Ubuntu :: Router Siemens Gigaset SE568 And Skype?
Jun 1, 2011How can work skype with this router?
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Automatic Backup Using USB-HD Connected To Router (Siemens SE551)
Aug 6, 2010Currently, I would like to setup an automatic backup system, where the data on my computer is copied to an external harddisk which is connected to the router (Siemens SE551). This device theoretically allows setting up a file server, but unfortunately I can't access the share from Linux. I have not yet tried to access this share from Windows.
The rough plan is to use rsync and ssh, issued by a cronjob on both, my Ubuntu- and on my WinXP-notebook. But before considering this, I have to get my system connected with this drive.
BTW: I am using Ubuntu 10.4.
According to the SE551 manual [URL], NAS is not provided.
I followed this manual and set security OFF. According to the router's web interface, the device was recognized correctly.
I installed samba:
Code:
gedit /etc/samba/smb.conf
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code]....
Ubuntu :: Router Rebooted When Login To Skype?
May 29, 2011How can I solve this problem??? my router is Siemens Gigaset SE5678
View 4 Replies View RelatedUbuntu :: Transfer Contacts From Siemens CX75 To System?
Jun 10, 2010I can't transfer contacts from Siemens CX75 to Ubuntu over bluetooth.
I've managed to launch XMPM 1.3, but it doesn't detect my phone. Haven't found any other versions of XMPM,
Wammu doesn't detect my phone automatically and I have problems setting it up manually.
Can't launch GSMxx at all
And I don't really know how to set up KMobileTools . What devices should be entered when I connect my phone via Bluetooth?
Ubuntu Servers :: Installing 10.4 64bit On Fujitsu Siemens X300 S2?
Jul 16, 2010i am trying to install ubuntu server 10.4 on a fujitsu siemens x300 s2, but when it comes to dectcting the hard disk it cant find them. it says i have to load the scsi drivers. i have gone threw the list that appears on the list but none work.
View 2 Replies View RelatedUbuntu Installation :: 10.04 On Fujitsu Siemens Lifebook T3010 Failed - Blank Screen
Jul 15, 2010I haveI tried to install Ubuntu 10.04 to my Lifebook T3010 and failed. The last step was ubuntu splash and after that just blank screen.
View 3 Replies View RelatedDebian Installation :: Squeeze Does Not Run On Fujitsu Siemens ST4121 Tablet PC
Apr 25, 2011I try to install Debian Squeeze on that tablet PC. Lenny was running fine (even reinstall of Lenny works). The installation seems to run fine, too. The problem shows up after the first reboot of the system. After the first messages are displayed, the screen gets black and develops some vertical white lines that keep getting larger until they fill the complete screen. When I configure the BIOS for a second monitor, the external monitor works, I can log in. But this is at best a diagnosis option, not a solution. Ubuntu shows the same symptoms, btw. Here is the output of lspci:
00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04)
00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
[Code]....
Fedora Hardware :: Fujitsu Siemens Monitor - Can't Change Resolution Which Is Stopped At 640x480
Jan 23, 2010I have a fujitsu siemens monitor C776 (built by Hansol E17CL)
FC12 can't autodetect it
If I go system -> preferences -> display the button: detect monitor does not work
I can't change resolution which is stopped at 640x480:
Ubuntu Multimedia :: 3 Versions Of Skype On The Skype Download Section ?
Jan 3, 2010There are 3 versions of Skype for Ubuntu on the Skype download section. Does anybody know which is the correct one for Ubuntu Karmic?
View 5 Replies View RelatedUbuntu Installation :: Where Is The Skype Icon Of The Running Skype Instance
Apr 30, 2011Since there is no notification area any more in 11.04, where is the skype icon of the running skype instance?
View 2 Replies View RelatedUbuntu :: Bluetooth And Skype \ Make A Call Using These Headphones With Skype, Can Speak For Say 10 Seconds And Then The Headset Disconnects Completely From The System?
Aug 12, 2010I recently bought a IOgear USB bluetooth adapter and a Sony DRBT101/BLK bluetooth headphones to use with my computer.Whenever I try to make a call using these headphones with skype, I can speak for say 10 seconds and then the headset disconnects completely from the system. I then have to reconnect the headset by switching it off and on. I do not have this problem listening to music using A2DP. It works fine with my mobile phone.When I change the profile to Telephony Duplex (HSP/HFP), it shows up as hands free, I thought it should be headset in blueman manager. My friend uses Plantronics headset with is Dell laptop with built in bluetooth and he says his comes up as headset not hands free. Could this be causing the problem?
View 1 Replies View RelatedCentOS 5 :: Errors: Skype: /usr/lib/libstdc++.so.6: Version `GLIBCXX_3.4.9' Not Found (required By Skype)
Apr 12, 2011hJust installed brand new Centos 5.6 and skype, according to centos wiki (http://wiki.centos.org/HowTos/Skype) Getting these errors: skype: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.9' not found (required by skype)
[root@thinkpad opt]# rpm -q libstdc++ --provides
libstdc++ = 4.1.1-52.el5
libstdc++.so.6()(64bit)
libstdc++.so.6(CXXABI_1.3)(64bit)
libstdc++.so.6(CXXABI_1.3.1)(64bit)
[Code]...
Software :: Can't Install Skype On CentOS 5 - Bash: Skype: Command Not Found
Oct 23, 2010I've read and execute the info write in this guide :
[URL]
When I type skype , I receive this message :
bash: skype: command not found.
Fedora X86/64bit :: Get Skype To Work On Skype On X_86 64 Bit 14
Jan 11, 2011get Skype to work on 64 bit have downloaded and installed the 32 bit which installed fine but just wont load
View 2 Replies View RelatedGeneral :: Skype Alternative Similar To Windows Skype?
Apr 21, 2010Does anybody know a good option for a Skype based solution that works on Linux? I have a real problem with the current Linux version as it is a crappy, buggy and downgraded version of the Windows equivalent.
View 7 Replies View RelatedHardware :: Skype And A 3g Modem Dongle / Cant Text Via Skype?
Jun 9, 2011I just recently purchased a 3g dongle for my netbook. Everything seems to be working fine until I discovered this strange problem. I cant seem to text via skype, it doesnt go through. I testet the skype test call service and voice works fine, audio and mic. I have tried to google and search forums but no luck. I have before used skype on my netbook with my cellphone as a hot spot and it worked without problem but it doesnt have the same provider - different sim cards in phone and dongle.
View 2 Replies View RelatedUbuntu Networking :: DLink ADSL Router As Main Router And The Belkin N1 As Repeater?
Apr 13, 2010Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedNetworking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?
Jun 18, 2011I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
Networking :: Set Up A Laptop As A Router To Connect Wirelessly To ADSL Router?
Nov 6, 2009I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
Networking :: Network Setup - Router - Wireless Router Card ?
Apr 24, 2010I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
General :: Laptop As Router Between Wireless Router And Windows 7 Box
Aug 7, 2010I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies View RelatedNetworking :: Linux As A Router / Bring 147 & 148 IP Online Without Router?
Mar 26, 2009These r IP provided by my ISP that i've put on Fedora 8:
WAN IP:xxx.xxx.xxx.17 (eth0)
Subnet:255.255.255.252
Gateway:xxx.xxx.xxx.18
Valid static(public) IP set of 2:
IP:xxx.xxx.xxx.147 & 148 (eth1, eth2)
Subnet:255.255.255.240
i want to run xxx.xxx.xxx.147 as a web server & xxx.xxx.xxx.148 as a ftp server. but I'm able to ping only xxx.xxx.xxx.17(WAN IP) from outside world. Can any1 tell me that how can i bring my 147 & 148 IP online without router.
Fedora :: Getting Skype To Work On 14 - No "yum Install Skype---" Command
Dec 15, 2010I have downloaded & installed the skype beta release for linux (now ancient?) on my newly build fedora 14 (64) box.
Under fedora 12, I made this work after several hours of mucking around by installing old libraries for 32 bit code in /lib and /usr/lib - as I got an error, I found the library and put it in place. This was painful and the WRONG way to do things - I should have been using yum!
It remains a shame that the Skype release for Linux is so old, but that is life.
Can anyone list the libraries needed (prefer yum names if possible) to make this work?
I can do this again the hard way and list the results for others (should have saved for myself, but I never dreamed that a newer Skype release would take so long) , but I am sure many folks have this working already. I am surprised there is no "yum install skype---" command.
Ubuntu :: Difference Between A $29.95 Router And A $109.95 Router?
Dec 12, 2010I was just wondering if there is there is any difference between a $29.95 router and a $109.95 router. Like is a more expensive router more apt to transfer data to my laptop quicker.
View 9 Replies View RelatedNetworking :: Old Router Behind New Router - Configuration ?
Oct 30, 2010I've moved a linuxbox from being my gateway (nat, etc) to behind a new gateway (a DD-wrt router). For transparency purposes, I'd like to continue using the old box services, and just have the gateway in front of it.
Here's what I did:
The newgateway is setup for class C, 192.168.0.0
This configuration works, but sometimes it doesn't and I haven't figured out why yet.
At sometimes, clients on the LAN get throughput rates with very little speed loss (using speakeasy speed test). They will run at 33M on the LAN, running through both the newgateway, and the oldbox, and get about 35M with directly connected to the cable modem.
Other times, it seems nothing can talk with anyone, and I am not sure why.
I know what I have done is a little unconventional, but it's a transitional thing, and I am not sure it is the cause of the problem, although it was the last things changed.
Ubuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?
Aug 1, 2010My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedNetworking :: Linux Router / Configure Linux CentOS 5 As A Router Using Iptable?
Nov 27, 2009I want to configure linux CentOS 5 as a router using iptable, .Im new in linux so I need the steps to do that
View 5 Replies View RelatedNetworking :: Cannot Ping Wireless Router Or Access Router Settings - Wireless ?
Jun 9, 2010I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
Networking :: Network Configuration: Server - Router Vs Router-server
Aug 14, 2010I am thinking of moving the router behind a server and connecting the server directly to the internet via a modem. Are there any security issues related to doing this? or other things I should be aware of. Iptables are implemented on the server blocking access on unused ports.
View 2 Replies View RelatedNetworking :: Get The Wireless Router To Connect To The Other Wireless Router?
Feb 16, 2009This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
