message did not receive a reply (timeout by message bus))}
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
