I am trying to recover some windows files of a friends unbootable computer. I have loaded Live CD and can access the windows files but when I open "Documents and Settings" the folder is empty.
View 4 Replies
I've been scouring the internet and these forums for answers and have yet to figure anything out.Here's the situation: My boss's computer (HP running Vista) decided it didn't want to boot anymore. (Error: Cannot find Bootlog.xxx) My boss used a recovery disk to attemp a 'repair' but unintentionally began a format cancelling it at 1-3%. I created a LiveUSB that I can boot off of, and Ubuntu recognizes 52gb of Data on the drive. However when I go to view the drive nothing is there. I am assuming that the 'page file' was deleted although the rest of the information wasn't.
My question is: Is there anyway to access this data although the information telling the computer what is there and where it is has gone AWOL?I'm trying to get the payroll information off of the computer so she can finish her taxes, I will be working on this all night. If anyone wants to provide real time help my AIM screen name is 'Fryphax'.
While trying to create a bootable SD to install Ubuntu on a netbook, I accidentally formatted a part of a removable HDD that was connected to my computer. If I remember correctly, the partition I formatted wasn't the main partition of the HDD. In that case, does it make sense that the whole disk was wiped out? On that HDD there's a year worth of work, I really need that back.
I was using PhotoRec with some luck: it started to recover files, but with no names, which is almost useless, considering a lot of it are recordings - useless without their names. Is there any good recovery program that will recover all my files incl. names? Is there a easier oprtion, considering that I think I didn't really format the big partition of the HDD? What may it have been, the small partition?
I installed Ubuntu 9.10 on a 100 GB partition of my 120 GB hard disk. I left the other 20 GB as free space. I moved my data (about 20 GB) to my home folder. Everything was fine for two days. Then I installed a few packages with the help of Update Manager.he installation, I was asked to reboot. Upon reboot, I was always taken to the Memtest86+. It was as if GRUB wasn't detecting my ubuntu installation.Then I installed Ubuntu again by taking up 20 GB of the existing 100GB partition. I am currently using this installation. When I try to access the older installation (the 80 GB one), I find that all my data in my home folder is broken. (screenshot attached - homefolderbroken.png). homefolderbroken.jpgWhen I see the properties of the 80GB partition, I can find my data is still present (screenshot attached - data.png
View 2 Replies View RelatedI can't boot into Ubuntu 10.04. Because of this problem. [URL] ppl have told me to ditch wubi and just have a clean install so i guess i will since it seems like the only option ppl are recommending to me. but i need to get my files of ubuntu first. i cant get into root.disk thu win7 so i am running live cd atm. but in live cd i do no see it also. where are my files?
View 1 Replies View RelatedMy powerbook died (motherboard or something...). I took out the Hard Drive to mount in an external enclosure. I tried accessing the drive in both windows and mac - no luck. So, I thought I'd try it in Ubuntu, thinking maybe it would show up - no luck. My question: is there any way to access the files from my drive using linux? Is there any way to mount it? The drive is spinning, and when I enter sudo fdisk -l ; I get this:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code]....
This: Disk /dev/sdb: 160.0 GB, 160041885696 bytes is the drive I want to get my files off of. So ubuntu is reading the drive in some fashion.
I have a 64-bit HP G60 Notebook and I installed Ubuntu 10 The problem is that if i want to recover Windows 7 from the Partition I can i pressed Esc and selected Recovery but it said wrong filesystem then when booting Ubuntu i wend down to Windows Vista Loader and it opened HP Recovery but said there was a problem. I want to get Windows 7 back with all HP Factory software installed
View 9 Replies View RelatedTrying to follow [URL]
View 9 Replies View RelatedI need to get back two avi movie files but I've deleted hundreds and any recovery might try and drop them back on my small hard disk and overwhelm it! I know the files include the word 'Archer' but I'm using Formost, which is very easy to use, but it doesn't seem to allow for the searching of specific files by name. I can recover by type ie, avi, jpeg, pdf.....
Are there any recovery programs that will list files in a table so I can pick the ones I want to recover or do a search in Terminal for my 'Archer' files?
By mistake i have deleted few files from my NTFS partition,is it possible to recover all those files..?
View 9 Replies View RelatedAfter realizing 10.04 Final doesn't support Intel 855 graphics card the hard way (upgrading to 10.04 from 9.10), I did some very silly things and now cannot even choose past kernals or go into failsafe graphics mode (which had worked prior to this).Long story short I screwed up GRUB. Because I am an amateur end user.I still have the 10.04 live cd. Can I reinstall this to put GRUB back to the original state?
View 9 Replies View RelatedSo when upgrading to 10.04 there were a few errors and now the machine will not boot up. All I am trying to do now is recover some pictures from the HD so I can to a clean install. I used the Ubuntu 9.04 install disk to gain access to the HD and was able to backup some of the files but other files are locked somehow. When trying to copy them it says that "folder content could not be displayed. You do not have the permission necessary to view the contents." The files in question have orange X's on them.
View 3 Replies View RelatedSo my old computer died. I was Dual-Booting Jaunty and Windows XP. Now I'm trying to recover my files from the hard drive, but of course, you can't do it from Windows 7. I could recover everything from the Windows Partition, but Windows doesn't even see the Ubuntu Partition.
So I popped in a Lucid Lynx live CD to recover my files, only to find out that several seemingly random folders within the Documents folder have a cross on them. When trying to access them I get a message saying I "Do not have the permissions necessary to view the contents."
What should I do now? I really need to recover those files!
I have a Macbook that I need to recover files off of. Problem is that the screen is bad, and I have no way of booting the thing up to access the filesystem. So now I have the hdd plugged into a PC and have booted the ubuntu live cd. I can access the drive, but my pictures, music, and library folders have a red x marked over them indicating I do not have permission to view their contents. I have been trying to change the permissions to no avail. For some reason I cannot navigate to the directory through the terminal to change the permission. Instead, when I go to cd /media/Macintosh HD is throws a No such file or directory error.
The Macs hdd is already mounted, because I can access its file structure. I need to know how to get into the Macintosh HD through the terminal so I can give read/write permissions to the music and pictures folders.
I purchased a larger hard drive to upgrade my HTPC running MythTV and a Samba file server. I put the old hard drive into an e-SATA enclosure and can still boot to it to access my files, but I can't seem to mount it correctly under the new installation to copy over my files even though I have the mount passphrase and encrypted filenames key.I have tried using this howto, but I run into problems with the encrypted filenames.This is how I'm doing it. I replaced the actual key data with A's and B's to protect my keys:
Code:
$ sudo -i
# ecryptfs-add-passphrase --fnek
[code].....
I have a laptop that I have been running 64bit lucid on after some problems with NFS Samba and SMB the installation got a bit trashed after some workarounds I removed nautilus completely and rebooted and got the looping login screen........ then I tried a suggestion to purge gdm but that left me with a blank grey screen and a mouse pointer. X11 has failed so I have no graphics
I can login properly to the drive from the terminal and can access my drive contents... I cannot load dolphin or nautilus from the terminal. So I have booted from a live cd and have moved some of my data to another partition but some is locked to the owner (me). How can I get my locked data opened so I can copy or move it to another drive, so I can perform a fresh install.
I recently accidentally corrupted my windows vista partition whilst trying to extend it via gparted under ubuntu 11.04 and then cancelling it shortly after starting. Resulting in me being unable to boot into vista (I don't have another copy of any windows OS so I'd really like not to have trashed this one )
Looking on gparted now my partition is Fat32(?) and apparently only has 36mb used =/
A friend of mine had inportant files on his windows 7 PC. the pc took a virus, he took it with some "experts" wich happily DELTED the partition and reinstalled W7, and apps, WITHOUT backing up his files.
Ibe faced similar cases before, and on windows ibe used Recuva with mixed resutls, but. Is there an application in linux i can install on my opensuse 11.4 box to do the same task? Can you guys recommend good linux software (available for suse) that will do this? I read about "TestDisk", but ibe never used it.
I have an external drive that has been formatted as NTFS and I need to recover the files. For the most part, on windows, I can read the drive however When I'm copying, it interrupts with an I/O failure. Is there a way to copy the files from Linux and have it continue even if it has an error?
View 3 Replies View RelatedI'm trying to fix my girlfriend's computer which is running OS X, which will boot but doesn't work beyond the login screen. I've removed the hard drive and can access most of the files, but she encrypted her home directory with "Filevault" and I think her home directory automatically mounts from some image somewhere. She does remember her password, but I'm not really sure where the encrypted files are on the hard drive and I'm not sure how to unencrypt them.I was thinking of trying to boot the external hard drive in some kind of virtual machine, but I don't know how to do that either.
View 6 Replies View RelatedI have a dual boot machine (Windows 7 and Debian). W7 and debian are on the same HD but on different partitions. The debian partition is an LVM encrypted one.
The W7 needs reinstalling, and as I understand the process will overwrite the debian bootloader (grub).
Question: Is there a way to save the current bootloader and recover it after I've reinstalled W7, so I wont have to reinstall debian from scratch?.
I plan to re-install W7 on the same partition it is now, without overwriting the debian partition.
I didn't know a resize operation on a 750 GB disk was going to take 40+ hours, and I was biting my nails the whole time, until the power went out when "only" 8 hours where left.I can still mount the partition, and many of the files are still there, but some files show as '? ? ? ? ? filename.ext' with ls -l.If I try to go inside such a directory: Input/output error.
View 1 Replies View RelatedI was installing Ubuntu to the internal disk in my main machine, with all external drives unplugged for safety - then discovered I had accidentally chosen the external drive and it wasn't unplugged. (Seeing three drives not two listed as installation targets should have tipped me off, but I guess my IQ was low that day.)The external drive, in compliance with Murphy's Law, was my backup drive with all vital current files.The last few months of work gone.Now the drive shows only the stuff I normally expect in / on any Linux machine. It mounts showing as ext4, but the disk was (I'm 98.5% sure) originally ext3.However, the installation did not finish.Whatever files got copied, clobbered only a fraction of the disk. df reports only 1% of the space used.Maybe the bulk of my valuable files are okay, and could be recovered with some tool?
There are other questions on this site about file recovery, but many are for Microsoft Windows, or for malfunctioning disks, or some other situation. I'm on Linux with a physically healthy external disk. I'm fairly sure that the more recent and more important files are in multiple copies on that disk, so if one copy is clobbered there's hope to get the second copy.
I'm running Debian Squeeze AMD64 with full disk encryption and LVM. After reinstalling Windows 7 I lost GRUB from the MBR. I managed to install GRUB after following this guide and using an Ubuntu 10.04 graphical installation disc, but I only get to a GRUB CLI when booting, so I can't actually choose an OS there.
I tried following this guide but I'm stuck after "# Mount the partitions to /mnt/root" and don't know what to do.
Does anyone know how I can fix GRUB so I get to choose between Debian and Windows 7 there?
i am a new guy here..i unfortunately removed all my files from /home folderrm -rf ~ /. picasa / As some of the files were important i tried recovering data using foremost..i used the command foremost -i /dev/sda1 -o /mnt/foremostThen there started a process..it was downloading something..and i left the computer for an hour or so..when i return there was nothing on screen..so i reloaded the system..And after that when i try to login i get the error"xsession: warning: unable to write to /tmp; xsession may exit with an error"..so when i googled for it i found its because there is no memmory in my /root ..so i tried login via console (tried ctrl+alt+f1..after the login screen appears..when i type ctrl+alt+f1 i get a black screen)..but nothings happening...how can i login via console..can my datas be recovered.
View 6 Replies View RelatedI been trying to figure out why after updating to the newest version of ubuntu the system didnt work anymore, but now my main concern is trying to recover files that I had on my computer, how can I do this?
View 5 Replies View RelatedYesterday, while upgrading from Ubuntu 10.04 to 11.04, the computer crashed. For this reason, when I reboot, Ubuntu doesn't recognize any longer the root folder and so on... and halts execution in a blank screen (well before the login screen).I'm currently running LiveCD and I can see the Filesystem with the root folder, the bin folder, home folder and so on....My question is How can I access the files I had in my desktop from LiveCD? I know the user and password so how can I access it?
View 4 Replies View RelatedI just installed Ubuntu 10.04 from the LiveCD--smooth install, OS looks great-elegant.Now, since I have to use dial-up, I need to install additional files from the LiveCD that aren't installed by default:
[LiveCD]:poolmainwwvdial wvdial_1.60.3_i386.deb
...and
[LiveCD]:poolmainwwvstreams [3 sw packages]
How do I get these files from the CD, and make them run on the Ubuntu installation? I've checked in the UI, and see various terms I don't yet understand. Do I extract the packages? Or do I open a pgm in Ubuntu, in which I specify the path to the files on the CD?
I'm going to use an external USRobotics 5637 USB modem that is supposed to work in Linux; just need to configure Ubuntu for this. I have the ISP DNS server numbers and modem is ready. I've seen online info, but I'm stuck at this very basic step.
I recently had to reinstall windows on another partition on my hard drive due to there not being any good way to run unrealed under ubuntu (believe me, I've tried everything) Is there a way to install grub from windows without using a liveCD or booting to a USB? I have downloaded WINGRUB and to be fair I have no clue how to use it.I no longer can access my Ubuntu partition.
View 1 Replies View RelatedI would like to access my files from the live Ubuntu cd but It claims I am not the owner and wont give me Permission.
View 1 Replies View Related
