General :: Can Copy Entire Partition / Put It On New Drive
Jul 11, 2011
i am putting a larger drive in my laptop, i have linux mint 10 KDE setup with all the software i need and running just the way i like it. is it possible to actually copy the entire partition to a external drive then place the partition back into my laptop with the new drive in it, and still have it all setup the way i had it?
basically so i dont have to reinstall everything and set it up again.if this is possible could you please explain how i can do it in the simpliest terms at all please.
View 6 Replies
ADVERTISEMENT
Jul 7, 2011
I would like to copy the entire file system hierarchy from one drive to another..i.e contents of each directory as well as regular files in Linux platform. Would be gratefull to know the best way to do that with possibly Linuxes in-built functions. The file system is a ext family.
View 3 Replies
View Related
Sep 24, 2010
I would like to copy an entire unmounted partition from one machine to another on my LAN. This is basically to perform a very direct backup of the partition.
View 1 Replies
View Related
Sep 30, 2010
I have an old Dell Dimension 2400 with XP that has a WD 40GB model# WD-XL80SD-2 that has run out of space now matter how hard I try and keep it clean. I called Tigerdirect this morning and ordered a Hitachi 500GB hard drive model# OF10381, here's my dilemma. I really want to just do away the old hard drive and use the new one but it seems as if there's not a real good way to copy the entire hard drive including the OS. I have been told that you can use a program such as norton ghost to do it. I do though have a Windows 7 disc, I am going to use a SATA host PCI card to connect the new HD. if I should back everything up from the old HD except for the OS. And then unplug the old HD and just do a fresh install with the Windows 7 disc.
View 9 Replies
View Related
Jun 8, 2010
I have an 500GB Iomega external drive connected to my iMac and used for the Mac Time Machine back-ups. I want to put a small partition on there that I can use to back-up my Ubuntu files which are on my laptop. I thought that I would be able to just copy the entire Home file on Ubuntu to this drive be drag and drop but this does not work. I get a notice to inform me that I do not have permission to create file there. I can however move files in the other direction (from the external drive to Ubuntu on the laptop. I assume this is because the external drive was formatted for Mac and I hope the problem will be solved if I could format a part of the drive in ext4 to accommodate the linux files.
View 7 Replies
View Related
Sep 27, 2010
I am trying to use the cp command to copy some files around but want to preserve the entire folder structure. Example:
Then within the /backup location I want to see /backup/folder1/folder2/file.
I have tried cp -a and cp -p but neither give me the above.
View 3 Replies
View Related
May 2, 2011
How to Copy the entire folder contents (including sub-folders and their contents) to another folder using PUTTY? Is there any command for that?
View 3 Replies
View Related
Sep 5, 2010
I have a 16GB Ubuntu Webserver running on a Transcend SMART CF chip (Yes I know all the reasons not to). I want to move that entire system (OS, Files and structure) to an external bootable HD that will probably be closer to 100GB. What's the easiest way to do this and have it be plug and play. By which I mean I can then plug the drive into a new system and boot it up just as it was running on the old system.
View 1 Replies
View Related
Jan 9, 2011
I want to copy my ubuntu install to a bigger hard drive, and am not quite sure what to do. According to my google searches, I need to run ubuntu from a live cd, then in a partitioning program copy the ubuntu partition to the new one, then resize it. Is that all? Do I need a linuxswap partition on the new hard drive? I have been using kde partition manager to arrange my new partitions. On one hard drive I have the partition I want to install ubuntu on(what type should this be? ext4?) and a partition to share between ubuntu and windows, and then will use my old ubuntu partition for installing windows xp.
View 2 Replies
View Related
Jan 26, 2011
I just installed a new HD on my system with multiple HD's already. I have a drive with two versions of Ubuntu & would like to copy the complete drive to the new drive along with all the contents & partitions of the Ubuntu drive.
1 - Could I partition the new drive & just copy the contents using rsync?
2 -If I copy all the contents over could I just reinstall Grub & edit fstab & be good to go?
View 3 Replies
View Related
Apr 3, 2010
I am trying to install Gentoo. Currently I have windows 7 on my primary Hard Drive.I decided to add in a second HDD that I got for free and use linux on that.I got through my entire install and at the end I accidently wrote grub to my second hard drive.When I rebooted it went straight to windows.So I have some questions. When installing to the secondary HDD does my boot partition and swap need to be on sda? or can they reside on sdb?Also I tried to re-issue the grub-install command and it said bash: command not found. How can I get grub to re-install? I tried to emerge it and same issue no command found.Do I need to redo the entire reinstall?My last question is If I have more then enough HDD space how much is too much for linux? Most people say 30 GB is all you need from what I have read but I assume 160 GB is going to go to waste?
View 3 Replies
View Related
Jan 16, 2011
I have a very specific issue that I am having trouble resolving. I have an old laptop and a new laptop with a smaller HDD. I want to copy the windows partition from the new lappy to the old bigger HDD so I have room for Ubuntu. All of my files are on a Maverick install on the old lappy. How can I get all my files and windows to the old HDD and into the new laptop. I am a little stuck on this one because of my limited options.
View 8 Replies
View Related
Apr 20, 2011
I run alot of Linux running in memory. Mainly by PXE booting a kernel and the entire OS as the "initrd" file.
I have a RHEL6 image running as a VirtualBox guest and the entire OS (minimal) is contained withing 1GB of disk. I wan't to boot the entire /dev/sda1 "/" (its the only partition on the drive, no swap) as the initrd file and run everything from memory. But grub won't let me. So before I try and re-invent the wheel I thought to post here first.
Details. RHEL 6 as guest in VIrtual BOX. configured with 3Gb memory. HD is single partition and known as /dev/sda1.
at the grub console. I issue
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-19.el6.x86_64 root=/dev/ram0
initrd (hd0,0)
But the grub windows just freezes. Apparently it doesn't like the fact that I've referenced the entire partition (hd0,0) as the initrd. Any thoughts? Or any better boot loader like SYSLINUX?
BTW, I am not worried about the /etc/fstab mentioning /dev/sda1 at this point, I have a fix for that already. I would like to see grub load up the partition as an initrd.
View 1 Replies
View Related
Jan 13, 2010
My Ubuntu 9.10 is intalled on a partition on my computer HDD. The other partition OS is Windows XP. My Windows uses McAfee as the antiviral program. Granted that linux is at a much less risk for viruses, some still apparently can slide through on incoming emails from Windows computers.
1) Will my Windows partition McAfee protect the entire computer?
2) If not, suggestions for an anti-viral program?
View 6 Replies
View Related
May 4, 2011
I got a new hard disk for my laptop and I want to move my Gentoo installation from old HDD to new.
Most simple guides recommend use of dd to copy the whole partition byte by byte.
I'm moving to the new drive because I don't have enough space on the old drive, so I don't want to simply clone the partition. Instead I need the destination partition to be bigger. Would dd work well in that case?
Assuming that I use same partition types on the new drive, would I be able to use simple cp with appropriate settings?
View 1 Replies
View Related
Apr 30, 2011
I have win7 and ubuntu on a 250gb hard drive. I would like to move this to a 1tb drive. Is it possible to clone the entire hard drive, including the MBR? Thought about doing a disk image but unsure if this is the answer. I am using win7 64 pro and ubuntu 10.10.
View 3 Replies
View Related
Jun 8, 2011
I installed a new 11.04 on my Thinkpad in place of the old 10.10 system, so it replaced the old /home with a new empty one. But I had previously done a partition copy of the original 10.10, complete with /home to a spare HDD so now I can copy that /home in place of the new empty /home. What's the best way to do that? Should I use 'dd'? Should I use Nautilus? Or should I partition-copy that copy of the 10.10 onto available space on the thinkpad 11.04, then manipulate the partitions to consolidate? Maybe create a separate /home partition?
View 4 Replies
View Related
Feb 6, 2011
how do you copy an entire line and add that copy at the end of the same line?
For example, sometimes I rename a collection of files with a command like:
"mv oldfilename newfilename;"
I am able to add "mv" at the beginning, the semicolon at the end and sometimes replace a word in the middle, but... how to change a line "oldfilename" into "oldfilename oldfilename"... that is already long time a mystery to me...
View 5 Replies
View Related
May 24, 2010
I have succeeded in deleting my former Windows XP partition and it is now unallocated. How do I allocate all of the space to Ubuntu?
Attached is my Gparted screen. There was an error when booting Ubuntu initially and I was never able to dual boot. XP is gone now. I want Ubuntu to have all the space
View 4 Replies
View Related
Apr 10, 2011
I've searched some older posts and they said to use partimage, but this program doesn't support ext4 file systems. Here's the original post: [URL].. So how would someone backup their entire ext4 partition so the owner can mess around with some graphics drivers
View 3 Replies
View Related
Dec 10, 2010
Now I have learned creating partition in linux (ubuntu), well that's an achievement for a newbie. The next thing that I want to know is, how can I copy the contents of a partition to another partition. Like if I want to backup its content to a new partition that Im going to create.
View 11 Replies
View Related
Jan 26, 2011
I have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
View 9 Replies
View Related
Sep 4, 2009
i've been getting into problems trying to move around my partitions, by copying them to a directory on a partitions with alot of extra space, then mounting then with --bind. i think it's todo with the permissions, like i can run gdm for the gui but i can't login.startx doesn't work though, gives me some errors but i don't know alot about x windows. but like the partitions are mounted, but just the system doesn't work properly with them this way?this is my method
Code:
rsync -aHPvx /usr/ /store/usr_proxy
then in fstab
Code:
/store/usr_proxy /usr ext3 bind,defaults 0 0
View 2 Replies
View Related
May 10, 2011
I would like to install the entire Ubuntu OS to my USB drive. I know persistence works with it fine, so it would be perfect for traveling and on the go operation. The only question that I have has to do with the booting of the OS. Normally, I know I would have to restart the computer and boot from the USB. Then I came across MojoPac, and I think it is a cool idea. It starts up once the USB is plugged in and there is no need to restart. Would it be possible for me to simply plug in the USB on a Windows PC and have Ubuntu run in a similar fashion?
View 8 Replies
View Related
Apr 6, 2011
I am getting a SSD and I'd like it to become my new Linux boot drive. However, it is smaller than my current hard drive's root Linux partition, so I'd like to copy over the filesystem and exclude some directories (which I'll leave on another hard drive). So I can't just clone the partition with parted or similar because it is too big.
I want to make sure all the data, metadata, links and such are preserved. That seems to exclude "cp" because it doesn't preserve all the metadata and link information.
The two basic techniques I've been able to identify seem to be something like:
find / -xdev -print0 | cpio -pa0V /mnt/dst
and:
rsync -avP -H -S --numeric-ids / /mnt/dst
Can anyone chime in with what they've used in the past, whether one of these or a different method, or if they see any flaws in these approaches.
View 2 Replies
View Related
Dec 2, 2010
I installed Debian squeeze to 40Gig pata hdd on my AMD 1090T desktop, with1Tb sata hdd.
Now that I'm quite comfortable with dual-booting, I'd like to transfer 40Gig Hd(sdb) to sda3. I viewed this thread, which is similar to my situation, but not quite the formula.
[URL]
I intend on reading more on this 1 to see if what I'm looking for is include.
[URL]
I've never done the dd command, so it's not like I'm going to do it today, but would like a little bit more documentation to get a further understanding of the dd command.
View 14 Replies
View Related
Mar 19, 2010
Trying to copy ISO images over to a external hard drive, when copying it reaches 4GB then stops.I have tried the same with a external usb thumb drive as well and the same thing happens so it is not the external drives running out of space. The error reads.Error Writing to file is to large.
View 9 Replies
View Related
Jan 6, 2011
I recently installed Linux to run a few Linux based tools on a disk images I have, and I can't seem to copy the disk image over to my ext3 partition.
The particular distibution I'm using is BackTrack 4 r2, which is Ubuntu based. I can't seem to find specifically which version of Ubuntu is being used. The disk image is 108GB. It is currently located on a NTFS partition on a SATA hard drive connected directly to the computer. The ext3 partition is located on a second SATA hard drive connected to the same computer. It has 200GB total. I do not remember exactly how much free space it had but "df -h" showed a lot more than 108GB. The computer has 4GB of RAM and I gave it 8GB of swap space.
At this point it has been running for more than 12 hours. This is far longer than I would expect it to take had I been copying the file under Windows. How ever I do not have much experience with Linux, so if it's supose to take this long please let me know. I am planning on letting it run until I wake up tomorrow.
"cp -v" hasn't been very verbose at all. The only sign I have that indicates the computer is still trying to do something is the HDD light on my chasis that has stayed lit this whole time.
View 4 Replies
View Related
Aug 26, 2010
i m not able to copy a file over 16 gigs on an EXT2 or EXT3 partition. Is there a way to do this. I even tried to split my iso file too. I splitted my iso file in 4 files then copy them on the ext2 or ext3 partition. But as soon as I was trying to join the files together it never went over 16 gigs. Actually it stops at 16,843,020 kb exactly. is there a limit for those partitions or is there an another way to see my 20gigs iso file in one piece?
View 1 Replies
View Related
Mar 26, 2011
I am installing openSUSE 11.4 on a Dell D620 on which I used to have Ubuntu/XP dual boot. I don't want Windows at all anymore and on the new openSUSE install I just want swap, root, and home partitions.The installation goes fine, but it says my drive is 465 GB not 500, I think what is not showing is my old Windows System partition. I can't see away from within openSUSE to increase the size of my home partition after the install either.With my limited linux skills I think the simplest solution would be to just format the whole drive then install openSUSE. I tried to do that with some XP CDs, but none of them will boot, they keep listing various errors. I tried putting the drive in an external holder to plug it into another computer and format it just using windows, but windows won't recognize it.Using some free live cd/USB I don't know about
Using some setting in the openSUSE installation menus I don't know aboutUsing windows or a windows CD (I can post the boot errors if needed)
View 1 Replies
View Related
