Ubuntu :: Poor Desktop Performance With NVidia And Four Monitors?
Dec 20, 2010
I experience very poor desktop performance on my system. General clicking responsiveness is poor, taking over second or two to focus to a new window, move windows around, ... etc. The Xorg process constantly uses over 60% of the CPU even when I'm doing nothing, and when I do click around it will quickly go up near 100% usage. Performance is initially OK when I first launch into my Gnome environment, but it soon deteriorates within 30 minutes or so. Eventually, after days of being up and running, my desktop will crash.I am running Ubuntu 10.10 with latest upgrades. I have four monitors attached to my "nVidia Corporation G98 [Quadro NVS 420]" graphics card. I am running the "NVIDIA accelerated graphics driver (version current)" recommended in the Ubuntu "Additional Drivers" app. I get a fair number (hundreds) of these in my /var/log/Xorg.0.log:
though they don't appear constantly while my desktop is running (I assume they may come in batches?). Not sure if they're relevant. A separate issue, though possibly related, is the SpeedCrunch app (a desktop calculator) is guaranteed to crash my desktop as soon as it gets focus. Here's the relevant output of "lspci -v" which shows my graphics card:
Code:
03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for Quadro Plex S4 / Tesla S870 / Tesla S1070 / Tesla S2050 (rev a3) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=03, secondary=04, subordinate=06, sec-latency=0
i'm trying to run ubuntu 8.10 intrepid ibex on an old hand-me-down laptop that i got from a family member, and i've noticed that the performance is actually much worse than it was on windows xp professional (32-bit).
first of all let me give you my specs: ibm thinkpad r32 intel mobile pentium 4-m 2.0 ghz ati radeon mobility m6 (i think this is actually the mobility radeon 7000 igp) with 16mb ram 256 mb ram (pc-2100)
i understand that these are very low performance specs, but it feels like the computer is running very sluggishly even for those specs. the computer ran just fine in windows xp, but is extremely sluggish in ubuntu. it seems like it detected all the hardware just fine, but i feel like it may not be utilizing the cpu and/or video to the extent that it should be. a couple of places where it really seems to struggle is when first opening new programs, viewing flash intensive web 2.0 type webpages (i.e. videos), and listening to music/podcasts (with rhythmbox).
it seems like rhythmbox really kills my performance more than anything else, but the performance is poor all around compared to xp, and i feel like that shouldn't be the case. like i said, i understand that the specs are poor, but it feels like it's not even living up to those specs. i know that 8.10 is old and outdated now, but it's what i had laying around and i figured that it might perform better on this old deprecated laptop than 9.10 would anyway. am i wrong in this assumption? would 9.10 perform better for me?
I am running karmic and have wireless performance which is terrible on the EEE 1000HA I see it as low as 1mbit at times and others at 24mbit and briefly at 48 and 54mbits. running an Internet speed test with wireless I get pathetic speeds as low as 15Kbps, Its 5 feet from the wireless router ... and other machines that are wireless in the same area show 54mbits and perform great ... any one solve this problem with the asus EEE1000HA running on karmic?
I just installed Ubuntu 10.04 on a laptop that was given to me. It is having a lot of lag issues,especially when playing videos and visiting websites using flash. It's an Intel Pentium 4 2.4GHz machine. I think that it should perform better because I had used and AMD Sempron 2.0GHz machine with Ubuntu before and video playback was much better than this. I'm thinking that my problem is the graphics card driver. Here is the card that this machine has:
Code: :~$ lspci | grep Radeon 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M The AMD machine was using a VIA graphics chipset.
I used the command "Xorg -configure" to create a xorg.conf file, hoping that might help. But it didn't. Here it is:
Is there any tweaking that I can do in the xorg.conf that might help? I don't know which of those options I should set. I also tried changing the driver to "ati" but that did nothing. found some info for settings with "man radeon", I'm going to try some of those out.
I have an ATI RADEON 7000 (taken from lspci) 64 MB graphics card. My computer has a 700 MHz Celeron CPU and 650 MB RAM with Ubuntu 10.04. Anything graphical is slow. I cannot even play basic games like SuperTux. I think it is a graphics driver problem. Will this card ever work well with Linux, what do I need to do?
I am installing Red Hat Linux enterprise 5.0 on HP proliant ML 110 G5 with X3330, 8 Gb 2 X 250gb SATA Config. Time required for full istallation is around 2hours 30 minutes. What could be the reason?
I just installed CentOS 5.4 on a brand new DL160 G6. In order to get the data raided I decided to go with mdraid. But I see quite harsh performance hits, I have no GUI or anything and just the basic server installation, and even the console feels sluggish.
The output from getinfo.sh disk:
==================== BEGIN uname -rmi ==================== 2.6.18-164.15.1.el5 x86_64 x86_64 ==================== END uname -rmi ====================
So for the last, oh, three or four hours now, I've been trying to get videos to play properly in Ubuntu. I have the default player, I have vlc, I (apparently) installed mplayer, but it won't play anything at all.
I was having horrible screen tearing with standard definition .avi's in vlc, fixed that by setting vsync in catalyst control center to always on or whatever it is.
Now, I have tried to run a 720p x264 video. It PLAYS, but not well. Audio is fine, however video is all jerky in VLC, and in Totem it's just a mess of screen tearing (although the video does no jerk on that player).
I have just spent HOURS trying to get VIDEOS TO PLAY. This makes no sense. Playing a video should be the simplest thing in the world for any OS to do, but with Ubuntu it is like pulling teeth. I have NEVER been so frustrated while using a computer. What is going on here?
BTW, I installed every single thing needed to use mplayer but it still does not work. The player comes up but will not play any type of file.
My system specs: 2.2Ghz dual core (intel) 3gb ram 1GB radeon hd 4650 vid card asus ipibl-lb mobo
I was really enjoying Ubuntu until I got around to trying to watch some videos. Now I am maybe minutes away from going back to vista. At least on there I can watch full 1080p videos if I want with no problems.
I am running kubuntu 9.10 on a dell inspiron 14 with an intel GM45 graphics card. When I run 3d games like Nexuiz, openarena and tremulous I get really random performance. Sometimes things are totally playable with somewhere between 50-80 fps and other times I get maybe 4 fps and everything takes forever to load. These effects persists between logouts, X restarts and reboots! I get no errors when I run things in console either.I never really play games much but when something doesn't work...
iwconfig shows that the bit rate is 130Mb/s and link quality is 98/100. I'm using the wcid network manager instead of defaul gnome one. I'm getting lots of packet loss and performance is very bad. The connection is practically unusable. I've tried installing the compat wireless backport package but that did not work at all.
ok, we had to move one of our databases due to failing hardware. This box is newer than the old but it's just dog slow. 1st I thought it was mysql but now I am realizing it's the network. As a test, I tried copying a remote file to that box and the old server (located at the same co-lo, same provider), same switch, etc.Here are the results;
Old server: access_log.1 100% 4192KB 1.4MB/s 00:03
New Server: access_log.1 100% 4192KB 72.3KB/s 00:58
So now I see why people were complaining about webpage load times, etc. I can't figure out why the network latency. I looked around a bit, see below for some things, I thought mtu, nic speed, etc.
mii-tool shows; eth0: 100 Mbit, full duplex, link ok eth1: 100 Mbit, full duplex, link ok[code].....
Are there other things I can type to test or provide more feedback somehow to get more information.
I've just removed fedora 10 and installed CentOS 5.4 both x86_56 on my Lenovo ThinkCentre 9091-CTO workstation, and observed serious performance degradation while intensive I/O operations and huge load without significant CPU consumption in user mode with about 50% in I/o wait.For example if I do the "tar xjvf some_large_tar.bz" file and run vmstat i get the output below. This is the only cpu and io intensive process running. The load gets up to 6 on C2D CPU and the machine has unacceptable responsivness.
[root@f00 ~]# vmstat 5 10 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st
I have an ATI Radeon x1300 graphic card on an Intel platform.Since the last reinstall my Debian Squeeze system shows very poor performance in glxgears,only 80-90 FPS. Last time I had a problem the kms setting in the kernel. I disabled the modding setting in GRUB and then glxgears showed about 900-1300 FPS. Now,the problem is back, even though I made the same setting in the boot loader.
i had recently loaded squeeze and had an issue with the 2d performance.i.e when being prompted for the root password, the shading slowly draws down the screen several times before stopping at the final darker shade. i then added the linux-firmware-nonfree package. all worked extremely well, even compiz, but i don't really care about compiz. i just loaded it to see how it performed. i then distro-hopped a bit and when i came back to squeeze the first thing i did was add the package, but the video is acting like i haven't added the package. i've searched for an answer, but have not found anything recent to indicate if xorg was upgraded or what.stable lenny works fine, but i'd rather have the nice console fonts when not in x and more up to date apps like gimp and xsane in squeeze.
I installed on a Intel SR2612UR Server with integrated LSI Expander and a Adaptec 5805Z controller a Raid 6 Array with 12x 2TB Drives (2 ext4 Partition: 16TB, 2TB), but I get very poor read speed depending on the blocksize that I set it vary between 130 MB/s and maximally 170 MB/s which is really poor for a Raid 6 Array of 12 drives, on a similar Dell Server I get above 650 MB/s. The Adaptec Controller has the latest Firmware installed.
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
Like the title says, I have the Quadro NVS 135M in my Dell D630. It's working (well, besides the startup screen issue - Plymoth... not a fan!), but when I watch a movie the image ?flickers? annoyingly. This is something I have never experienced before, with allegedly ?inferior? video cards. It's odd though, isn't it - better video card, inferior output!?!
I have a HP dv6314tx laptop with Nvidia Geforce Go 7400 graphics card. Recently I installed 10.04. Without installing any nvidia drivers my boot screen resolution and desktop resolution were fine. But I cudn't activate Extra Visual effects and so I installed nvidia drivers. Now the problem is that Extra visual effects work just fine. But during the boot, the splash screen has a very poor resolution.
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
I'm running a lenovo laptop with an nVidia Quadro FX 570M and Ubuntu 9.10.
I cannot get my external monitor to work properly for me (using nvidia-settings). It basically creates a single continuous monitor space across both the external and the inbuilt monitor (maximising a window, covers BOTH monitors and the gnomepanels run across both monitors)
I think its related to my xorg.conf settings, which are as following, Can any one help: (It used to work for me when I was using ubuntu 8.4)
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?
I have been playing around a bit today and decided to hook my tv up to my slack box. I have an NVIDIA gt220 using the proprietary drivers which supports multiple monitors and I can get various setups like an extended desktop and xinerama, but what I can not seem to do, and what I'd actually like to do, is just have both the monitor and the TV display the same images. If it would work better/easier I also have a second NVIDIA card, although it is a different model. I haven't bothered trying that yet as it seems like it would be easier to configure one card instead of two.
I'm using a NVIDIA 9600M GT on my laptop running Ubuntu 10.10. The laptop has a 16:10 display, I also connected my 16:9 LCD TV via HDMI. I would like to use them as clones. The problem is, as my TV has a different aspect ratio than my laptop display, the image does not fully fit on the TV. For example, when using a resolution of 1280x800 (16:10), one tenth of the width of that image is missing on my TV, as it has an aspect ratio of 16:9.
In Windows, the NVIDIA software stretches the image so that it appears a little distorted on my TV, but at least I see everything. Is it possible to do that in Ubuntu?
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs) x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
I am currently running 11.04 on my desktop replacing laptop. It has nvidia gtx460 graphics and I'm using the suggested nvidia propietary driver. I was trying out Unity, I didn't like it too much, so I switched to Ubuntu Classic. However, I feel the performance is rather sluggish, in matters such as moving windows and such. For example, even Docky is not fluently moved upon. I wonder whether I should turn some shaders off or what to do. I chose Ubuntu (no effects) with the thought of turning on only the effects I use, such as Desktop Cube, but it doesn't seem to work here (it does in Classic, though it only has 2 desktops there, so it's more of a Rotate Plane). Have any af you had these issues ?
I need a seperate workspace on each monitor and I use nvidia propriatary graphics drivers (I have a Geforce 9500 GT Graphics Card. It has one dvi port and one vga using both for my monitors.) The only problem is whenever I try to save the settings I apply something like twinview or the seperate x workspaces with the second monitor enabled It applys it but this is what happens in sequence (It may be only twinview that does this but i'm not sure not at my home computer right now):
1.) Picture cuts out to a blank screen on main monitor 2.) Pictures turns on in the second monitor (Its a seperate workspace from the main monitor) 3.) 3 to 5 seconds later the picute cuts out to the second monitor 4.) I'm left with two blank screen monitors and no way to turn the GUI back on other than a complete restart of the computer.
I need help on both of these issues. If it helps any one monitor is a CRT (The one on the right) and the one on the left is an LCD (The LCD is the main one). I also have Ubuntu 9.10 32 bit Karmic Koala if that helps. Lastly I have the latest propriatary graphics driver from nvidia (185 I think.) I also installed the driver from nvidia via Jockey (I think thats the name of the default driver installer for ubuntu..?) That is my situation and as you can tell its a pretty complicated one.
I have dual monitors running successfully with my BFG GeForce 8400GS and NVIDIA X server settings. The only problem is every time I restart, the settings go back to default, so I have to setup the dual monitors again.
