I made a windows 7 virtual machine.But graphics run like crap.I need to install my motherboard's driver on that virtual machine.But since the virtual machine was created from an iso which was sorted into the CD/DVD device as an iso image; whenever I open the CD device from the virtual machine; it runs the win7 installer.So basically I need one of two things:The virtual machine to recognize if I insert a CD on my CD/DVD hardware. Or to record the .iso image from my motherboard's cd (Which I don't know how to do so)And sort it into the CD/DVD zone of the VirtualBox.I need to install it because I can't even play chesstitans on there. It prompts me some window that tells me that I need Direct3D so basically I need to configure my [attached] graphic card which is pretty good it can run pretty well I just need to configure the motherboard's drivers or something
Hope it's my graphics too, but things go too slow when the virtual machine is up. I probably need more ram or configure the virtual machine to use my rams instead of my hard disk, I'm not even sure if it's using the hard disk or not but I guess so cause everything goes really slow in there. Well not slow as fuq but mmm mouse freezes and teleports suddenly a lilbit. Anyways if you lead me to fix my Ram's usage and setting up my motherboard's drivers on this virtual machine i'm pretty sure it's gonna work.I think it's important to say ubuntu is x64 and win7 is x64 actually my processor is a dual core so the architecture supports it but I don't know if i'm actually asking it to go on x128.
needing to open a port in ubuntu, then use it for my VirtualBox Pc.My VirtualBox is running - Windows XP I have a router connected to my network - Linksys WRT54G Now lets begin, I have tried opening via there router homepage. But when I go to [URL] and test port 4900 is still says that it is closed.
I am using opensuse 11.1.I have installed virtualbox in my machine.The problem is that when i am running it doesn't open.Do you know why it doesn't work?
However, I do not consider myself a Linux pro - I hardly ever use the command line etc.
I have been using the Free personal version of VirtualBox for about 3 or 4 years and have had no problems in any version of OpenSuse (at least none that were not easily fixed). I upgraded to OpenSuse 11.4 several weeks ago and cannot get Virtualbox to work. I have tried installing from the opensuse 11.4 package on the VBox site and I have run their generic command line installer and either way I am unable to open my VMs.
When I used their generic installer I got the following errors: linux-evl8:/home/frank/Downloads/VBox # ./VirtualBox-4.0.8-71778-Linux_amd64.run Verifying archive integrity... All good. Uncompressing VirtualBox for Linux installation........... VirtualBox Version 4.0.8 r71778 (2011-05-16T17:05:29Z) installer
[Code]....
I did a reinstall of OpenSuse for several reasons and it is working great in everyway except I am still having this issue and at this point I am lost as to what to do next.
Currently i have a dual boot on my laptop of fedora and vista. Is there a way that i can use virtualbox to open my windows partion while using fedora? I understand that virtual box makes a "partition" on my fedora partion and runs of that. It would be pretty awesome if i could open my windows partion while using fedora.
So, i've rebuilded all VirtualBox dependencies with safe flags, then i've recompiled most of the sys-* packages also with safe flags. However VirtualBox still doesn't work.
UPD: virtualbox-bin-3.1.4
UPD2: 3.1.6 and ose-versions crashes with same errors
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
Observed on two host systems both with openSUSE 11.3 32 bit using ext4: When a big files, in this case a 1.2 GB and a 1.7 GB is copied from DVD, usb harddrive or shared folder into a Windows 7 32 bit guest system, the copied file is corrupted. The md5sum has changed and until the guest system has been rebooted successive md5sum tests on the same file comes up with various results... After a reboot md5sum tests show consistent results, but a sum different from the original file.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
Server - Ubuntu 10.04.1 lts Client - Kubuntu 10.10
When I try to open any nfs-mounted file using OpenOffice, I get a pop-up window titled "Document in Use". The text of the message is:
"Document file 'abcde.odt' is locked for editing by:
Unknown User
Open document read-only or open a copy of the document for editing." I then have three options - <Open Read-Only>, <Open Copy>, & <Cancel> If I cp any of these files from the mounted directory to my home dir (not mounted), I can open them without problem.Also, my firefox & thunderbird date are in this mounted directory as well (sym links to ~dan/.mozilla & ~dan/.thunderbird). Both of these apps hang when trying to open, leaving two processes behind that need to be manually killed. Again, cp'ing the data out of the nfs-mounted dir onto a local dir resolves the issue, so I am 100% confident there is nothing missing or corrupted in the firefox &/or thunderbird data...
relevant entry in /etc/fstab: server:/nfs/dan/Documents /home/dan/Documents nfs defaults 0 0 relevant entry in server's /etc/exports: /nfs/dan/Documents client(rw)
I don't know if I'm doing something wrong but I've been running Ubuntu or a variant for about a year now and suddenly every now and then one or two of my documents (open office or pdfs) have no information and they won't open.
I'm having sporadic issues with the openoffice.org program. Sometimes, power point presentations will crash the program and then I can't open any open office programs without rebooting the computer. The problem seems to be just with powerpoint files and I'm not sure what the issue could be.
So when I click Places in the Main Menu and then any directory like Desktop or Documents or Pictures the Movie Player starts, and all the files that the directory contains are in the playlist. The only way around is to click Computer which would bring me into the file manager as normal.
I have a problem that I can't seem to figure out. I can easily create a .sh file that will execute a command in Terminal, but as soon as it executes the terminal disappears. How do I get it to stay? My idea is to have the keyboard shortcut "ctrl+alt+del" open a .sh file with the contents "ps ax". Then it would be just like having a task manager; the terminal would open with "ps ax" already executed, and all I would have to do is kill the process number.
I've been using Tomboy Notes on Mac and, when I recently came over to Ubuntu, was thrilled that I could use it still. However, it quit working. I cannot open it in the Applications Menu, I can't open it via terminal (this is what I get if I try:
brasel@sonny:~$ tomboy -new note (/usr/lib/tomboy/Tomboy.exe:7009): GLib-WARNING **: g_set_prgname() called multiple times /usr/share/themes/Human/gtk-2.0/gtkrc:85: Murrine configuration option "gradients" is no longer supported and will be ignored.
[code]....
I can't open it at all.I don't have a .tomboy file in my /home directory, or in my /home/brasel directory. I've uninstalled and reinstalled, I even cleaned out my computer via the computer janitor and it still wouldn't re-install and run.
When I open an open office document from an NFS share it always opens as readonly. This was a problem I had on Arch linux and the fix was to change the locking options in the soffice script but I've tried that fix here and it doesn't work. I've seen a lot of discussions but they all go back to changing the locking options in soffice, has anyone got any alternative fixes or one that definitely works with locking?
I have a while(1) loop, and the error is: glibtop: open (/proc/stat): Too many open files This error occurs after about a half hour to an hour of running. I've tried running this multiple times, both with using glib_close() at the end of the loop, using glib_init() and glib_close() at beginning/end, and just using glib_init(). The strange thing is these have no effect on the actual glib_get functions.
I have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
I installed Open Office 4 on Debian 8 but when I run the program I get this error message.
root@localhost:/home/paul# openoffice4 No protocol specified No protocol specified /opt/openoffice4/program/soffice.bin X11 error: Can't open display: Set DISPLAY environment variable, use -display option or check permissions of your X-Server (See "man X" resp. "man xhost" for details)
Open Office works fine when I run the command "startx" in the Konsole but so far I haven't been able to configure it.
What i am i doing wrong? i download these very good app's from yast and at times i run into a problem when you click on the app and it looks like it wants to open,the application's icon is on the bottom panel and the icon is bouncing up and down where there cursor is and then eventually it disappears.Is it timing out?
I cant open xls files in a shared folder using open office 3.1. Its all started when i install a new open office version. when im using open office 3.0.8 i can open all the files but now i cant even open it. Its always display untitled documents.
Dear experts,I have a question about open() function of gcc3.4.6.I write a example:
Code: using namespace std; #include<iostream> #include<fstream> int main() { [Code].....
It can be compiled and ran.The statement file=txt_stream_file is in order to change char* to const char*. But open() function is not work,and out: can not open plots/results.txt The open() function of gcc3.4.6 is:
Ok For some reason I open my ports in security and firewall. I open ssh and other ports and port 7001 for example but when I go to check to see if they are open or try to connect to them. It shows that they are still closed. I am using - [URL] Also yes my ports are open on my router. I know my router works fine with opening ports because I have shoutcast setup on another computer with xp that is currently running. I am willing to pay for who can ever get this fixed for me...
As of this morning I cannot open pdf's by clicking on them in firefox. I can download them and open them from the download window or even from the folder they are saved to, but not from the browser. Evince opens and says: Unable to open document Error opening file: No such file or directory.
We have a digital signage appliance built on SUSE 11.3 with a LAMP server that uses the flashplayer application to play a .swf file from localhost. It is a AOpen GP7A mini pc that has the nVidia drivers loaded. We have lots of customers that have been running the exact same system for over 6 months (we image the drive for each sale).
For some reason, my last customer is seeing the following problem shown below, and this linux configuration is way over my head. Everything else is working (local LAMP server is working, communicating with our production servers to get information works, etc). I have verified that it is screen 0 that is running (at least it shows with Ctrl-Alt-F7). I thought that it may have occurred because of updating the software with zypper up. I had the customer rebuild from the image being careful not to upgrade the software. The result was the same. The pc is a newer version compared to my bench pc, but there are multiple other customers running that same version just fine. So I am not sure if it is
The command is issued by a php script that is run in a root cron job. As I said, it works great on all other customer pc's including my bench system. I also tried to execute the command on a ssh terminal as the root user with the same result. I also upgraded my bench pc and it still worked properly.
The command being executed is sudo env DISPLAY=:0 XAUTHORITY=/home/svision/.Xauthority flashplayer http://localhost/flash/sign.swf &
the result (when run in terminal) is: No protocol specified (flashplayer:15077): Gtk-WARNING **: cannot open display: :0
I have Ubuntu 10.10. I have installed VLC video player. When I go to places, and then hit Documents, or(music, pictures, downloads). It will open the VLC player with a pop up error.
Error Message when I hit Documents: No suitable decoder module: VLC does not support the audio or video format "undf". Unfortunately there is no way for you to fix this.
Error Message when I hit pictures: No suitable decoder module: VLC does not support the audio or video format "undf". Unfortunately there is no way for you to fix this.
No error message when I hit music: But it open's up the same song all the time.
No error message when I hit video: I just opens up like it's suppose to!
I was trying to make it my default player. All I did was right mouse click on my folders, but I remember selecting anything!
When I un-install VLC player everything works fine.
