i installed ubuntu 10.10 netbook edition and it installed fine, i updated everything on and now when it starts i have 2 versions of it to select from 2.6.35-22 and 2.6.35-24 as well as the recovery versions of it. how do i remover these options from the grub menu? in addition to this i also have a question about updating python on it, its running version 2.6.6 and i need 3.x. how do i upgrade it?
View 14 Replies
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies View RelatedWhen i right click a file and give open with,i can find lot of duplicate entries..How to remove those entries?
View 6 Replies View RelatedI'm trying to uninstall backtrack 4 and put windows xp on my hard drive. I bought the hard drive clean and immediately put backtrack on it I've never dual booted with windows. I kept getting the no-apic timer error when I stuck in my windows xp boot disk and booted from the CD. I then used my live backtrack 4 disk and deleted the partition so I have a blank hard drive (so I thought). I tried booting from the windows recovery disk and I kept getting the GRUB error 22.
I went back onto the backtrack 4 live cd and created a partition on my hard drive, tried to boot to the windows recovery disk yet again and now I'm getting the GRUB error 15. I've been at this for about 2 hours now and haven't found an answer anywhere. I've tried going sudo grub then doing find/boot/grub/stage1 and I get the error 15 in there as well. All I want to do is install windows. All solutions I've seen say to do fixmbr in windows command line but the only disk I can boot to is backtrack 4 so that's not an option.
I have a flash drive that I used on my old netbook to temporally hold a copy of ubuntu as the netbooks internal drive was dead. I have since got a new netbook and wanted to return the flash drive to simple removable storage. I've re-partitioned it back to 14gb fat32 2gb ext2 and everything is working fine. Except that if I try to boot with the key inserted grub loads then errors imminently (sort of obvious if grub is still in the MBR but there is no menu.lst file anymore...) Googling for removal of GRUB just gives me loads of hits for how to restore windows mbrs when you dont want to keep linux anymore. None of these methods seem to have any targeting. I need to remove grub from sdb while keeping it intact in sda. sdb shouldn't even be bootable, so that when boot from usb is higher in the bios than boot from hdd the usb key is ignored and the hdd is booted as normal.
View 3 Replies View RelatedDoes anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies View RelatedI tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.
View 1 Replies View RelatedI've got an ASUS eee1005 that I'm trying to load eeebuntu -- I've read good things about it! However, I managed to get it (partially) installed using only unetbootin and the eeebuntu-nbr iso. Luckily I've got other working laptops in the house, or I'd be stuck because now I've got a partially installed distro that isn't allowing me usage of my wireless. Basically, what I'd like to do is be able to go back to the install process and load all the packages I want, which, hopefully, will give me NetworkManager so that I can finally connect. I can boot to the thumbdrive (8gig, btw) but I don't think I've got the right files on it to do the install. Here's what appears on the thumbdrive:
[code]...
I would think that with these files on the thumbdrive, it could find its way into the install process. Apparently not. I've read most, if not all of the 'install from USB' threads and how-to's, and it's still not working right - Now, having a partially installed distro (with GUI that's not GNOME, or KDE. . ?) Are there any options I can use to pickup where the install left off and start adding packages? Or should I just scrap it and re-install?
I recently learned how to add start up programs in the terminal using the following command:
Code:
ln /usr/bin/whateverprogram ~/.kde/Autostart
This worked, but now I want to remove some start up programs using the command line. Can someone point me in the right direction to what I need to do for this?
I'm assuming that default start up programs are not links in the ~/.kde/Autostart folder because when I run:
Code:
ls -a ~/.kde/Autostart
I only find the files that I have set to start up.
I had windows 7 installed in my 4th drive and windows vista as my boot drive. I formatted my windows 7 drive using vista and installed ubuntu 10.04 in its place. But still, when i update grub it shows windows 7 as one of the operating systems and my vista OS has been renamed as Windows 7. Please help. How can I remove windows 7 from the list, while i update grub.
View 3 Replies View RelatedI have a acer aspire one netbook which was duel booted with the latest version of Ubuntu but as i've stopped using the netbook as much and my family use it more, i removed ubuntu for them. But i just deleted the partion and now i am stuck with the grub luncher when i boot up saying Grub Rescue, partion not found, i can only boot via USB as its a netbook!
View 3 Replies View RelatedI am thinking the GRUB 2 more functionality was achieved at the price of presenting a user with what I experience as Byzantian mangle of default loaded templates, almost designed to make me give up and leave the defaults.menu.lst is no more - its now /boot/grub/grub.cfg DON'T edit it! /etc/grub.d has the new stuff. These are not just a list of boot-up choices anymore. It requires one to be a programmer.One called 20_memtest86+ is not really to be meddled with. I tried simply making it non-executable.The last choice, 40_custom, allows to add entries only - not quite what we wanted to do.
View 9 Replies View RelatedI updated my system and then this popped up:
I picked the option that is selected, then I restarted pc to apply updates and now my "grub" menu has 2 extra options.
The first 2 are the new ones.
I don't know what its for.. but when I start up the computer I pick the Ubuntu, Linux 2.6.31-19-generic
my grub2 start-up has every kernel for ubuntu since 9.10 in the list. can i safely delete these older kernels without screwing something up? also, where do they live?
View 3 Replies View RelatedI have Kubuntu 10.10 and Back Track 4 (BT4) Linux installed on my system. I think BT4 is based on Ubuntu 8.10.
I have the following line for my kernel boot options in /etc/default/grub file.
Code:
I need the rootdelay option for the Kubuntu 10.10 kernel but the BT4 kernel does not need it. But looks like setting this has a global effect and it waits for 80 (seconds ?) even when starting the BT4 kernel which is not required.
So is there a way to give the rootdelay option only to the Kubuntu 10.10 kernel and not to the BT4 kernel.
I am running the RedHat 7.3 install off a CD to put the system on an IDE flash drive. The flash drive appears as /sda1 on my system during installation. When I install the bootloader from the install CD it gives me the option of MBR on /hda which I do not want do. I select /sda1 and it puts the bootloader on first boot sector (not the MBR?) Although the installation works, is what I am doing creating a bootable primary hard drive? The flash IDE drive needs to be installed in an embedded system so my installation options are very limited i.e. the system does not have a CD-ROM or floppy to boot from. Are there options to put GRUB on the MBR of /sda1 during installation? Such as, with fdisk or the "force disk primary" option? Or, doesn't it matter?
View 2 Replies View RelatedI bought a new computer and installed ubuntu 10.04 about 2 months ago, and until yesterday it worked pretty well. Last night it acted kind of weird (slow, application would start loading and then just die) so I restarted the machine. That's when I understood that something bad happened.
When the machine starts and the os begins to load I get a bunch of text that says things like:
mount: mounting /dev on /root/dev failed: No such file or directory.
Same for sys and proc, there might be much more in the buffer but I can't seem to able to go up. I did not do any thing special last night and so I'm clueless of the reason for this. Also, since in this version of ubuntu the boot options are not displayed by default I tried pressing a key on boot in order to try another booting option but when I do that I just get the flickering cursor sign.
How do I remove old kernels from the Fedora grub menu? I have three currently and I want to keep only one old version to fall back if I have any problems with the current one. When I was using Ubuntu, I had Ubuntu Tweak which had an option to clean up old kernels from the grub menu .. is there something similar for Fedora?
I'm using Fedora 15 32-bit with Gnome 3.
I've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
Since I've been using Ubuntu, I've noticed that new entries for Ubuntu (the same but with the final number changed) occasionally appear in the Grub 2 boot loader. I'm talking about the first two entries in this picture, compared with the third and fourth entries here:Two questions:1. What are these entries? They appear to simply be the same OS but different versions. Are they generated when Ubuntu updates?
View 3 Replies View RelatedWhen i reinstalled Ubuntu i reinstall it on top of an existing not working ubuntu so now in the boot menu i still have 2.6.35-6-generic menu items but i can't find 2.6.35-6-generic anywhere how can i fix it?
View 4 Replies View RelatedUbuntu updated the Kernel but now i get the two versions (old an new one) in the Grub menu, how do i remove the old version.
View 7 Replies View RelatedI want to Re install windows 7, but when i do so it removes GRUB making me unable to boot into Ubuntu. Is there any way in which i can install Windows without removing GRUB?
View 6 Replies View RelatedI have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies View Relatedi am running windows and fedora 12..both are working smooth...today when i switch on the laptop in morning i discovered that it automatically start windows..when again i restart it..it does not give any option to me for selecting which OS to run..i have seen grub.conf file it is right...i have done nothing...windows is booting smoothly..how can i boot to fedora 12 without reinstalling.
View 4 Replies View RelatedIs there a way to access the list of boot options from Ubuntu? I don't want to change the options, just have someone access the information, then copy and paste it in an email so I can see what the heck is going on with their computer.
The problem is this:
User has 2 physical drives.
Drive 1 has XP
Drive 2 has another version of XP on it as well as Ubuntu.
We want the computer to have the option to boot into XP on Drive 1 and Ubuntu on Drive 2. Booting into XP on Drive 2 is an option.
We can get into Ubuntu, and XP on the 2nd Drive, but not XP on the 1st drive.
I recently switched my laptop from Ubuntu 11.04 to 10.04.2, and during the process, I used GPARTED to partition the drive so that I could have both versions installed simultaneously while I transferred files and settings and such. A few days ago, I removed the 11.04 partition, formatted and added that disk space to 10.04's /home partition. However, when I boot up, GRUB still gives me the option of loading into the newer 11.04 partition with the newer kernels. How do I remove those options from the GRUB menu? I checked the Ubuntu GRUB help pages, but didn't feel confident that I could do edits without messing up the 10.04 boot settings.
View 6 Replies View RelatedI have a multi-boot, multi-purpose machine and I'd like to change the names of some of the options in the grub boot menu.
View 2 Replies View RelatedIn order for me to get started with Linux, I downloaded & installed Virtualbox (V3.2.10) on my WinXP machine, and downloaded the Puppy Linux image from as per[URL].. When I start up the VM, I get a GRUB menu allowing me to boot
Quote:
Linux (on /dev/hda1)
Install GRUB to floppy disk (on /dev/fd0)
Install GRUB to Linux partition (on /dev/hda1)
I tried the first option, which results in Quote:
Booting 'Linux (on /dev/hda1)'
root (hd0, 0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda1 ro vga=normal
[Code]...
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
