I have just installed 10.04 on Acer laptop 5630.
I can not get my Internet going when I connect to my Dlink DSL 502T.
The network indicator changes from little arches to up and down arrows when I plug the router in which leads me to believe I have a connection.
I can ping addresses ok.
But when I open firefox i just get "connection has timed out"
I have tried changing various network settings but nothing seems to work.
Last night I switched from Windows XP to Ubuntu. This morning I could connect to my wireless network, but not access the internet. I tried several things like manually setting my IP address, but nothing seemed to work, then I found a solution on another site:
Code:
sudo dhclient wlan0
After I performed that action, I could access the internet.I then spent an hour and a half downloading and installing updates, before being prompted to reboot my laptop. I did so, but then could not access the internet again.I have now spent my entire afternoon browsing the internet (on another computer), trying to find a solution. I tried that command again, which now does not work. I have also tried different DNS settings and even plugged an ethernet cable into my laptop, but the internet still doesn't work.
I just changed my wireless connection over to wired and my computer claims it's connected but when I try to open and webpage (or even ping) it can't connect.
Keep in mind I am plugged directly into the router. Also I'm not sure if this is helpful but, I did have connection sharing for my xbox when I had wireless. I'm typing this on windows 7 which is driving me further into insanity by the minute.
When I click on the network connection sign at the top of the screen on Xubuntu (even on Ubuntu--I uninstalled it to see if that was the problem but the problem persisted on Xubuntu), it will say wireless network 'device not ready'. i tried running a command from the Xubuntu Troubleshooting and it said that my device was turned off for some reason. This is not true as I made sure that I turned it on. I've tried everything else and I am all out of luck. I also do not have a boot-up CD for Xubuntu/Ubuntu and I'm not sure of how to do all those commands in the terminal
.
About my network card...
Hardware details:
Board: Dell Wireless 1490 Dual Band WLAN Mini-Card Rev 5.8
Chipset: BCM4312/BCM2050
I forgot to mention at the bottom that it won't let me look at my hardware drivers and it says I don't have the correct things properly installed and then it won't show any drivers (so this problem probably cannot be solved using ndiswrapper).
i recently switched from windows vista to ubuntu 10.04, so i am a complete noob at this stuff... i enabled the ufw a few days ago and ever since then my Internet connection has been pretty spotty. i connect to the wireless network fine, and there is nothing wrong with the actual Internet connection (other computers in the house are using it fine) it is very frustrating and i was wondering if there is a way to stop this, do i need to forward some ports, or do i really even need the firewall at all... i don't really do many things that would allow me to get hacked in the first place..
View 1 Replies View RelatedIs it possible to get work internetcalls (form [URL]) on ubuntu?
View 4 Replies View RelatedIt seems like ubuntu can't find mye wireless network card. I have ubuntu 10.04when I type ifconfig the output is this
eth0 Link encap: Ethernet HWaddr 20:cf:30:01:9d:d2
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]....
I'm a first-time Ubuntu user. I recently installed Ubuntu 10.04 on my desktop, creating a dual boot in combination with Windows XP. Unfortunately, I can't get my Wireless Internet to work. It looks to me that Ubuntu somehow doesn't accept my Speedtouch dongle, seeing as the little green light on it stays off. The Ubuntu Help function simply suggests to go to Windows and "turn it on", but when I'm in Windows, it IS on... Also, in the network manager, there are NO wireless networks to choose from.
Futher down is some output from some commands that I see mentioned on forums discussing similar problems.
I think I should stress that I'm using a desktop, not a laptop, and that "hooking it up with a cable" is not an option, due to the distance between the desktop and the modem and the size and weight of the desktop. I would also like to stress that I have no experience managing my own Ubuntu system, so try to keep any instructions as simple as possible.
Telduivel
:~$ lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 05)
[Code]......
for the past 3 days i have tried everything i can find on the internet to get ubuntu to work. I am running a brand new Hp Dv4 laptop. I have downloaded, and installed Ubuntu. When i go to boot it, it takes me to a page where it says it needs to finish the install, and counts down from 5. If you let it complete that, it will go to a black page and sit there forever. Push ctrl + alt + del, and it will take you back to the page where you can choose Windows 7 or Ubuntu.
Go back to ubuntu, this time when it counts down i push Esc, and i have several choices. I have tried them all with the same results, except Demo mode. In demo mode, i get a black screen, and the sound of drums. But it still just sits there. I have tried doing ctrl +alt + f1 in each of the different modes, nothing. Just a black screen.
I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.
This is what I have done so far:
installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh
[Code].....
After upgrading to 10.04 I've had to run /etc/init.d networking restart to get my internet connection to work after startup on my desktop computer. Any ideas on how to find out what's wrong and how to fix it? I didn't uprage my laptop yet and it still works just fine so I'm thinking this is related to the upgrade. Softwarewise the only relevant networking related difference between my desktop and laptop is the ubuntu version and that I have openvpn set up on the desktop for work related stuff.
View 2 Replies View RelatedI recently installed Ubuntu 10.04 and it appears to be working fine except for one problem: the internet access does not work at all. It is supposed to connect through a wired LAN and can talk to the router but when it comes to opening a webpage or pinging a server it doesn't work. Firefox says that it can't connect and the ping does nothing.
The computer can connect fine when booting Windows XP, but on Ubuntu it can't. Here are some details about the two OSes:
XP: Connects to network and internet
Ubuntu: Connects to network but can't mount the 'Windows Network' folder which is the only thing in the Network directory. Can't connect to internet.
I'm on a Dell Dimension 2400.
I just installed the latest ubuntu (10.4 or something) on my computer, and it seems nice, but it won't connect to my wireless internet. Shouldn't it just automatically detect it? It doesn't seem to.
I'm not very computer savvy, but I figured that it may need to have drivers downloaded so it will work with my computer's wireless internet hardware.
But I don't think I can get any drivers if I'm not connected to the internet.
I do have another little USB wireless receiver, but that has an installation disk with an EXE file, which apparently does not work on ubuntu.
Note: My computer is a Dell Inspiron 1525. Ubuntu is installed as the only operating system. It is freshly installed.
I've just installed Ubuntu 10.04 on a Dell Inspirion 1501 and I can't get the internet to work. I've tried configuring a DSL connection from System> Preferences> Network Connections and It doesn't recognize the password. On Windows it works just fine.
View 3 Replies View RelatedI have installed Ubuntu on an other computer using a Ubuntu 9.10 cd and I can connect to the internet perfectly. Now that I upgraded to Ubuntu 10.10, the internet won't work. I can see the connection but doesn't seem to be able to connect to it.
I remember having a similar problem with Ubuntu 9.10 on an different computer but I never found a fix to it. I tried searching for fixes to similar problems but none of them seemed to work.
I no longer have a Auto eth0 connection. I am running 10.04 and have not done any major changes. Here is my ifconfig -a:
Link encap:Ethernet HWaddr 00:1a:a0:97:65:a9
BROADCAST MULTICAST MTU:1492 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]....
I installed it and it seems to run smother than windows vista so far but it wont work with my wireless internet the light that shows it is connected doesn't even glow. I am using a Compaq Presario Labtop.
View 1 Replies View RelatedI have just recently installed Ubuntu 10.04 and I can't get the internet connection to work. I have found out that the wireless adapter that is pre-installed in my laptop (toshiba satellite A665) has been interfering with the main wireless.
The adapter Ubuntu is trying to use it my WiMAX local wireless adapter which is incorrect. My main wireless adapter is my Intel(R) Centrino(R) Advanced-N 6250 AGN which Ubuntu can't find.
I finally got my apache web server up and running and tested it using local host. I was wondering how I can create a domain name now and get this accessible on the internet
View 7 Replies View RelatedI just upgraded from 9.04 to 9.10. When I restarted, I admired the new login menu, then went to Firefox. I noticed that my wireless didn't work (it did in 9.04) Thinking I'd just need to reinstall the drivers, I plugged in the computer to a working Ethernet outlet with a working cord. I noticed that Ubuntu didn't tell me that Auto eth0 was connected. It didn't tell me anything. And then I went to Google and realized that the wired connection didn't work either. Then I came here on an iPod Touch and you know the rest.
Edit: And other devices work too on the network.
I really want to convert over to ubuntu and use ubuntu netbook remix on my new netbook but I've had a hell of a time trying to get it to access the internet, I've tried installing drivers but I don't really know how.
My Netbook Details:
MSI U130
1.66 Intel Atom N450
1GB DDR2 Ram
Windows 7 Starter
802.11 bgn 1r1t Mini Card Wireless Adapter
All my other systems work fine, tried setting mtu to 1492. Everything is set manually in network connections. Tried deleting and making a new connection. I set the dns servers in the /etc/resolve (don't remember the exact path.) I can ping servers fine. This was a fresh install of 9.10. Again, the internet worked fine until I installed the updates from the update manager.I had internet problems when I first started using ubuntu a couple years ago.
View 1 Replies View RelatedWell maybe I missed it,but is there a listing of usb Internet sticks that work with Ubuntu?
I see the page for network cards etc,how about a sticky for a Internet Key page ? Always up for saving time and money.
I have a desktop pc with xubuntu 9.10 32bit installed. I don't have direct access to this machine, but they told me that internet is not working (firefox, synaptic,etc...), but only skype works! If they reboot on windows, everything works well, so it's not a matter of connection or dns.It's very important because they work with that computer. How can i solve the problem? and what could be the cause of this strange anomaly
View 3 Replies View RelatedI've been running Ubuntu 10.04 inside Windows 7 (demo version) for 2 weeks or so now and I really loved it. So much so that, last night I decided to burn the boot cd and put a full installation of it on the computer, instead of using Windows 7. After doing so, I started getting some small problems.
First problem was with aMSN, the webcam doesn't work anymore. It used to work when I was using the demo version of Ubuntu, but not anymore. I had to use meebo to get it to work, don't think that's a problem with Ubuntu though.
Secondly, Firefox is running really terribly. Whenever I try to watch a video, it stutters REALLY bad, as if it's maxing out my CPU.
Third, I'm getting an error message whenever I start Google Chrome, it says:
"Your profile could not be opened correctly. Some features may be unavailable. Please check that profile exists and you have permission to read and write its contents."
It plays videos well but half time the audio doesn't work and I have to restart Chrome. (I tried uninstalling and reinstalling through synaptic, but that didn't work, the problem was still there).
Fourth and finally, the internet is just really really slow. Since the moment I installed the full version of Ubuntu it's be REALLY slow. I tried a download through bittorrent and the speeds were terrible, I ran a speed test while downloading (upload was limited to 5 kb/s) and I was still getting speeds of just around 10kb/s. So I closed bittorrent ran a speed test again and I had 1mb download and .75mb upload with 31 ping. I ran the test again and got 42 ping with same download and same upload. While I was downloading, the ping was 309. My normal speed is supposed to be 6mb download and 1mb upload
I guess version 7.0X had internet issues aswell because, when I did a google search for a solution, it turned up several results on how to fix it for 7.0X, which didn't work because the alias list didn't have anything in there. (the fix had something to do with ipv6). I tried direct connecting my internet and the speedtest results were normal, so I've concluded that it has something to do with my router. However, I don't know how to do a firmware update or troubleshoot the issue on Ubuntu. I finally decided to give up on Ubuntu and switch back to Windows 7. However, my drive is currently formatted into ext4 and I need to go back to NTFS, how do I do that? Could I just use gparted?
How do I get my Bigpond internet (ZTE MF636 BP) USB modem to work with Ubuntu 10.4 LTS ?
View 1 Replies View RelatedEvery time I turn on my ubuntu box, it somehow kills our internet connection... yes, even through the router. The internet will not work until I call tech support and they run a line test. Then it works again as if by magic. I'm at a loss. A friend suggested maybe ubuntu is trying to establish itself as the dhcp server on the network? I have ubuntu 9.04, 32-bit, workstation.
View 2 Replies View Relatedi have a routed and a PPPoE type internet connection, recently i tried a thing in terminal with the pppoeconf option since the network manager has problems with connectiong to the internet with a pppoe DLS connection, or anyway in my case it does not work. Ok i did the pppoeconf thing i inserted my pass and my user and left the program to do its thing, ok it all worked fine but then i restarted my system and suddenly the network manager did not want to recognize my network it hat as options some weird ipupdown options for connection and when i tried the pppoeconf thing again it did not work. what could i do to reactivate at least one way my connection, if i understood correctly the terminal type connecting and the network manager are two different things. now i am using my router and it should connect but the network manager still does not see the connection.
View 3 Replies View RelatedI have just set up a server with Ubuntu Server edition 10.04. I installed it by plugging the harddrive into my main pc as the server doesn't have a cd drive. Now the drive is back in the server and the internet won't work. I have run lspci and lshw and neither show a lan or network card anywhere. ifconfig comes up with nothing related to eth0, and says the 'inet addr' is 127.0.0.1. My motherboard has an onboard Realtek 8101L LAN controller. Can't seem to find much with a google search
View 2 Replies View Relatedhow i can get remote desktop to work on a outside Internet connection i can get it to work on my router but my brother cant access it from his pc i have vnc view on his pc but ever time i try to connect from his pc it keep saying cant connect any idea how i would fix this i have the firewall on my lunix system turned off
View 9 Replies View Related