I had windows 7 installed in my 4th drive and windows vista as my boot drive. I formatted my windows 7 drive using vista and installed ubuntu 10.04 in its place. But still, when i update grub it shows windows 7 as one of the operating systems and my vista OS has been renamed as Windows 7. Please help. How can I remove windows 7 from the list, while i update grub.
View 3 Replies
I want to Re install windows 7, but when i do so it removes GRUB making me unable to boot into Ubuntu. Is there any way in which i can install Windows without removing GRUB?
View 6 Replies View RelatedI have Karmic installed, but still using old grub from Jaunty. I decided to get rid of my Vista dual boot so I used gparted, deleted the partitions and moved and enlarged my Ubuntu ones. Grub then didn't work, presumably because I deleted the MBR. I then installed Opensuse 11.2, which I assume still uses old grub too. This gave an Opensuse option which worked, and a Karmic option which took me to the Karmic bootloader, but Karmic did not load. I then tried some instructions to repair grub using the Ubuntu installer, installing grub to my extended partition. This tells me there is no operating system found. I then tried following the instructions at [URL].
My fdisk -l looks like:
dev/sda4 * Extended partition
dev/sda5 Ubuntu /
dev/sda6 Ubuntu /home
[Code].....
I currently dual boot and wish to know how to remove the Windows partition/drive while still allowing Ubuntu 9.04 to load safely as my main OS. I know how to restore windows partition by;
If MBR gets damaged boot from MS Windows Xp disc, Select "R" for "recovery console", select main windows installation drive (admin password usually nothing, just press enter) and type "FIXMBR" this will allow you to boot windows again, but Ubuntu partition will be unbootable and require installing ubuntu again to dual boot.
But this leaves Ubuntu partition Un-bootable as it removes the grub menu, how would I do the same for Ubuntu and make window partition un-bootable so I can remove it?
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies View RelatedI have a acer aspire one netbook which was duel booted with the latest version of Ubuntu but as i've stopped using the netbook as much and my family use it more, i removed ubuntu for them. But i just deleted the partion and now i am stuck with the grub luncher when i boot up saying Grub Rescue, partion not found, i can only boot via USB as its a netbook!
View 3 Replies View RelatedI am thinking the GRUB 2 more functionality was achieved at the price of presenting a user with what I experience as Byzantian mangle of default loaded templates, almost designed to make me give up and leave the defaults.menu.lst is no more - its now /boot/grub/grub.cfg DON'T edit it! /etc/grub.d has the new stuff. These are not just a list of boot-up choices anymore. It requires one to be a programmer.One called 20_memtest86+ is not really to be meddled with. I tried simply making it non-executable.The last choice, 40_custom, allows to add entries only - not quite what we wanted to do.
View 9 Replies View RelatedI've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
Since I've been using Ubuntu, I've noticed that new entries for Ubuntu (the same but with the final number changed) occasionally appear in the Grub 2 boot loader. I'm talking about the first two entries in this picture, compared with the third and fourth entries here:Two questions:1. What are these entries? They appear to simply be the same OS but different versions. Are they generated when Ubuntu updates?
View 3 Replies View RelatedWhen i reinstalled Ubuntu i reinstall it on top of an existing not working ubuntu so now in the boot menu i still have 2.6.35-6-generic menu items but i can't find 2.6.35-6-generic anywhere how can i fix it?
View 4 Replies View RelatedUbuntu updated the Kernel but now i get the two versions (old an new one) in the Grub menu, how do i remove the old version.
View 7 Replies View RelatedBasically this is my problem:
1.) I want to remove Ubuntu and Grub and have only Windows XP on my PC again. (Remember the good old days?)
2.) I want to put the Ubuntu partitions back into Windows partition. I need the space.
3.) I can't use an XP disc because I don't have one. (No. Neither does anyone else I know.)
4.) FIXMBR isn't working... am I doing something wrong and what other options do I have?
5.) Does anyone know how do this without removing all my files on the XP? I can't afford to backup everything on my XP. I CAN'T!
I am using ubuntu 10.04 and I would like to keep only the main menu,and i have to disable all the other options including recovery and memtest in the GRUB menu..How to do this..?
View 9 Replies View Relatedmy computer screwed up and the MBR or GRUB was screwed up, so I got my Windows 7 repair disk and repaired the MBR. Then I needed grub back so I could boot into Ubuntu so I went and looked for something to just install grub and found this Auto Super GRUB Disk (ASGD) thing. So I installed it and then it appeared on the windows boot manager menu when I started up and I went into it and installed grub again. Then when I booted back into windows, it asked me if I wanted to remove ASGD and I clicked yes. Ever since, the ASGD entry has not been removed from my boot menu for some stupid reason. What happens is the computer starts and goes into GRUB which is what I want and then if I go into Windows 7, it will then come up with another menu asking whether to boot into Windows 7 or the ASGD, even though ASGD isn't there anymore. I can still boot into windows, but this extra menu that comes up every time is starting to **** me off. I've tried EasyBCD and the entry does not come up on there.
View 5 Replies View RelatedI have Ubuntu 10, Linux Mint 10, and Windows 7 installed on my machine. Every time there is a kernel update, grub adds the new operating system as a new item in the boot screen, but it does not remove the old variant. The result is that more an more choices appear as bootable, but most of them will never be used. Now, how, in grub V.2, does one remove old stanzas that one no longer needs? It seems to me that one merely has to go to the boot directory of the particular system one is in, remove the vmlinuz, etc. for the particular kernal version no longer needed, and then run grub update. This should give one a new cleaner screen on the next boot. Is this right?
View 2 Replies View RelatedHow do I remove old kernels from the Fedora grub menu? I have three currently and I want to keep only one old version to fall back if I have any problems with the current one. When I was using Ubuntu, I had Ubuntu Tweak which had an option to clean up old kernels from the grub menu .. is there something similar for Fedora?
I'm using Fedora 15 32-bit with Gnome 3.
I'm trying to uninstall backtrack 4 and put windows xp on my hard drive. I bought the hard drive clean and immediately put backtrack on it I've never dual booted with windows. I kept getting the no-apic timer error when I stuck in my windows xp boot disk and booted from the CD. I then used my live backtrack 4 disk and deleted the partition so I have a blank hard drive (so I thought). I tried booting from the windows recovery disk and I kept getting the GRUB error 22.
I went back onto the backtrack 4 live cd and created a partition on my hard drive, tried to boot to the windows recovery disk yet again and now I'm getting the GRUB error 15. I've been at this for about 2 hours now and haven't found an answer anywhere. I've tried going sudo grub then doing find/boot/grub/stage1 and I get the error 15 in there as well. All I want to do is install windows. All solutions I've seen say to do fixmbr in windows command line but the only disk I can boot to is backtrack 4 so that's not an option.
I have a flash drive that I used on my old netbook to temporally hold a copy of ubuntu as the netbooks internal drive was dead. I have since got a new netbook and wanted to return the flash drive to simple removable storage. I've re-partitioned it back to 14gb fat32 2gb ext2 and everything is working fine. Except that if I try to boot with the key inserted grub loads then errors imminently (sort of obvious if grub is still in the MBR but there is no menu.lst file anymore...) Googling for removal of GRUB just gives me loads of hits for how to restore windows mbrs when you dont want to keep linux anymore. None of these methods seem to have any targeting. I need to remove grub from sdb while keeping it intact in sda. sdb shouldn't even be bootable, so that when boot from usb is higher in the bios than boot from hdd the usb key is ignored and the hdd is booted as normal.
View 3 Replies View RelatedDoes anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies View Relatedi installed ubuntu 10.10 netbook edition and it installed fine, i updated everything on and now when it starts i have 2 versions of it to select from 2.6.35-22 and 2.6.35-24 as well as the recovery versions of it. how do i remover these options from the grub menu? in addition to this i also have a question about updating python on it, its running version 2.6.6 and i need 3.x. how do i upgrade it?
View 14 Replies View RelatedI have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View RelatedI tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies View RelatedI have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI have one laptop running on ubuntu and one computer running on ubuntu.....once i removed ubuntu from my laptop....and installed windows on my laptop but it didn't work as it should work. It used to crash too often. Then i removed windows and put ubuntu on my laptop.. but now i want to put a new hard disk in my computer....but now i want to run both windows and ubuntu.....i just want to ask that does ubuntu leave any strains on my hard disk when i remove it.....and is that the reason windows doesn't work properly
View 6 Replies View RelatedI have a problem booting ubuntu 9.10 after removing a disk drive that had windows 7 on it from my PC. Below is a run down of what happened.My system is MSI based MB with 3 IDE drives and DVD-writer on Primary and Secondary IDE channels.The MB also has a FASTTRACK SATA/IDE controller that I occasionally use to attach another disk for trial/backup purposes. (main backup is to external USB storage)For some time I have DUAL booted with grub2 with ubuntu 9.10 and windows XP all fine and no problems. Use ubuntu as its quick and easy on my old PC. XP for some legacy apps.As I had a spare IDE drive I thought I'd give a Windows 7 a trial. The Drive is attached to the FASTTRACK IDE controller and windows 7 installed with NO OTHER drives attached.
All OK so far!Reattached my other drives and could boot into ubuntu/XP as required. Ran sudo update-grub which found new windows 7 Ok! So for the last month I was happily play/using all 3 OS booting from grub2 loader as required.Windows 7 30 day trail has now expired so no longer of any use to me. So I decided to remove windows 7Here's what I did:..........1st: Just unplugged the disk drive with windows 7 on it! XP boots OK but ubuntu fails to boot! 2nd: Re-attached the windows 7 drive and wiped with ubuntu disk utilityRe-ran sudo update-grub windows 7 no-longer on grub2 menu! Reboot OK windows 7 no-longer on grub2 menu ubuntu and XP boot ok. Remove (empty)windows 7 drive again and ubuntu fails to boot
I've decided to get rid of ubuntu since I can't get my 5.1 system to work. So here is the drill :
*I have an Ubuntu installed
*I also have a flash and an iso image of windows XP
how do I remove Ubuntu and then install windows xp.I also want to divide my drive into C and D if possible .
when it comes to Linux with little to no understanding of the command lines and what they mean.
Issue:I currently have a dual boot Windows 7 PC (Toshiba Satellite A100-756 with 250GB HDD and 3GB RAM, 32-bit).What I want to do is format the HDD (removing both partitions) and make a clean install of Ubuntu only.I tried for several hours last night to achieve this using Ubuntu 10.10 and Pendrive, but with no success. System would not boot from USB stick.
How do I: 1. Format the HDD and remove the partitions using only Ubuntu on a USB stick?
2. Install Ubuntu and partition the HDD ready to copy over my backed up files?
So I made my netbook a dual-boot machine about 2 months ago - it came with windows 7 and I added ubuntu. I've been running Ubuntu on my desktop machine for a while, so I'm pretty comfortable.
Now I'd like to completely get rid of the windows partition on my netbook and make the whole thing ubuntu. However, I've downloaded and installed so many programs and packages and libraries that I don't want to have to do it again. Is there a way to remove the windows partition (basically expanding the ubuntu side) and keep my programs/settings/libraries/packages/etc on the linux side? Or do I have to erase the partitions and start over with a fresh install?
