General :: Removing BackTrack 4 / Grub Error 15
May 12, 2011
I'm trying to uninstall backtrack 4 and put windows xp on my hard drive. I bought the hard drive clean and immediately put backtrack on it I've never dual booted with windows. I kept getting the no-apic timer error when I stuck in my windows xp boot disk and booted from the CD. I then used my live backtrack 4 disk and deleted the partition so I have a blank hard drive (so I thought). I tried booting from the windows recovery disk and I kept getting the GRUB error 22.
I went back onto the backtrack 4 live cd and created a partition on my hard drive, tried to boot to the windows recovery disk yet again and now I'm getting the GRUB error 15. I've been at this for about 2 hours now and haven't found an answer anywhere. I've tried going sudo grub then doing find/boot/grub/stage1 and I get the error 15 in there as well. All I want to do is install windows. All solutions I've seen say to do fixmbr in windows command line but the only disk I can boot to is backtrack 4 so that's not an option.
View 4 Replies
ADVERTISEMENT
Jun 29, 2010
I have a Windows 7 OS installed as my main OS, it installed on its own HDD with 3 other data storage drives.
On my 5th drive I installed a copy of OpenSUSE 11.02 to see if I like it. I have decided I don't wish to keep it so I reformatted the drive while in Win7. Of course on restart I got the Grub 1.5 Error 22. All my HDD's are seperate and there are no partitions.
I have had to reinstall OpenSUSE just to get my PC to boot.
All I want to is remove OpenSUSE from my computer without losing my Win 7 install.
My Win 7 install disc fails to recognise my Win 7 so I can not get the recovery command prompt/repair options.
Can someone explain in say 5 simple steps to get back my original MBR so I can boot straight to Windows as I can't seem to find a guide that actually explains what to do. Either by doing it in OpenSUSE 11.02 or Windows 7 Ultimate 64-bit.
View 9 Replies
View Related
Jul 20, 2011
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies
View Related
Aug 23, 2010
I dual booted Ubuntu with Win XP, and decided to upgrade XP to Win7. Thought I knew how to do it, so excuse my dumbness. Here's where I'm at: I booted GParted, and deleted the /, /home and swap partitions, making unallocated space. I expanded Win XP partition and tried to re-boot, expecting only Windows to show. Instead, I got the Error 22 error when Grub was the first thing to load. So, back to GParted, deleted the primary partition, created a new bootable partition, formatted it NTFS, and put the Win7 disk and rebooted. This time I got a Windows error "can't load NTLdr".
Rebooted the computer without the disk, and got the Error 22 again. So it seems (?) that I'm not able to change/remove or otherwise, the Grub boot file. So the drive is currently useless, unless someone can tell me how to get the disk back to a bootable state where I can load Win7, after which I can create Ubuntu as a dual boot again.
View 4 Replies
View Related
May 28, 2011
I am facing a problem while installing backtrack 4.0 on my virtual box. After assigning a hard drive and booting from the live cd, i am receiving a error message as follows:
Loading, please wait...
Buffer I/O error on device hdc, logical block 76636
(this statement gets repeated like four times with different logical block id.
SQUASHFS error: squashfs_read_data failed to read block 0x5bb337b9
SQUASHFS error: unable to read is index table.
It is not the first time i install operating systems on virtual box though it is the first time i receive such an error with backtrack.
View 1 Replies
View Related
Nov 29, 2009
I have a flash drive that I used on my old netbook to temporally hold a copy of ubuntu as the netbooks internal drive was dead. I have since got a new netbook and wanted to return the flash drive to simple removable storage. I've re-partitioned it back to 14gb fat32 2gb ext2 and everything is working fine. Except that if I try to boot with the key inserted grub loads then errors imminently (sort of obvious if grub is still in the MBR but there is no menu.lst file anymore...) Googling for removal of GRUB just gives me loads of hits for how to restore windows mbrs when you dont want to keep linux anymore. None of these methods seem to have any targeting. I need to remove grub from sdb while keeping it intact in sda. sdb shouldn't even be bootable, so that when boot from usb is higher in the bios than boot from hdd the usb key is ignored and the hdd is booted as normal.
View 3 Replies
View Related
Apr 27, 2010
Does anyone knows how to remove files from grub loader.BTW i found some tutorials but they don`t seem to work.I`ve tried Alt+F2 then I`ve edited this command: gksu gedit /boot/grub/menu.lst but it doesn`t seem to work what do I do?
View 5 Replies
View Related
Dec 28, 2010
i installed ubuntu 10.10 netbook edition and it installed fine, i updated everything on and now when it starts i have 2 versions of it to select from 2.6.35-22 and 2.6.35-24 as well as the recovery versions of it. how do i remover these options from the grub menu? in addition to this i also have a question about updating python on it, its running version 2.6.6 and i need 3.x. how do i upgrade it?
View 14 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Jan 30, 2011
I have the following problem. I tried to make a persistent USB Backtrack 4 r2. I followed the steps according to the instructions and did not noticed any errors.
fdisk /dev/sdb
Command (m for help): d
Partition number (1-4): 1
Command (m for help): n
Command action
[Code]...
I can boot from USB because when i use Unetbootin everything works fine. Although it'snot persistent in that situation. I seachered the web but i can't find the solution. I have run a script which i ran into on Sourceforge.net. The results are in the attachement. But unfortunately i am real Newbie on linux so..
View 6 Replies
View Related
Jan 5, 2011
I'm using Ubuntu 10.04 and during my tries to free space I've removed several packages such as: openoffice, all editors, and some more packages such as players and printers drivers that I don't need and seem o.k to remove. However, after restart, the graphical interface doesn't load, I'm in the xserver, I have console but not gui. I was wondering if anyone can tell me which packages I should not remove or let me know of dependencies I need to consider when messing with packages?
View 1 Replies
View Related
Aug 3, 2011
I tried to install ndiswrapper , but its showing error,while executing make command
make[1]: Leaving directory `/usr/src/linux-source-2.6.35.8'
make: *** [LINUX] Error 2
View 2 Replies
View Related
Oct 11, 2010
I had windows 7 installed in my 4th drive and windows vista as my boot drive. I formatted my windows 7 drive using vista and installed ubuntu 10.04 in its place. But still, when i update grub it shows windows 7 as one of the operating systems and my vista OS has been renamed as Windows 7. Please help. How can I remove windows 7 from the list, while i update grub.
View 3 Replies
View Related
Dec 31, 2010
I have a acer aspire one netbook which was duel booted with the latest version of Ubuntu but as i've stopped using the netbook as much and my family use it more, i removed ubuntu for them. But i just deleted the partion and now i am stuck with the grub luncher when i boot up saying Grub Rescue, partion not found, i can only boot via USB as its a netbook!
View 3 Replies
View Related
Mar 27, 2010
I am thinking the GRUB 2 more functionality was achieved at the price of presenting a user with what I experience as Byzantian mangle of default loaded templates, almost designed to make me give up and leave the defaults.menu.lst is no more - its now /boot/grub/grub.cfg DON'T edit it! /etc/grub.d has the new stuff. These are not just a list of boot-up choices anymore. It requires one to be a programmer.One called 20_memtest86+ is not really to be meddled with. I tried simply making it non-executable.The last choice, 40_custom, allows to add entries only - not quite what we wanted to do.
View 9 Replies
View Related
Aug 11, 2010
I am having a problem installing SLES11 on a new server. It goes fine through the setup until it gets to GRUB, it gets me the following error message: Error occurred while installing GRUB
[code]...
I cant continue the installation without this
View 5 Replies
View Related
May 21, 2011
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
View 29 Replies
View Related
Jun 10, 2011
How do I remove old kernels from the Fedora grub menu? I have three currently and I want to keep only one old version to fall back if I have any problems with the current one. When I was using Ubuntu, I had Ubuntu Tweak which had an option to clean up old kernels from the grub menu .. is there something similar for Fedora?
I'm using Fedora 15 32-bit with Gnome 3.
View 6 Replies
View Related
Mar 22, 2010
I've recently installed Vmware on Vista and I am using that to run Linux. I prefer this method over duel booting as I can quickly switch between the two OSes. So here is what I would like to do.
1) Remove swap partition (not needed).
2) Remove Linux and format partition to NTFS for windows use.
3) Remove Grub.
What I don't want to do.
1) Reinstall Windows Vista (Lots of programs installed).
View 2 Replies
View Related
Jul 8, 2010
Since I've been using Ubuntu, I've noticed that new entries for Ubuntu (the same but with the final number changed) occasionally appear in the Grub 2 boot loader. I'm talking about the first two entries in this picture, compared with the third and fourth entries here:Two questions:1. What are these entries? They appear to simply be the same OS but different versions. Are they generated when Ubuntu updates?
View 3 Replies
View Related
Aug 19, 2010
When i reinstalled Ubuntu i reinstall it on top of an existing not working ubuntu so now in the boot menu i still have 2.6.35-6-generic menu items but i can't find 2.6.35-6-generic anywhere how can i fix it?
View 4 Replies
View Related
Nov 23, 2010
Ubuntu updated the Kernel but now i get the two versions (old an new one) in the Grub menu, how do i remove the old version.
View 7 Replies
View Related
Jul 30, 2011
I want to Re install windows 7, but when i do so it removes GRUB making me unable to boot into Ubuntu. Is there any way in which i can install Windows without removing GRUB?
View 6 Replies
View Related
Feb 14, 2010
I have XP and win 7. I want to triple boot with Debian.When I install, grub finds win 7 and XP and says everything should be fine, but then when I boot, only debian appears.This was fixed by doing update-grub2 after logging in.Now, I have win 7 bootloader as an option. However, when I boot into XP, and then reboot, grub disappers. he screen just says welcome to grub and then a blinking cursor.
View 10 Replies
View Related
Nov 23, 2010
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
View 5 Replies
View Related
Feb 5, 2011
My brother has Tri boot Ubuntu ,7 and Vista ..GRUB2 is the bootloader..The problem : At boot after the Lenovo splash disappears , there appears some 4 to 5 lines of error , error:syntax error GRUB or similar..This is visible only for a fraction of a second before the GRUB2 menu pops up...
The OS es load properly on selection in the menu so no loss of functionality One another problem is there is no OS highlighted by default and the timeout message "Automatic Boot in 10 Secs" does not appear Reinstalling GRUB does not solve the issue
View 1 Replies
View Related
Mar 12, 2010
Basically this is my problem:
1.) I want to remove Ubuntu and Grub and have only Windows XP on my PC again. (Remember the good old days?)
2.) I want to put the Ubuntu partitions back into Windows partition. I need the space.
3.) I can't use an XP disc because I don't have one. (No. Neither does anyone else I know.)
4.) FIXMBR isn't working... am I doing something wrong and what other options do I have?
5.) Does anyone know how do this without removing all my files on the XP? I can't afford to backup everything on my XP. I CAN'T!
View 5 Replies
View Related
Mar 15, 2010
I have Karmic installed, but still using old grub from Jaunty. I decided to get rid of my Vista dual boot so I used gparted, deleted the partitions and moved and enlarged my Ubuntu ones. Grub then didn't work, presumably because I deleted the MBR. I then installed Opensuse 11.2, which I assume still uses old grub too. This gave an Opensuse option which worked, and a Karmic option which took me to the Karmic bootloader, but Karmic did not load. I then tried some instructions to repair grub using the Ubuntu installer, installing grub to my extended partition. This tells me there is no operating system found. I then tried following the instructions at [URL].
My fdisk -l looks like:
dev/sda4 * Extended partition
dev/sda5 Ubuntu /
dev/sda6 Ubuntu /home
[Code].....
View 3 Replies
View Related
Jun 6, 2010
I am using ubuntu 10.04 and I would like to keep only the main menu,and i have to disable all the other options including recovery and memtest in the GRUB menu..How to do this..?
View 9 Replies
View Related
Nov 7, 2010
my computer screwed up and the MBR or GRUB was screwed up, so I got my Windows 7 repair disk and repaired the MBR. Then I needed grub back so I could boot into Ubuntu so I went and looked for something to just install grub and found this Auto Super GRUB Disk (ASGD) thing. So I installed it and then it appeared on the windows boot manager menu when I started up and I went into it and installed grub again. Then when I booted back into windows, it asked me if I wanted to remove ASGD and I clicked yes. Ever since, the ASGD entry has not been removed from my boot menu for some stupid reason. What happens is the computer starts and goes into GRUB which is what I want and then if I go into Windows 7, it will then come up with another menu asking whether to boot into Windows 7 or the ASGD, even though ASGD isn't there anymore. I can still boot into windows, but this extra menu that comes up every time is starting to **** me off. I've tried EasyBCD and the entry does not come up on there.
View 5 Replies
View Related
