I use jaunty, and everytime i start pidgim it crashes not error message shown, i removed it and installed it again, no sucess. I guess it must be dropping error messages somewhere. Can someone help or provide me where should i be looking for the error messages, i went to system log but could not find it. I tried dmsg | tail , post the crash, did not see anything.
View 3 RepliesI don't use F-spot regularly. I don't think I've used it for a few months. But when I tried to open it recently and every time since it crashes showing the following error: F-Spot Encountered a Fatal Error
Could not read add-in description.I removed F-Spot and reinstalled in Synaptic but it didn't fix anything.
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
I just reinstalled Ubuntu Lucid Lynx and an old problem has come back. For some reason I couldn't fix it even in my previous installation. The problem is the top gnome panel. See the photo below: As you can see, the network icon is not shown properly while the Me menu is being shown twice. I can't even restart or log out or shut down at this situation without pressing the keystroke to turn the power off.
View 9 Replies View RelatedHi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies View RelatedIm trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedI would like to install pymedia on my ubuntu 9.10 karmic distribution, but I am having a bit of a hard time doing that.I managed to install all the libraries (lame, libogg, libvorbis etc.) but when trying to run 'python setup.py build' I get an error (Shown at the end).I found on the interwebs that it may have to do with the version of gcc c++ compiler running (currently gcc-4.4) and that it only works with gcc-3.x. Therefore I downloaded gcc-3.4 (from the old jaunty archive), and with this one still no joy.NebelhomP.S. I am not a complete newcomer to linux and python but I am not an expert so it may happen that I ask questions with a very obvious answer.
Code:
nebelhom@nebelhom-desktop:~/pymedia-1.3.7.3$ python setup.py build
Using UNIX configuration...
[code].....
I created a quick makefile with the following lines:
Code:
$(BINARY):
echo "----- Linking $(BINARY)----"
gcc -m32 -g src/* -Iinclude -I$(HOME)/include -I$(HOME)/include2 -D_LINUX -DSYSV -DPOSIX -L$(HOME)/shared/lib32 -lidlib -lid2lib -o bin/sampleapp
echo "---- done ----"
It builds fine when I build from the command line ( make -f sample.mk).
However, it does not build when building from eclipse (which essentially calling the same makefile). The make output shows exactly the same as what I got from the command line build, except the last line showing
Code:
collect2: cannot find 'ld'
make: *** [sampleapp] Error 1
I am not sure why it tries to call "ld" when building from eclipse.
#!/bin/sh
trap "echo Haha" SIGUSER1
echo "asit"
count=1
while [ $count -le 10 ]
do
echo "Loop #$count"
sleep 10
count=$[ $count + 1 ]
done
echo "This is the end"
Why this is showing following error?
trap: 3: SIGUSER1: bad trap
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies View Related[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View RelatedI have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies View RelatedI am using debian testing on my office pc, but i need to access it's desktop from time to time. So i need No machine/teamviewer software that can provide me with possibility to interact my desktop. The problem is, that i want to run shadowed session type, because teamviewer is not good for me. So, when i run no machine in shadowed mode, it crashes with message "The connection with remote server was shut down, please check your network settings and try again." The log is here:
[Code]....
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies View RelatedWhen I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedGreetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedSomething go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
My desktop has been running 64 bit 9.10 since an upgrade from 9.04 for 6 months with no problems.
Recently however, my system crashed for the first time. All windows closed and the system hung, attempting to open anything did not work. I would click on an icon or type Alt +F2 and nothing happened . Although my cairo-dock at the bottom of the screen was still running perfectly (including animations Etc.) albeit without any programs working. Trying to click on system manager gave me the message.
"Failed to execute child process 'gnome-system-manager' Input/Output Error"
Trying to reboot several times and selecting previous kernels brought me to a prompt where I was able to check all my important documents were still there, but do nothing else. Recovery mode also did not work.
Eventually I left the computer overnight and started it and Ubuntu loaded normally, then after around 15 minutes the system hung again with identical systems to the first time. Although this time Firefox greyed out first.
This has happened every time I try to boot the computer since and last time it gave me a screen saying Grub Read Error which after 3 reboots has finally allowed me to access my computer (from where I am typing with haste!).
Using lm-sensors I am sure there is not an over heating problem. Am I right in thinking this may be a problem with my hard drive? And if so what is my best course of action? Apologies for the length of this post and thanks for reading.
I am using Ubuntu 10.10 and currently have OpenJDK java 6 installed. I am trying to run a program called BioLayout Express3D which I am using for my genetics honours project however each time I launch it it loads but immediatelly crashes with the error
[Code]....
I have just changed something in preferences for Skins. Then I restarted my vlc media player and now I cant run vlc! I removed and reinstalled vlc Thousand times but it didn't work! When I type vlc in Terminal :
exc3llent@exc3llent:~$ vlc
VLC media player 1.1.5 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
Blocked: call to unsetenv("DBUS_ACTIVATION_BUS_TYPE")
Blocked: call to setlocale(6, "")
Blocked: call to sigaction(17, 0xb752a0d4, 0xb752a04
Warning: call to signal(13, 0x1)
Warning: call to signal(13, 0x1)
Warning: call to srand(1289860942)
Warning: call to rand()
Blocked: call to setlocale(6, "")
(process:13965): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
Warning: call to signal(13, 0x1)
Warning: call to signal(13, 0x1)
[0x86ee1b4] vcdx access error: fread (): Is a directory
[0x85a4aac] xml xml error: XML parser error (line 2) : Validation failed: no DTD found !
[0x858db84] skins2 interface error: no skins found : exiting
Blocked: call to sigaction(17, 0xbfbfb4d8, 0xbfbfb44c)
Blocked: call to sigaction(17, 0xbfbfb44c, (nil))
Xorg seems to crash randomly and with no real reason. Once it does, I can't restart it. If I try to restart it with GDM, nothing will happen. However once it crashes, Ubuntu's low graphics mode window pops up. Telling it to reconfigure the xorg config seems to do nothing for my problem. I will still crash after words.
Right now I'm running in an earlier kernel, hoping this will keep it from crasgubg
Here is my xorg log. code...
My desktop decided one day to simply die and not start, whenever I log-in, KDE starts loading then promptly crashes and falls back to login screen. I was unable to find anything useful in logs, but I installed Xfce which runs ok. However when I start any KDE app under it, it crashes with a message:
Code:
<unknown program name>(23097)/: Communication problem with "dolphin", it probably crashed.
Error message was: "org.freedesktop.DBus.Error.ServiceUnknown" : " "The name org.kde.dolphin was not provided by any .service files" ".
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View Relatedwhen I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies View RelatedI am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
View 8 Replies View RelatedI just installed the new LTS version but it crashes sometimes an gives the error end_request: i/o error, dev sda, sector XXXX in terminal My PC was working just fine when I was under Karmic. I think it's a bug....
I run Ubuntu 64 bit on my Pentium D820 machine:
HD: Maxtor PATA 160Gb
MB: MSI 7387
GC: MSI TD256E (RX550)
I'm trying to run a simple program in Ubuntu OS, Netbeans application but I cannot resolve the error message. Can someone please assist.
/usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/bee/NetBeansProjects/HelloWorld2'
/usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/helloworld2
[code]....
Downloaded the 64 bit console only package, attempted to run and got this error message:truecrypt: error while loading shared libraries: libfuse.so.2: cannot open shared object file: No such file or directory
View 6 Replies View Related