when registering my account online (I use Ubuntu 10.4), I for some reason did not get the "Confirm Computer Access" screen (no, I did not overlook it!).In the Ubuntu One client, my machine is listed as <local computer>, and I cannot figure out how to add this computer to my existing account now.
View 9 Replies
After updating to ubuntu 11.04 I have a problem with one of my existing user-accounts. When l log into the "ubuntu"-session I can not see the top panel and the launcher. But when I click, e.g. left where I would expect the launcher, an application e.g. LibreOffice is started. So unity is there but invisible. Other and new user accounts do not have this problem. Does anybody know how to fix this? - I already tried "unity --reset" but nothing changed.
View 1 Replies View RelatedI have an existing Dell Precision 690 workstation setup to dual boot Windows XP and CentOS 5.5. These operating systems are installed on two separate drives. I have a grub menu on the Linux drive with it set as drive 1 and points to the windows boot info on drive 2.I tried taking the linux drive and installing it in a new HP Z800 workstation to see if I could be lucky enough to get it to boot, but it didn't. Immediately after it starts to boot I get a few errors.Here is what the system shows:Right after this message "Red Hat nash version 5.1.19.6 starting" I get the following lines:
"Unable to access resume device (LABEL=SWAP-sda2)
mount: could not find filesystem '/dev/root'
setuproot: moving /dev failed: No such file or directory
[code]...
I've finally got all my accounts the way I like them in Thunderbird. I'm using IMAP and so don't have to move the emails, but how do I migrate my account settings to my other computers? The other machines are running WinXP.
View 4 Replies View RelatedI have set samba shared folders on my ubuntu 10.04, which Windows users on my network use. The problem is, even that I leave the computer on, they cannot access the shared folders until I login with my account to the computer.This is a real problem since I either need to come to the office, login with NX or tell them the password which I don't want to do
View 5 Replies View RelatedI spill my soda on my keyboard and ended up in a 4 day war with my pc.Now my tab, capslock, left shift, and down vol no longer works. I'm going to take it into the shop in the next couple of days to probably replace the keyboard. (If only lenovo kept the easy access keyboards like ibm had on the thinkpads). Something tells me that they will want to log in and test out the keyboard. So I created a guest account with a simple password. I changed my normal user home dir to 770 permissions and changed guest's shell to /bin/rbash. (both found in other posts.) Is there anything else I should do to secure the computer while it is in the shop?[I use su, sudo isn't configured to work (its a dependency so I can't uninstall)]. I have a pretty decent root password.
View 10 Replies View RelatedI want to create an unprivileged user account, say 'shutdown', which can be used only to shutdown the system. I followed the instructions in ut when I login into the system, I get this error 'Cannot execute /usr/bin/sudo /sbin/shutdown -h now: No such file or directory'.These are the configurations that I did
/etc/sudoers:
Code:
shutdown localhost=/sbin/shutdown -h now
[code]...
Sending computer runs linux. Recieving runs OS X.
View 2 Replies View RelatedI have an existing unix user that some how didnt make it into the copy over to our LDAP server. How do I add an existing unix user to an existing LDAP directory? Will ldapadd work? I was under the impression ldapadd required an ldif file to work properly.
View 7 Replies View RelatedI'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I have like 4 email addresses on one Ubuntu One account and I'd like to remove them all except my current email... I also have an old account I'd like to delete. I used the contact form but to no avail.
View 2 Replies View RelatedI have a problem with the Google search box top right corner in Konqueror, when entering search I recieve an error page "Unsupported Protocol" Google asks for ioslave or kioslave. Also when highlighting text on a page and right clicking with the mouse no search option is given. I created a new user and all works as it should for the new user. What is wrong with my user account? I have reset default values in Konqueror setup.
View 3 Replies View RelatedIm pretty sure this is trivial to config, but I havent had any luck searching on google.My situation is: I want to forward any emails sent to my domain to another account. So:
Code:
root@domain -> another_acc
any_other_system_user@domain -> another_acc
any_unknown_user@domain -> another_acc
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedI've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies View RelatedI am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.
I boot linux from a usb drive so I can carry my distro wherever I go - I've been doing it for quite some time now and it's always worked wonderfully. Problem: This morning my little cousin unplugged the computer WHILE I was booting into linux. Power loss has happened before, but with no ill effects. This time however, it's decided it won't boot. The screen clears, and just as GRUB is about to load, it freezes and the computer reboots over and over.
I booted to a LiveCD of Ubuntu to try and fsck the drive, but it won't mount the volume. I've worked with this install so long, and have customized it so much I **really** don't want to do a reinstall.. What can I do?
I have two computers in my home running ferora . I want to copy a file from my 2nd computer to my local computer. Local PC:- 192.168.1.10
Remote PC:- 192.168.1.20
[root@localhost root]#scp 192.168.1.20:/home file1.txt
root@192.168.1.20s password:
scp: /home not a regular file
[root@localhost root]
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies View Related
