Rhythmbox 0.13.1 on Ubuntu 10.10. So far, I tested my favourite plugin "jess plugin" and the standard plugin "goom", it appears on both. After the visualisation freezes, it isn't possible to start it again unless rhythmbox is restarted. (But the rest of the program keeps on working at least.) How to avoid that? It doesn't happen in totem... (But I want to use my rhythmbox library).
View 1 RepliesWhenever I plug my Zune in, Rhythmbox recognizes all the songs on it but when I doubleclick on a song to play it, the song doesn't play and Rhythmbox quits. Any suggestions on how to fix it? I'm running a Dell XPS 410 with 4GB RAM and a 1.75 GHz processor.Also, I imported a CD and it plays fine.
View 1 Replies View Relatedim using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies View RelatedI used to open Rhythmbox and click on the playlist. Then I typed a song's name and the chosen song would appear highlighted on the playlist.
However, since I upgraded to Maverick when I repeat that same procedure Rhythmbox will search for an artist containing whatever I typed instead of a song's title containing it.
I want the old feature back. I don't know if I'm being clear...
Using Rhythmbox 0.12.8 in Unbuntu 10.04, if you want to disable the pop up song notification every time it starts a new song, go to:
Edit -> Plugins
and un-check the "Status Icon" plugin.
I just moved all my songs over to my samba share server. I've been meaning to do it for a while and I finally did. Before that I had all my songs locally and if I needed to delete something I didn't want I could do it straight from Rhythmbox as I was listening to it (instead of tediously going through a file browser and manually deleting it).
However, now that I've put everything on to the samba share (which I've mapped to /home/chris/Music in my fstab as CIFS) I cannot delete anything from Rhythmbox. I get an "Operation not supported by backend" error. However, I can delete, copy, paste, create and do anything else fine in nuatilus, windows explorer or a terminal from any computer.
Why would I be getting this error? I'm 99.9% sure it's not a samba issue. Is it possible that Rhythmbox cannot handle remote shares except reading from them? The only workaround I can think of is to keep files both locally and on the samba share and to also create a two way sync between the two root "Music" folders. Anything updated or deleted on either end would be populated across the other. But my point here is that I shouldn't have to. I would like to just keep it simple, plus the point of having the samba share is to free up space on my local end as well as making all the songs available over the network.
I had Ubuntu 10 do this same thing for me. I'm using Natty now, and it worked fine until a few days ago, then out of nowhere it does this. I'm listening to a song and it plays all the way through, but when its done it doesnt play the next song. I can select a new song but when I do, it freezes. i'm using an HPG71 if that helps.
View 2 Replies View RelatedI've got Rhythmbox set to automatically draw songs from two folders. Everytime I start the program up, it builds the library fresh from the folders, so any changes I've made to track numbers, song titles, artists, etc is not retained from the previous section. Is there a way to permanently change this time of info in Rhythmbox, or is the another decent Linux music player that has this capability? Btw, I have Gnome.
View 4 Replies View RelatedUpgraded to 10.04, fresh install. Now I can't change to a new song or go back to the previous one by using the mouse wheel over the rhythmbox icon in the task bar like I could in the previous release. I couldn't find an option for it in the plugins or preferences neither. Is there a way to get this back?
View 6 Replies View RelatedWhen I am playing music from my iphone through rhythmbox the iphone syncs at the beginning of every song. I dont know why it would need to do that? I have taken a look at settings and nothing really related.
View 3 Replies View RelatedWhen right clicking a song in Rhythmbox and selecting properties I should be able to change the name of the album for example. However I am able to select the content of the field I am not able to alter it.
View 1 Replies View RelatedI like the Visual Effects tab feature. I noticed that is gone from Ubuntu 11.04 and subsequently from distros based on it such as Linux Mint 11.The image attached is of Ubuntu 10.10. How would I get the None and Normal effect settings in Ubuntu 11.04Linux Mint 11?
View 5 Replies View RelatedBoth Banshee and Rhythmbox crash, leaving a segmentation fault in the terminal, after playing a song for less than a second. I do manage to get some sound before they crash. This problem seems to have begun only a couple of days ago after doing an update. Unfortunately I was playing playing around with moving my music collection to an NFS share around the same time as the update so I can't be sure which action it was that broke music playback.
Because both Banshee and Rhythymbox are affected and showing identical behaviour I think the problem is gstreamer. Reinstalling everything I could find in synaptic related to gstreamer had no effect.
Some general information:
- My music collection is in FLAC but other formats seem to cause the same behaviour.
- Music from an NFS share or my external USB drive causes the same behaviour
- VLC plays music from my NFS share without any problems
- Removing ubuntu-one (as suggested in some posts) did not help
- I'm using Ubuntu Desktop 10.10 x86
I've had no luck searching the interwebs for help thus far. Does anyone have any ideas?
I am having a bad slowdown issue when I enable Visual Effects with the Ati proprietary drivers that come with the installation. Everything runs very slow maximizing and minimizing take about 3-5 seconds per click and the effects get all choppy and don't look right like they did on my x1950 video card. I have tried downloading the current drivers from the ATI site but they don't seem to be initialising correctly after I perform the install.
I also know that the graphics card is not the culprit as it works perfectly fine on my Windows 7 64 bit install. There is no reason that my video card cannot handle the Visual Effects as it is a 1GB 4890 should have more than enough horsepower.
My machine is:
AMD Phenom II 965 Black Edition
8 GB G. Skill 1600 DDR3 Memory
1 TB Western Digital Caviar hard drive
1 GB 4890 Graphics Card ATI.
I have acer 5738 laptop running on ubuntu 9.10...my problem is the visual effects are not being enabled.
View 1 Replies View RelatedJust installed an ATI Radeon 9500 Pro graphics card (128 Meg). Linux just seemed to work fine with it - I didn't need to install any extra drivers or anything.
Before, when I was using onboard graphics, if I tried to choose "normal" or "extra" visual effects, it told me that I didn't have sufficient hardware. Now, since installing the card, it first said "installing drivers" then a message came up saying "do you want to keep these settings .... respond in 30 secs etc...
I chose yes to keep settings but when I close "Appearance preferences" it does not retain my settings and no visual effects are activated. If I open up Visual effects again the check box next to "none" is ticked.
I looked around and there seem to be drivers available direct from ATI but are these newer than those available already on Ubuntu 9.10? It is very confusing. It seems that I have might have to uninstall existing drivers before I can install new ones and I am reluctant to do that because - at the moment, apart from visual effects, everything works And would doing this even help anyway?
In fact has anyone succeeded in getting a Radeon 9000 series card to show visual effects in Ubuntu 9.10 or should I stop wasting time and assume that it is not up to the job? I can live without visual effects (although it would be nice)
I have 1 GB ram,256 MB graphics. I installed ubuntu 10.04. first I was able to change visual effects. Now I am not able to do that.
View 1 Replies View RelatedMy Acer laptop Travelmate 290 was fine till yesterday (ie) before full update.No Error.I have the recent Ubuntu. Later When I boot I can't find my cursor but I could randomly see pop up notification of Application----Places--- System could be read.When I open any folder its fixed to top of the screen and no button for minimise,max and close.When I dig thro all the forums and solved by reinstalling metacity and change the setting of Appearance-Visual Effects to Normal.When I set to Normal it scans for the driver and asking me to confirm the setting.Once confirmed all the above problems solved but it don't reatain it,it is jump back to none. I need to do this on every boot.Is any way to avoid this? Is anyway to clean all the compiz files and setting from the PC?I vaguely remember it may be because of uninstall of compiz.
View 2 Replies View Relatedthere I turned on my Visual Effects to Extra or Normal and when I do that both the top and bottom taskbar goes away. The only way I can get them back is to turn visual effects off. Does anyone know how I can fix this issue?
View 2 Replies View RelatedCan't turn Visual effects?
View 4 Replies View RelatedI just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
Where can i change visual effects in 11.04. In previous versions i could do it under apperances?
View 7 Replies View RelatedI'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
View 9 Replies View RelatedProblem with the Visual Effects under Appearance is grayed out. The options were available until after removing Compiz. Is there a way to restore back to the original setting of ubuntu 10.10 prior to installing Compiz?
View 9 Replies View RelatedA few hours ago I upgraded my system, from Karmic to Lucid and I'm glad with it.But I have a problem, (two actually, I posted the second in other thread), Gnome is not remembering my Visual Effects configuration. I mean, I select the "extra" option and when reboot, it's back to "none".It will be a pain having to edit this every time my laptop starts.
View 2 Replies View Relatedi have ubuntu 10.04 installed on my pc but when i try to open visual effects on as normal or extra my pc stoped and must restart my pc manually same problem when enter on live cd same problem with 9.10 only but when try kubuntu 9.10 work normal
View 8 Replies View RelatedI have recently updated to Ubuntu 10.04 (version of Gnome Desktop environment: 2.30.0, version of Linux kernel: 2.6.32-21-generic).My problem is that when I try to enable "Visual Effects", I receive an error message: "Desktop effects cannot be enabled". When I attempt to enable Visual Effects, my system starts searching for external device drivers but finds none. I don't believe that the source of the problem should lie in my graphics card (I have a DELL Inspiron 1545 notebook with an Intel Graphics Media Accelerator 4500MHD graphics with up to 1750 MB of dynamically shared memory allocated by the system). With the earlier version of Ubuntu, the 9.10, I didn't have this problem.
View 2 Replies View RelatedI am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
View 1 Replies View RelatedThe hardware devices drivers list three different types of drivers onboard including what appears to be the latest one with accelerated graphics capability. When I try to improve the visual effects to 'extra' it keeps telling me there's an error. I've tried improving the effects with all three but still getting the error.
View 6 Replies View RelatedI recently install Ubuntu 10.04 on my computer and enabled the top effects option when choosing desktop background, screensavers etc. It worked fine for a couple of days then started to take about 3-5 seconds up maximize any program it ran - it minizes them instantly but takes ages the opposite way around.
My laptop has a core duo processor, 3gb of RAM, a ATI 3400 512mb graphics card, when I ran Vista on it, it could easily handle Vista built in effects and run Crysis well on low settings - I very much doubt the problem is that my computer isnt powerful enough. Is there anyway I can get Ubuntu's special effects to work properly again? Atm normal effects wont work either - I am having to use the No Effects option.