Ubuntu :: SAP Printing From 10.10 Client?
Apr 23, 2011
We have a SAP SERVER running on Windows 2003 64 Bit Server We created a client system on a desktop machine in Ubuntu 10.10. This system has got SAP GUI for Java 7.20 Rev 5 The printer is a network printer Canon IR 3300. I have created an output device using SPAD with the following field values
Output device : CANONIR3300
Short nane : CA33
Device type : POST2
[code]...
Problem is when I print any document from this terminal using this output device, the printer prints a garbage page. scan attached of the print.
PS: Other windows xp terminals are printing perfectly using:
Output device : LP01
Short nane : LP01
Device type : SWIN
[code]....
View 1 Replies
ADVERTISEMENT
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
Mar 14, 2009
Apologies if this was asked before -- I have googled the last bytes out of my Firefox but fail to find anything helpful. Here's my problem:I have a foomatic hpijs cups-driver for a HP Inkjet (Non-PS printer) installed. Printing from UNIX-hosts works. I have cups configured not to allow raw-printing (/etc/cups/mime.types: #application/octet-stream, /etc/cups/mime.convs: #application/octet-stream).I have now installed samba-printing, the cups PS-drivers plus the Windows PS-drivers are populated to /etc/samba/drivers/W32X86/ and get pushed to the WIN-Client.Problem is that when I print from a WINXP client, the printer outputs heaps of Postscript-text instead of my page.I have tried to debug this a bit but fail to find anything really useful. My observations so far:
- The samba-pushed HP_Photosmart_3300.ppd (in both /etc/samba/drivers/... and in the resulting dir on the WINXP client) reads:
*cupsFilter: "application/vnd.cups-postscript 0 foomatic-rip"
[code]....
View 2 Replies
View Related
May 31, 2010
I expected more from ubuntu 10.4 with regards to printing with exact size photos and with poor auto colour printing but the situation remains unchanged! for instance .. the photo size configurations for ubuntu/fspot/gimp and others are not compatible with my printers (HP and Brother) .. here in Europe a typical standard size photo (10x15inches or 150x100mm are not even on the Ubuntu listing? I have tried all listed possibilities including "custom" (which does not seem to ever work correctly?)and the result at best is photos with uneven boarders or at worse my printer goes a bit crazy with much wasted photo paper and expensive ink ...even photos selected for "no boarders" still produces photos with the self same uneven boarders.
I have tried pretty much everything over time following advice in this forum and including using HPlip and updating drivers required for my Brother printer but the root problem seemingly lies with the Ubunto photo size setup listing. Working with Ubuntu over the years I have found that it can do pretty much everything that Windows can do except for this dam ongoing photo quality and configuration problem.
View 9 Replies
View Related
Jul 28, 2010
We developed qt based application in linux. I wish to stop ejecting the paper after printing over.How to do it.
View 2 Replies
View Related
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
Jan 6, 2011
trying to create a "local network" by directly connecting an IBM Thinkpad with Debian Linux installed on it to an Alix computer running Voyager Linux. I'm following a "how to" I found to create a music server, hence the requirement. My issue is I can't get a static IP address to be configured on the Debian machine.I've trawled the net and have found the instructions about editing the /etc/network/interfaces and have tried to do this. First I tried to get DHCP working so I could connect the Debian machine to the net and this proved successful. I edited the interfaces file to look as follows:
# The loopback network interface
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
Then I tried adding a static IP address to the machine. As this is a network purely between two machines I made up the IP addres and used 192.168.0.1 and used a NetMask calculator to give me a NetMask of 255.255.255.254 (I told the calculator there would be 2 machines on the network). I then edited the interfaces file as follows:
# The loopback network interface
auto lo
iface lo inet loopback
[code]....
I re-booted the machine (ifdown eth0 followed by ifup eth0 keeps saying that eth0 hasn't been configured - a problem there that I don't understand), but during boot up time it failed to assign the Static IP address to eth0 and made me go into SU mode. To fix it I simply replaced the interface file with the static IP inputs with the file that had the DHCP entries (I'd made a copy of the DHCP file), and re-started the machine. Everthing came up fine. So the first question is how do I get a static IP address to be assigned to eth0 such that whenever I shut down and restart the machine the static IP address is always loaded?
The second question is around creating the network via the cross over cable. From what I've found via Google, all I should have to do is create a static IP address on the Debian machine and a static IP address on the Voyager machine. Once they're connected by the cross over cable they should see each other. Is that correct, or do I have to do anything else?
View 2 Replies
View Related
Mar 9, 2011
I am writing a TCP server in C, and the server listens to incoming client connections and accepts them. It then creates a thread to handle the client. The clients are expected to only receive data from my server and not send any data. So if I use a select() call with a recv(), I believe that the recv() will just block forever since there will not be any data coming from the client. If I use a non-blocking recv(), then this will just return a 0 which tells me nothing because the client is not expected to send any data. I am not sure if I have misunderstood some socket concepts, but I need a solution to detect when the client has disconnected so that I can close the socket and stop sending data to the client. As I understand it, simple ACKs etc are not captured by the recv(), and only data sent by the client will cause recv() to return a non-zero value, so I am not sure how to know when the client has disconnected.
View 7 Replies
View Related
Nov 25, 2009
Is there a good terminal services client available I can connect to my Windows boxes from Fedora12? I am willing to pay for a commercial license if there is a good one
View 7 Replies
View Related
May 20, 2009
I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface
View 2 Replies
View Related
Jun 11, 2011
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
View 6 Replies
View Related
Mar 15, 2011
I have a label printer connected to a windows machine and its shared. And other windows machines can print to this label printer. But I need to be able to print to it from the linux box using lp or lpr. I have been following this article on how to get the labels printing, but I am unable to have any luck whatsoever.
Here is where I am at:
bennett@ezyvet:~$ smbclient -L AECRECEPTION -U administrator
Enter administrator's password:
Domain=[VSG] OS=[Windows 7 Professional 7600] Server=[Windows 7 Professional 6.1] .....
I also have done this:
bennett@ezyvet:~$ sudo lpadmin -p AECLABEL -h 192.168.58.116 -i smb://AECRECEPTION/AECLABEL -P /home/bennett/drivers/zebra2844/zebra4.ppd
lpadmin: Unable to connect to server: Connection refused
The firewall on the windows machine has turned off. I can see 2 printers, cups cant find any more printers. It just says its searching for eternity. I believe the only reason why the 2 printers show up in cups is because they are network printers?
View 2 Replies
View Related
Apr 24, 2011
I have a headless server running Lucid (10.4.2) connected to that printer is an HP 930C. I have cups running and am able to initiate print jobs over the network from my desktop workstations.
Wat I haven't figured out is how to print a textfile directly from the CLI Console.
I have an entry /dev/lp0 My printers name is HP_DeskJet_930C
View 1 Replies
View Related
May 2, 2010
I was running Ubuntu Karmic Koala in a Dell Optiplex 8200. I wasn't having any problems, but it was running a bit slow. To fix this, I loaded a new graphics card and loaded Lubuntu so I could use LXDE. LXDE worked fine, but the associations on PC Manager were broken, so I switched back to Gnome. Ever since then, I've had a few problems.
1) The desktop image is black and all the icons that should be there are gone. If I browse to the Desktop via terminal (or Nautilus) everything is still there. If I view the desktop setting via the desktop setting control, it's set there, too. However, when I shut down/log out, I briefly see the desktop I set, before all goes black.
2) Printing is now VERY slow. It takes about minutes per page. I assume there's some file I have to either edit or delete to restore the desktop appearance, but I can't imagine why printing is so off.
PS - I was going to add tags, but I can't seem to type any in - weird.
View 1 Replies
View Related
May 31, 2010
I installed an hp 1300 AIO printer on Ubuntu 8.10. The printer copies fine, so I know that it has ink. However, whenever I print the printer will look like it is printing but will not actually put any ink on the page. Is there anything I can do to fix this? I ran sudo hp-check -r and these errors came up---
Checking PyQt version...
error: NOT FOUND OR FAILED TO LOAD!
Checking SIP version...
[code]....
View 5 Replies
View Related
Sep 9, 2010
I am running Ubuntu 10.4 LTS . I wish to share files and a printer over my network, it is on my main computer running XP . my ubuntu can see the printer but it will not print at all, it has the drivers Etc but it will not print. the personal file share said that i do not have the right package installed, but not which one!
View 6 Replies
View Related
Oct 26, 2010
I have recently upgraded to Maverick, but I no more manage to print PDF files, neither with Okular nor with Adobe Reader for Linux. The only way I have is to directly use lpr, but it's long work. My printer is an hp deskjet 5150.
View 9 Replies
View Related
Aug 11, 2011
I am hopping to get some help with a printing application problem. When I go to System>Administration>Printing, I get nothing. I have found several possible solutions, but these did not work for me.
First, from Ubuntu Bugs, following the [URL]... But Bug 210738, file 04/02/2008, doesn't fix my issue. I did getting the following results by running 'system-config-printer' in a terminal:
tim@dell-desktop:~$ system-config-printer
Traceback (most recent call last):
File "/usr/share/system-config-printer/system-config-printer.py", line 104, in <module>
[Code]....
but this did not fix it either, At this point I ought to mention that I can print to my existing printers, but I wanted to add a new printer. I have no idea when this problem occurred, maybe when I upgraded from Ubuntu 8.4 LTS (Hardy Heron) to Ubuntu 10.4 LTS, but I can't be sure. To add the printer I followed this link {URL]... and was able to add the new printer.
But, after all is said and done, I think the GUI should just work, especially if we want Ubuntu to be more ubiquitous on the desktop.
View 1 Replies
View Related
Jan 6, 2010
I have a very weird printing problem, and don't really know where to look at to solve it.For some apps,printing works great (openoffice, acroread, kpdf, kghostview, Kolourpaint). For some others, the app just freezes when I click on "print" (gimp, firefox, "document reader", "image reader"). Maybe this is not the correct forum to ask this question, but I don't really see which one would be the best.
[Code]...
View 2 Replies
View Related
Jan 7, 2010
When I try to print in Openoffice, whether it be buy the File menu, or the print icon, or the keyboad shortcut control-p, it always freezes and I have to force quit. This is very annoying; what can I do?
View 3 Replies
View Related
Jan 9, 2010
I updated to the recent 9.10 version of Ubuntu and found that my printer no longer works. When trying to print, the printer just blinks and *occasionally* makes a noise and prints out a partial line of text or whatever. It's a USB connecting HP Deskjet D1420 that is not a network printer and does not need to be networked.
[Code]...
View 6 Replies
View Related
Jan 22, 2010
I looked around to see if anyone has ever asked this before, but without success. Obviously I've been using Ubuntu's integrated Print-to-File/PDF solution, (which compared to other OS's is pretty well implemented), but is there any place where I could control the output more deeply, for configuring level and type of compression, font embedding, securiy/encryption, etc, or am I asking for too much and should install 3rd party software?
View 1 Replies
View Related
Feb 23, 2010
I managed to install a networked printer to my box by
apt-get install system-config-printer-common system-config-printer-gnome
And using the system-config-printer, I can send print test page and it works.
Now, I noticed that I don't have lpr installed on this box.
So even if I install lpr or lprng I cannot seem to make it work.
Ohh and by the way, the only thing I use to print from that box is Acrobat Reader 9.. it is proprelly installed. I can see the networked printer entry from the program.. but for some reason Acrobat Reader 9 needs to use lpr to send the print job.
I wish to know what I am missing here.
I can do lpstat -v and I see my printer entry from there.
Now: the question: how can I setup lpr to work with my networked printer?
Should I install lpr or lprng?
What is the proper way to install a networked printer under Ubuntu-server?
View 2 Replies
View Related
Feb 27, 2010
I am using Ubuntu 9.10. I have a Brother MFC 240C printer. I installed the print driver from here. Driver installed with no problem. When I print something, it goes through the print que to the the printer with no error messages, however the printer never prints the document. When I take the printer off line, Ubuntu senses it's offline and when I return the printer online Ubuntu knows it's back online. So I know Ubuntu is talking to the printer. It's just the print jobs never print. I am dual booting with Windows XP. The printer works fine when in XP.
View 9 Replies
View Related
Mar 12, 2010
Anyway im trying to do a simple thing pointed out in the thread title. Everything is set up, cups-pdf works, in dosemu.conf lpt1 command is "lpr" printer-timeout is 10... I "work" in an accounting agency that has a program written in clipper back in 1992. Apparently some prints from this program produce text/plain and some produce application/octet-stream. text/plain is printed. The later is always aborted. I have uncommented the lines in mime.types and mime.convs. Which are located in /usr/share/cups/mime.
View 2 Replies
View Related
Apr 1, 2010
The update manager recently installed a new version of CUPS on my 9.10.
Now when I print a simple Open Office document it comes out in magenta instead of black. Same applies to printing from gedit.
View 4 Replies
View Related
Apr 6, 2010
My printer had been working for a long time until today. I went to reinstall the driver once I found out that my printer had stopped working but it wont work because it says I need at least CUPS 1.2, but I have CUPS 1.4 something so something must be wrong there. This is the log report that I got after troubleshooting.
Page 1 (Scheduler not running?):
{'cups_connection_failure': False}
Page 2 (Is local server publishing?):
{'local_server_exporting_printers': False}
[Code]....
View 4 Replies
View Related
Apr 9, 2010
I have a shell script set up to print a test page on a couple of my rarely-used large format printers. These are expensive boys, and if they are left unused for too long, their cartridges dry up. So once a week, cron runs the script and everyone is happy. Except I'd like to change the print resolution for one of the printers. lpr does not seem to have an option to send a command to the printer for setting resolution. Is there another command that I could use under Ubuntu within Linux to do what lpr does, but also offers the setting of print resolution?
View 1 Replies
View Related
Apr 24, 2010
I have a weird printing issue with OpenOffice.
When I print from OpenOffice Writer, some characters are replaced by random characters. For example, this morning all capital "I"'s were replaced by "�" (German special character), a "J" was replaced by "t", and so on. But not all characters are replaced, most are correct.
In addition, the top of the documents are cut off, as if there is an overly wide top margin where the printer cannot print.
I exported the document to PDF and printed from Acrobat Reader, and everything was fine. No problems!
I'm running the Lucid release candidate (but the problem has bugged me for a while now), with a Brother HL2030 printer.
View 2 Replies
View Related
May 5, 2010
When I try to print any PDF from either Acroread or Evince, it doesn't print and the queue tells me the printer isn't connected; and yet, when I print from OpenOffice.org, everything's fine.
View 3 Replies
View Related
