Ubuntu :: Big Print Job Sitting In The Queue?
Jan 24, 2010have a big print job sitting in the queue which I don't need (the print job that is) .. QUESTION: how do I clear the print queue in Ubuntu 8.04
View 6 Replies
ADVERTISEMENT
Software :: Firefox, Okular Don't Put Print Job On The Print Queue (silently)?
Feb 16, 2011I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies View RelatedUbuntu :: Printing - Print Job Shows The Printer Status As "idle" And The Print Queue Is Empty
Jul 15, 2011Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies View RelatedUbuntu :: Can't Delete Job From Queue - Can't Print XP
Aug 23, 2010The Gnome Print Manager found the printer with no problems. The correct driver was available - so I installed it. The printer shows up when called by a print job I want to send. The queue pretends to process it. The queue states "completed." Then Nothing comes out of the printer. XP shows the print job as pending. Still nothing comes out of the printer. And I can't delete the job from the Ubuntu queue (because that lying SOB tells me the job is completed). I can't print from XP to that printer until I delete or cancel the Ubuntu job (from the XP queue) - or clear the XP print queue (by deleting spool files). Permissions on that printer are not an issue. Printing from Ubuntu to that printer worked OK on earlier versions of Ubuntu.
View 1 Replies View RelatedUbuntu :: Print Jobs Stuck In Queue?
Mar 28, 2010I have 2 printers plugged into a Windows XP PC (an Epson Stylus Photo RX580, and an HP Laserjet 1020) with full sharing on and everything, and is shared with other Windows PCs via the network I have set up. It has worked perfect. But today I added a PC running Ubuntu 9.10 and and can't figure out for the life of me what I am doing wrong. I installed both of the printers via the GUI in Administration, and both of them are detected and Ubuntu says they're working. But when I put something in the queue to print it stays there with the status "pending".
View 8 Replies View RelatedRed Hat / Fedora :: CUPS Print Queue Is Disabling?
Apr 16, 2011I am running CentOS 5.4 with CUPS v1.3.7 and have a Brother printer (MFC-5895CW) that connects wirelessly to a SonicWall device. The SonicWall is hardwired to my PC. I have found that periodically, the printer queue will become disabled and the only way to re-enable it is to issue a cupsenable command.
I believe that queue only gets disabled if the wireless connection drops in the middle of a print job. I've tried dropping the wireless connection and then bringing it back up when no print jobs are active or pending and the queue is fine for the next print job that is sent when the connection is up.
I did a little research and found that my version of CUPS contains support for an ErrorPolicy setting in the printer.conf file that may prevent the print queue from being disabled. I'm hoping that if I change the default value from "stop-printer" to "retry-job" that this will prevent CUPS from disabling the print queue and requirring a cupsenable command to re-enable the queue.
I don't want to play around with scheduling cron jobs to enable the queue.
Ubuntu Installation :: 10.04 - Printer Only Print Jobs In Queue After Restart
Jun 10, 2010My Printer Brother DCP-8045D only prints, when I send the computer (Lenovo X200) to suspend (or shutdown) and wake it up again, whilst a document is in the printer queue.
View 2 Replies View RelatedDebian Configuration :: Print Jobs Disappear From Queue?
Jun 16, 2010I have no idea what's going on. I've had this machine running for over a year, and it's been great. A month or so ago, I realized that jobs weren't going to the printer. When i VNC'd in, I noticed that print jobs would show up in the queue as "Processing" briefly, then disappear.
lsusb:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I've even reinstalled the OS (not just for this reason) to no avail. Printer is dete cted without issue, I just can't use it.
OpenSUSE Hardware :: 11.3 - Print Jobs Just Sits In Queue
Jul 26, 2010I'm running openSUSe 11.3 on a laptop and the printer is connected to my desktop which is running Windows XP. I have the printer and several folders and drives shared. I can see the folders and drivers on my laptop but I cannot get the printer to actually print. It is an HP printer but I am not using HPLIP. I can send a print job to the queue and the printer resets itself like it's going to print but nothing else happens and the print job just sits in the queue until I hit cancel and restart then printer.
View 9 Replies View RelatedSoftware :: Managing Print Jobs Through Printer Queue?
Aug 22, 2010my ERP is sending multiple xml files to my queue and printing daemon reads each files and send it to windows printer (queue) where another software that uses each file and prints one document at a time.I would like to control first part when ERP send XML file I would like printing daemon to send files to windows queue in order the files came in from ERP. Currently it send it in random order. (i think it's based on how fast it can process, size of file..ect)
View 5 Replies View RelatedApplications :: Firefox 3+ Doesn't Queue Lpr Print Jobs Until After Quit On RHEL5/10.04?
Jun 8, 2010We have a lpr server for printing (not CUPS for compatibility with complicated domain/systems). We configured our linux systems -- RHEL4, RHEL5, and Ubuntu 10.04 -- so that lpr is one of the gtk print possiblities by adding 'gtk-print-backends = "lpr,pdf,file"' to gtkrc. This works great for several gtk-enabled applications like Acrobat Reader (acroread).
However, Firefox 3+ (tested 3.6.3 & 3.0.19) doesn't actually queue any lpr jobs until after quitting the application.
General :: Printing From Command Line Won't Work - Just Sits In Print Queue
Apr 3, 2011CUPS was not originally installed on my server, I have installed it but cannot print to my network printer. On my laptop, I can... they are both running the same version of Debian. What could be missing?
Here are some details...
I have two computers running the same version of Debian. One is a server with no GUI and the other is my laptop with GDM installed. My laptop (which prints with no problem) is connected via Wifi. My server is connected directly to the router via Ethernet. I cannot print from the server.
The printer is a Canon Pixma MP495 that connects to the router via Wifi. I have downloaded drivers for the printer from [url] and installed them successfully using dpkg on both computers.
Right now I have a regular text file that I am using for a test page. To print from my laptop (with success) I type:
Code:
This does not work from the server. What could I be missing?
lpq run on server:
Code:
lpinfo readout:
Code:
OpenSUSE Hardware :: Printer Seizes To Function Since 11.4 - "There Is No Print Queue"
Mar 27, 2011Since I changed my System from openSUSE 11.3 x86_64 to openSUSE 11.4 x86_64 my printer (Samsung ML-2850 via USB) seizes to function (clean installation). The printer connects to two machines via a KVM-switch. On the other machine (Windows 7 x64/Windows XP x64) the printer is working fine. This did not change when I switched the Cables/KVM-ports. In addition, when I was using openSUSE 11.3 x86_64 the printer also worked fine. All necessary CUPS-packages are installed:
[code]...
OpenSUSE Hardware :: Parallel Port Printer Configuration On 11.2 64 - "There Is No Print Queue"
Dec 13, 2009I installed SuSE 11.2 64-bit on a new computer without any printer attached. When I read the manual for the mainboard, I discovered to my delight that it actually has a parallel port, it's just not connected. I moved the cable from an old desktop and put it into my new desktop. After enabling the port in the BIOS setup, the Hardware Information dialog in yast correctly shows that I have a HP LaserJet 1100 (/dev/lp2).
How do I configure the printer? "Printer" in yast tells me "There is no print queue". When I click "Add" yast tries to detect a printer and gives up with the message "No connection selected". I can't add a selection, however. "More connections" gives me the exact same error message. The "Connection Wizard" allows me to select "Parallel Port", but then complains about missing connections again. The cups demon is running. I don't have /dev/lp2, is that the problem?
Programming :: Get Length Of Run Queue And Swap Queue?
Nov 3, 2010is it possible to get the length or even the items of both queues, the run queue and the swap queue? I've googled a lot but had no luck. Maybe I havn't used the correct search words...
Is there any header and/or code example to use structures or any API to get these information from the kernel or the scheduler?
Fedora :: F11 Freeze Randomly When It Was Sitting Unused / Solution For It?
May 27, 2010I thought I should share a solution to a freeze issue I was having. Fedora 11 was running well but then started to freeze randomly when it was sitting unused. This could happen multiple times per day. I would have to power off to get it to reboot. Firefox was always open at the time of freezes and I had recently loaded several programs to try and run wmv files....Xine, GStreamer. So, I unloaded the programs. I also went into Firefox options and removed Xine as the default program for opening different types of files. The freeze issue is now cured. I have no idea how this caused the freeze and I never did get wmvs to run but at least the freeze issue seems gone.
View 1 Replies View RelatedFedora :: How To Configure Internet Access If - Sitting Behind Proxy?
Feb 28, 2011I have Fedora running on the comp which is sitting behind proxy, which required username and password to access internet. The username is E-mail address.
I've tried the following to configure internet access:
My question is how can I configure internet access through proxy system wide for all applications and commands?
General :: Identify Which Files/directories Are Sitting On Each Drive?
Feb 5, 2010I have two hard drives, sda and sdb. Windows resides on one and Linux on the other. Before I reinstall Linux from scratch, I want to make sure I know which is which so that I don't end up erasing my windows drive. How can I identify which files/directories are sitting on each drive? I.e. how do I find out the mount points of /dev/sda/ and /dev/sdb/?
View 9 Replies View RelatedGeneral :: Burn A Video-taped Sitting To A DVD Needing Almost 7GB Of Space
Jun 17, 2011I was finally able to upload a video of my uncle speaking about his time on Iwo Jima. The problem is that it uses almost 7 GB of space. When I try to burn a DVD, there is not enough room. I don't know how to "split" it. Is there such a thing as a 7GB DVD? I have looked and only computers pop up when I google it. If not, what can I do?
View 4 Replies View RelatedUbuntu Installation :: Blue Globe (icon) Shiretoko Is Sitting On Desktop After Update Download
Jan 13, 2010Shiretoko?! Blue globe (icon) Shiretoko is sitting on my desktop after today's update download. Not Mozilla Firefox, but bloody Shiretoko!
View 3 Replies View RelatedUbuntu :: Enable A Black Screen Screensaver While The Machine Is Sitting At The Login Screen
Oct 1, 2010Alright guys. I need to find a way to enable a black screen screensaver (or turn off the monitor, or something to avoid burn in) while the machine is sitting at the login screen and completely turn off the ability for the computer to sleep. how I can accomplish that?
View 1 Replies View RelatedGeneral :: Scp Command - Copy File Into Local Computer By Still Sitting In 1st Computer
Jun 17, 2011I am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
Ubuntu :: Printing Corrupted - Get Substituted / Print A Blank Space / Print A Box
Mar 23, 2011Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
Ubuntu :: Cannot Print PDF Files - Print Preview Shows A Blank Page
Jun 5, 2011I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
Ubuntu :: Canon Mp470 Printer - 10.10 - Able To Print Black And White But Unable To Print Photos
Dec 26, 2010My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedUbuntu Networking :: Connected Via Usb File Goes To Print Que But Will Not Print ?
Aug 14, 2010Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies View RelatedSoftware :: CUPS - Print Jobs Shows Completed, But Page Doesn't Print?
Dec 6, 2008I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
Slackware :: CUPS Print Jobs Print 1st Page OK, But All Others Are Overwritten?
Feb 26, 2011Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedGeneral :: Print Multiple Independent Pages In One Print Job?
Mar 23, 2010How can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.
Ubuntu :: Queue Torrents In Transmission?
Jun 1, 2010I recently started using Transmission torrent client. I love it! The light weight and web interface feature is compelling. I am not able to figure out how to queue torrents.
View 3 Replies View Related