I was able to find a multitude of different keyboard fonts through preferences>keyboard>korean. However, the Korean keyboard is English only, and there's no Korean font. I would like to have access to the Korean font.
I'm using Centos 5.4 and have problem relate to the server's font. We installed Korean fonts on the server, but I can't read korean on the server, and I can't create file with a korean name.
I have a keyboard layout built in Korean language, and when i installed openSUSE 11.3 by network installation i keep keyboard layout to Korean. But after installation can't write Korean but still see Korean font in Firefox, cuz i added its font on firefox configuration settings. What shall i do? I want installed in English but still need to use Korean fonts to write something.
I got this keyboard no found error...no problem since my grub menu 1st entry is ubuntu...so once I got to load ubuntu, the keyboard magically works.
Basically when booting, it show "Keyboard not detected, press f1 to continue" then at the grub menu, I am not able to select win xp or anything. So by default 1st entry is ubuntu so I can boot into ubuntu.
Once ubuntu is loaded, I can use the keyboard to enter my password....
So I was wondering if the cmos battery is flat...but still why can't my key board be detected when booting up?
How do u add languages in 10.04? I went to System -> Pref -> Keyboard and added Korean and nothing happened for me found a few instructions but were way too dated
I have been having multiple problems setting up my friends computer to type korean. I installed Smart Common Input Method but none of the hot keys seem to register. If you need more info about the computer or installation just ask!
After I've upgraded to 10.04, the Korean text has become unreadable or very hard to read, on both KDE/Qt and Gnome/GTK apps. The text appears thiner and some characters/symbols are not fully rendered.
Has anyone encountered the same issue?
Update: In Dolphin and Nautilus the text is not rendered clearly, in Konsole is displayed just fine.
I'd like to use Korean but have an English keyboard, an English environment, and need to input via this method. It appears that there is currently no way to use ibus and have the functionality of the "hangul-romaja" tables that SCIM had. For example, it used to be, using Hangul-romaja, that I could type the letters "g" and "a" to get the Korean "가" (ga).
Now, the moment I type "g" it automatically writes. Typing "g" and "a" produces: Am I just doing something wrong? Using Anthy in Japanese works just fine...typing "g" and "a" produces a "が" just like it's supposed to. Anyone out there know what to do to get Hangul-romaja (or something similar!) working in ibus? Am I stuck having to just guess at the Korean keyboard layout or memorize it somewhere? Might there already be an ibus-compatible solution for this?
Have 2 FC 14 servers. On both of them set system default language to German (de_DE), reboot, and all is as expected -- all menus and messages in German. Then changed system default back to English, reboot, both are back in English. Then changed system default to Korean (ko_KR), reboot. One server comes up in Korean as expected, but the other comes up in English.
/etc/sysconfig/i18n is ko_KR.utf8 as expected. SSH terminal and execute 'locale' and all variables set to 'ko_KR.UTF8' as expected. Start a GNOME session (thru VNC), open a terminal and 'locale' shows 'ko_KO.UTF8'. Changed default language back to German, reboot, everything comes up in German. Change it to Korean, reboot, and we're back to English (not even German). (Note: LANG=en_US is set as kernel boot option, do that's probably why not German here.) Have trolled through DMESG and /var/log/messages but do not see any error message.Tried 'yum groupremove "Korean Support"' to clear everything out, then re-installed it. Still the same result.
I originally made this post in Linux-General, but only one person was really answering the question and now he hasn't been responding, so I've come here since Scim is also Slackware related.Simply put, I need to be able to use Scim to input the Korean language.Here's the original thread:[URL]
I am new with CentOS. I've installed CentOS 5.4 and now trying to create a directory with Korean name but it displays incorrectly.Please help give me some instructions to solve this problem.I could not find out the solution by searching document from internet.
My goal is when test should be drawn using mono, sans serif family fonts, Korean font should be picked up.I have added below entry in fonts.conf and the font is also installed under fonts directory.
Using FC_DEBUG flag, I checked that score for this font is not coming the "Best Score".I am not sure what the problem is, If I expect fontconfig to just replace sans with my font, it should take that.
I am going to install a computer for multi-language support for English and the Korean Hangul written language. I would like to configure the input from the keyboard to switch from English to Korean. I have keyboard with English and Korean and I would like to configure one of the keyboard buttons to switch the input language similar to how Microsoft multi-language support works. What applications and configuration changes are necessary to implement this.
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
I have been trying to get this web cam working for a long time. lsusb:
Code: Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc. dmesg
Code: [ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice Kernel patch: [URL] Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
I'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
Recently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
I have upgraded my laptop to 10.04 while having my usb-keyboard plugged in.f I boot the laptop without a plugged in keyboard, the laptop keyboard is not working. It starts working as soon as I plug a usb-keyboard in though.Quite annoying if I take my laptop with me and the first thing after booting is to find a usb-keyboard to plug in Does anyone know where can I reconfigure this? [edit]I just found out, that the laptop keyboar seems to be in numlock mode... meaning that the keys [j,k,l] is mapped to [1,2,3] etc
I have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .