Ubuntu :: New Video Card Ububtu Won't Boot
Nov 11, 2010
Installed 10.4 lts on a Dell dimension 2350. Runs fine except that the video failed and a bar pattern is painted on the upper half of the screen. I works after a reboot for a while. So, I figured that the video card was failing and I replaced it with a ATI RAGE 128PRO 32 MB. Since the failed video is integrated into the mother board, the BIOS were modified to select the PCI bus. The initial Dell screen work and the initial UBUNTU screen with the four blinking dots come up but that is as far as the boot proceeds. The same result occurs when booting from the CD.
View 1 Replies
ADVERTISEMENT
Jul 30, 2011
I just got a Macbook air and only have a 128 gb ssd and would like to install ububtu on a 8 gb class 6 sd card to conserve space.
View 2 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Sep 1, 2010
changed my video card from a Geforce 9500GT to a Geforce 210GT and the noveau driver won't let me boot into ubuntu so i can't get ubuntu to redetect my video card. how can i fix this?
View 1 Replies
View Related
Mar 25, 2010
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies
View Related
Jul 27, 2010
I have a full install on a dedicated partition. And the problem persists. I have tacked it down to the driver for my video card [nVidia 9600m GS]. When I disable the driver, it somewhat returns to normal [it works fine on shut down, but boot up is still buggy]. However, this makes Docky complain about compositing [it will still work, but there's a black void around it] not being enabled. I also assume that lacking the driver will cause problems if I try to do anything 3D.
View 1 Replies
View Related
Jun 23, 2011
I was installing Debian Squeeze into a G5 with an Nvidia Geforce FX 5200 ultra video card. The install went well but the system would not display any output. I did some research looking into the module configuration files in the /etc directory and dmesg log files and discovered that it was incorrectly identifying the video card as a "nouveau" card. I put the name "nouveau" in the modprobe.d blacklist file and it booted fine after that.
View 1 Replies
View Related
Mar 17, 2009
I have 2 screens connected to my nVidia 8400GS and would like to change my video card settings so that the system boot shows in the Digital screen and not in the Analog one.
View 3 Replies
View Related
Apr 23, 2011
I have an image generator (IG) running 64-bit Ubuntu Linux, GNOME & the SAGE application all running through an NVIDIA Quadra FX4500-X2 (dual GPU). Had to install a new FX4700-X2 (and the latest drivers) because 4500's are unavailable. The computer works fine except but I cannot watch the whole boot up sequence on the same DVI port anymore.On the 4500, all video came out the lower DVI port of the GPU with the PCI-X connector (let's call that the "a" GPU). But on the 4700 card, the screens you see during boot are divvied up between the lower DVI port of each GPU. The POST screen through Ubuntu splash screen comes out the "b" GPU while the "a" GPU is blank. The SAGE Initialization page and SAGE Desktop comes out the "a" GPU while the "b" GPU is blank.
I logged in as root and looked for a GNOME menu allowing me to force all video through the same GPU & DVI port, but couldn't find anything remotely close. Any suggestions on where I can look? Technically this IG is working, but I want to fix this to avoid future wild goose chases. The system uses 52 of these IG's.
View 2 Replies
View Related
May 4, 2010
I have just installed Ubuntu 9.04 on my daughters pc which also has xp installed as a dual boot.I am unable to access the internet via ethernet or wireless in Ubuntu however when booted into xp I am able to connect to the internet and my home network.Can anyone please help me work out how to get a ethernet and/or wireless connection working while booted in Ubuntu.
View 3 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Jul 15, 2010
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
View 6 Replies
View Related
Jun 12, 2010
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
View 1 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Dec 22, 2014
After a fresh install of 7.7.0 (amd64), I'm unable to boot into Debian. I get the following error constantly when booting in recovery mode:
(snip) [drm] nouveau (snip) PMC - unhandled INTR 0x44000000
A bit of Googling seems to indicate that this is due to my video card (Geforce GTX 750Ti). Unfortunately, my motherboard doesn't have any monitor ports, so I'm forced to use a video card in order to use a monitor. Something I didn't foresee being an issue, but what can you do. How should I resolve this? Is there an ISO that has the (presumably non-free) drivers included? A way I can add the drivers during boot (I am able to boot into my Windows partition by changing the boot order, don't know if I can do anything useful from here)? Or do I have to do something crazy like buy/borrow an older video card just so I can properly boot into Debian, and then install the drivers?
I've got a secondary problem: GRUB has my Debian install as the only option, even though I had Windows 8.1 installed first. I don't know if this is related to the problem above, or it's a known problem with newer versions of Debian and/or Windows (and I have to update the menu.lst or whatever myself), or if it's due to the way I set up partitions. My current setup is:
SSD:
- Windows boot partition
- Windows main partition
- Debian / partition
- Debian swap partition
HDD:
- Debian EFI partition
- Debian /home partition
- Unallocated space (will eventually be a NTFS partition for shared storage)
This is the first time I'm using a motherboard with EFI/UEFI. It's also the first time I have an OS taking up partitions on multiple physical devices. I don't know if either is the cause of GRUB not detecting Windows.
View 2 Replies
View Related
Nov 22, 2010
I want to upgrade from my 128M video (on board) to a 512M card. Since so many problems seem to revolve around video cards, which one manufacturer would be likely no cause me little or no grief installing and running?
View 1 Replies
View Related
Jan 8, 2010
I'm pretty sure I cooked a video card (fanless deal, prone to running hot). Anyways the computer boots fine and everything seems to be working from an ssh perspective. Is there some way I can ask the machine if the video card is broken?
View 1 Replies
View Related
Apr 26, 2010
It's a geforce 9500gt 1Gb 128bits. How can i see if it's working or not? And where can I find a driver to it? I've looked in the geforce's site and i've downloaded a file with the extension .run, but this file didn't work. What should i do? Core2Quad, 4GBram, geforce 9500gt 1Gb 128bits, asus's motherboard, hd 500gb sata. Ubuntu 9.10 64bits.
View 6 Replies
View Related
Aug 7, 2010
I'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
View 2 Replies
View Related
Aug 17, 2010
This would be the one thing that has always held me back from using Ubuntu as my main OS on my desktop. Now with Lucid Lynx in the picture I would really like to try again and get some answers this time around.
I have 2 GPUs in my system, a HD4870 and a HD4350. The HD4870 has a Benq 24" and a Dell 17" which are working fine in a multi-display desktop setting (No Xinerama) configured via CCC.
On the HD4350 I have a single Samsung 17" which in CCC is listed as '[Unknown Display] Unknown adapter' and cannot be used. How can I get that working properly so I can configure it as an additional screen in this setup?
Also on a side note, I have a small problem with CCC. When I installed catalyst and drivers I configured my screen resolution and multi-display desktop, but every time I reboot my resolution for both screens is set to 1280x1024 and they are cloned. Why don't my settings save?
View 9 Replies
View Related
Sep 2, 2010
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
View 3 Replies
View Related
Oct 22, 2010
Just installed 10.10 and I am very impressed.
I am not having a big problem at all but my built in video system is clearly behaving like it does not have the right driver.
Are there any video cards out there that are directly well-supported by linux? i.e. genuine linux drivers that allow the card to function at full capacity or close?
View 3 Replies
View Related
Nov 29, 2010
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies
View Related
Mar 9, 2011
I would like to connect a 42 inch plus tv to a Dell Dimension e521. I need to know how big of a card (512, 1gb+) to put in it to push the image. I want it to have a HDMI port.
View 6 Replies
View Related
Oct 21, 2010
Ubuntu 10.04 has always been unstable on my Gateway GT5422E. Running slackware 13.0,13.1 on this box has been a much stabler environment. To make a long story short, I suspect that a video card might be the solution. Current, I am using the nvidia graphics chip which is built into the motherboard and has only 128 meg of shared memory.
I'm looking here: [url] at some pci-express cards. I might like to get something other than nvidia, so I've looked closely at this one: [url]
View 3 Replies
View Related
Jan 28, 2010
I have geforce fx 5200 and i downloaded the 32 bit and 62 bit for the video card driver update and i dont know how to use them and they and they come in scripts !
View 3 Replies
View Related
Feb 6, 2010
Working on a friend's PC, which was previously running XP and got a very nasty virus infection. I convinced him to try Ubuntu, showed him the interface running on my own machine and he was hooked. Backed up all his data to network, completely erased the hard disk and install Ubuntu. Sounds easy, right?
Installed 9.10, it didn't detect the video card and xorg.conf was missing from /etc/X11. After some messing around trying to get it to work, I realised that the sudo dpkg-reconfigure -phigh xserver-xorg command wasn't working properly and didn't produce the menu shown in the screenshots. After some digging I found that this was a bug in 9.10, so to make the job easier, I wiped the drive again and started again on 9.04.
With 9.04, at least the xorg.conf file was there, but had no entries under configured video device. I tried adding "vesa", "via", "openchrome" (all on separate attempts), all to no avail. I retried the dpkg -reconfigure command above. still no menu.
Now several days into this "easy" install, I rolled back to the LTS release (8.04 - hardy) and installed that instead. Still no video card detection, and resolution is obstinately stuck at 800x600. Tried the same string of tests again, and now admitting defeat The relevant output from lspci is: 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)
The output from xrandr is:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0
[Code]...
View 6 Replies
View Related
Mar 5, 2010
I have bought asus notebook with nvidia geforce GT 320m, and installed ubuntu 9.10 notebook remix, and i can't found any drivers for video card, iam new in linux.
View 9 Replies
View Related
May 13, 2010
I'm about to install a 'new' ATI Radeon video card into a Ubuntu 10.04 computer of mine (an ASUS A7VT) that has VIA onboard graphics. My question is, how will Ubuntu deal with this? Will it automatically download the required drivers or would I be better off with a fresh install after I've put the card in?
View 8 Replies
View Related
