Ubuntu Desktop 10.10 boots with disconnected monitor with a screen resolution of 1024x786 ... which in fact is great - other distributions won't even boot ...
How can I change this resolution? ... cause I'am operating my system via VNC and preferably set it to something higher.
I am using Ubuntu 9.10. I can do remote desktop into the system with a monitor attached but when I reboot the system without a monitor attached I am unable to do remote desktop into it.
I want to use this system as a headless system and only use remote desktop to control it.
So I guess I need to start X and gnome without a monitor attached.
What do I need to do to get this to run?
I have been trying and trying to get remote desktop to work without using a monitor connected to the server. I have the server set up to where it can be rebooted and everything perfectly fine remotely (as long as it has a monitor). Unfortunately, I need this to be not connected to a monitor-PERIOD. I would think this would be something to be working out of the box, but I guess not.
View 5 Replies View RelatedHow do I do this in 10.4? I need to be able to Remote Desktop into my server over SSH but can't because I don't have a spare monitor on hand... and Ubuntu won't start a desktop if it doesn't detect a monitor.
View 6 Replies View RelatedI have an old computer that no longer has a monitor (it just broke) and I want to access it through my laptop through remote desktop. It has Ubuntu 11.04 on it but I don't know how to set up Remote Desktop on it without a monitor. I have a mouse and keyboard though. Is it possible to set it up without a monitor?
View 2 Replies View RelatedI have installed vnc-server and now if I would change the resolution in remote desktop I can't, I receive this error:
[URL]
The monitor is a dell 2009 w (16:10 with around 1680x1050 IIRC) I have a fujitsu desktop with the intel core i5 CPU. the crux is the i5 has an integrated GPU. hwinfo says 'clarkdale integrated graphics controller' and yast tells me the same too, knowing the monitor model as well (with correct resolution) So we have an intel GPU ... but the resolution of the kde desktop is always the 1024x768. sax2 do not accept any other resolutions - he knows only threee, one larger at 1280x1024. But even if i try to turn it on he falls back to 1024x768. this is independed from runlevel 3 or 5. the /etx/X11/xorg.conf knows the monitor and the two modes 1024 and 1680 - but everyhwere else it seems that it is unknown, using default vesa mode... the gfx tools seem to ignore the ability of the higher resolution.
View 4 Replies View RelatedI maintain plain vanilla Ubuntu 10.04 systems for several friends. Each machine has only one user, the owner. I use Remote Desktop to instruct and to perform maintenance. Here's my problem:After updating the system, if the kernel has changed, a restart is needed. If I do a restart, I then have to phone the owner to insert his login credentials in the gdm login screen, before I can do anything else via Remote Desktop on that machine.There ought to be a simple way I can avoid the phone call and login myself.
I'd strongly prefer not to use any software that is not included in a plain vanilla Ubuntu 10.04 installation. And I don't want to weaken system security beyond what it is now.Is there a solution? Or, what is the simplest solution?
I'm working on getting my myth box hooked up to my Sony flat panel display.Originally the nvidia drivers could not read the EID, so defaulted to only 640x480 over my HDMI-DVI connection.I manually updated xorg.conf with a mode for the resolution I know the thing can handle. Suddenly there are several resolutions avaialble in nvidia-settings and it seems to be communicating with the TV, as it is now listed as a Sony FP display rather than a CRT.I'm able to change the resolution now as expected.my problem, however, lies with the TV itself. I can't seem to get it to actually display the output. I'm able to remote desktop into the box and can see Gnome logged in and everything.However nothing on the TV itself.How do I troubleshoot this? Am I missing something obvious?
View 6 Replies View RelatedI have my main box, Ubuntu 10.04lts, and I am trying to use remote desktop viewer to see the desktop on a Windows XP machine. The machines are side by side The Ubuntu box is hardwired to my network router, and the XP machine is connected via wireless. Both get to the internet fine, and I can ping the Ubuntu box from the XP box. But, I cannot ping the XP box from the Ubuntu box, and Remote Desktop Viewer won't establish a connection to the VNC server I have running on the XP box.
View 6 Replies View RelatedI am using 2 PCs, both running ubuntu. I want to connect via remote desktop (vnc, ssh -X, etc) form one to the other. However, what the solutions I found until now offer me, is the possibility to create a new desktop session and view that one (or run an application an view that one). I have an application running on the server, and I want to see that application, without needing to restart it or running it again in a new desktop. Is this possible?
View 1 Replies View RelatedI am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
I have set up a server running ubuntu desktop, and I'm able to logon through remote desktop (win 7). The problem is that if I logon from computer 1 and open some programs, I don't see these programs when I logon from computer 2.I logon with the same user, so I find this strange. Is there some setting I have missed to be able to see the same from any computer (logon through remote desktop).
View 5 Replies View RelatedHow to change the resolution of my tv to be the same as the monitors. I mean cloning ..
View 9 Replies View Relatedjust installed ubuntu10.04 has set monitor resolution to 800x600 i need 1920x1080 i have been at this for two days now and getting absolutely no where , i could set this on windows in 5 minutes , why does it need to be so hard on ubuntu, i really prefer ubuntu to windows but problems like this really can drive one to despair. i have tried so many different web sites and follow instructions but keep getting command not found which i dont understand why. here is an example of something i tried in terminal xrandr --output VGA --mode 1920�1080 --rate 50 i get warning: output VGA not found; ignoring.many other things i have tried come up with command not found .
View 4 Replies View RelatedI have a laptop with an "ATI Technologies Inc Mobility Radeon HD 3400 Series" video device. I have trouble configuring the second VGA monitor attached to the laptop to 1024x768 resolution. It is always stuck on 2560x800. My xorg.conf file is as follows:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
Option "DefaultServerLayout" "dualscreen"
EndSection
[Code]...
Just installed 11.04 on a box that it is on a kvm switch. As long as the switch is connecting the monitor to the booting Ubuntu box, the resolution of the monitor is detected OK. However, if for some reason I am working on a different box and the KVM switch is routing K V and M inputs to the other box, then Ubuntu defaults to what seems a botched VGA setting (i.e. it chops off top and left sections of the display).While in this "VGA" mode if I log out and log in, it re-detects the resolution ok.Is there any way to force Ubuntu to use a specific resolution no matter what? In this way, if I am working on a different box while waiting for Ubuntu to load, when I switch the resolution will be OK.I tried the only thing I can think of and this is to set the "good" resolution as "default" for "all" monitors, but it has no effect.
View 2 Replies View RelatedI was playing around with the NVidia settings control panel today and I saw that its Resolution dropdown was giving me options for
1680*1050
1920*1080
My monitor supports up to 1440*900. When I selected one of the higher resolutions, it didn't look very sharp, and the text was somewhat fuzzy and lacked clarity. Was this rendering being done by the graphics card but 'compressed' by the monitor?
The status said 'switched to metamode'. I tried searching but found nothing - what exactly does MetaMode mean? I'm more interested in understanding what was happening, only experimenting with the higher resolutions. What monitor and resolution do you have?
I found this thread by looking up ultramon replacement: [URL] I would like to use "swapmonitor", to make it easy to move windows from monitor to monitor in a dual desktop environment. I have no idea how to install it.
View 1 Replies View RelatedIs there a way to have drag and drop access between Linux and a Windows remote desktop connection?
View 1 Replies View Relatedwhy both ubuntu and centos 5.4 will only give me 800x600 resolution on my monitor when opensolaris immediately gives me 1280x1024?The first time I tried ubuntu it gave me 1280x1024 and now will only make 800x600...This is a viewsonic VG930M Monitor..
View 4 Replies View RelatedI simply ran the Guest Additions CD (on VirtualBox), double clicked the x86 (I'm running 32-bit) executable, and got that error.
View 6 Replies View Relatedso when ppl bring me their computer and i install them ubuntu in my monitor when they take their computer to their home ubuntu does not keep the screen resolution i set for them.
View 4 Replies View RelatedI have an asus eee pc with a 7 inch screen. the screen is small and today I attached a 15 inch dell monitor to increase the screen size. the dell monitor is displaying a 720x 400 resolution which results in a very large screen but no more space on the screen. I can select 1024x768 resolution in system,preferences, display. HOWEVER I cannot select APPLY to this resolution because the apply button is not visable on the bottom of the screen because the display is SOOOO big.
View 4 Replies View RelatedI have a 30" apple cinema display. The monitor handles up to 2560 x 1600 pixels which is the optimum resolution for this monitor. I found out that most apple monitors have nvidia graphic card.The monitor is hooked up to a motherboard Intel BOXDG45FC. This motherboard has Onboard Video Chipset Intel GMA 4500. However, using KDE interface I dont get beyond 1280x800 resolution for the monitor.How can I get the maximum resolution for the monitor?
View 9 Replies View RelatedI just switch from windows to use ubuntu 10.04. I am still learning how to set things in ubuntu.
One of the problem is that I can't set my secondary (external) display to my favorite one. I have 22'' screen (max 1680x1050) but I love to set it to 1280x800.
I follow instruction from this website https://wiki.ubuntu.com/X/Config/Resolution and my display detail is like this code...
Somehow, I get the new mode in LVDS1 but not in VGA1. How could I add this new mode in VGA1?
I have been using Ubuntu for a couple of years and always at the 1024 768 screen resolution.
I just finished installing version 10.04. It defaulted to 1280 1024.
I much prefer the 1024 768 because it is better for my older eyes, but when I attempt to change, the screen goes black for a minute and then stays at 1280 1024.
Since earlier versions of Ubuntu did it, this should also, but..
I just switched monitors to a Viewsonic VX2025 and I am unable to get beyond 1280 x 1024 using the nvidia x server settings. My graphics card is a GeForce 5200. These are connected with a DVI plug. I would like to be able to set my resolution to 1920 x 1080. (Also, the card and monitor worked at 1920 x 1080 in a previous windows machine.)
I have done a fair bit of searching and it appears that my issue is either the x configuration file or EDID. After 2 days of working with this it's gotten confusing to say the least. So, I'm looking to see if others have had a similar problem and how to solve it. I have not altered an x config file before, so not exactly sure of where to begin.
The image on my external monitor is blurry. the resolution is right, but the Monitors menu shows the monitor to be a 20" while it is actually a 19". So this may be a hint. I would like to know how to adjust the monitor size (if possible). How can this be done? I am running 10.4 on a dell precision 4400, connecting with the monitor via VGA.
View 2 Replies View RelatedI'm not sure if this is the right category to ask for help but here it goes:I have a laptop with ubuntu 10.04x64 and i have bought recently a samsung xl2370 which has a max resolution of 1080p but the maximum resolution my laptop recognizes is 1440x900 is there any way to solve this?
View 3 Replies View Related