I have just installed Ubuntu 9.04 on my daughters pc which also has xp installed as a dual boot.I am unable to access the internet via ethernet or wireless in Ubuntu however when booted into xp I am able to connect to the internet and my home network.Can anyone please help me work out how to get a ethernet and/or wireless connection working while booted in Ubuntu.
View 3 RepliesWhen i checked to see whether the driver is installed or not it gives the output:
[root@localhost /]# ndiswrapper -l
bcmwl6 : driver installed
device (14E4:4315) present
[code]...
I just set up my computer to dual boot Windows XP Home and Fedora 10. After installation, on Windows, the internet works just fine (since I'm able to compose this message). However, the internet connection on Fedora does not work.
Here are the details:
I'm connected via a cable modem only.
I have an Ethernet cable connecting my modem and PC.
I've tried looking info up online about the issue and many people say to do an ifconfig -a to get the MAC Address and so forth. How to get the connection working to use the internet with Fedora?
I've installed opensuse 11.2 on an old IBM thinkpad. The install went without a hitch and when I got to the desktop I inserted my Dlink DWL-G132 wireless USB adapter. Opensuse immediately recognised that a wireless device was attached and I could see my wireless network listed. I entered my WPA password and was able to connect to my routers configuration page by entering 192.168.0.1 in the URL bar of firefox. For some reason I am unable to navigate to any webpage. When I enter a URL firefox acts as though there is no internet connection. The only way I can get the internet on my laptop is to connect it to my router with a cable. I used a wired connection and ran the update utility thinking that perhaps an update would fix the issue but it did not. I know the adapter works because the laptop used to have windows xp installed and I could connect fine with that.
Does anyone here have any idea why I would be able to connect wirelessly to the routers configuration page but not to the internet? I appreciate any advice anyone may have.
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies View RelatedI recently installed KDE in my ubuntu machine. I would like to try it out for a few weeks at least, but networking is not working at all.
I somehow managed to find the network settings and it shows no connections, wired or wireless. When I log out and log back in with gnome, my wireless gets connected automatically.
I'm using a WUSB54GC network adapter to connect to my home wireless network. My network was not visible, so I added it and it shows connected, but when I launch the browser, I can't get a connection. I'm using Ubuntu 10.4. All other computers on the network connect fine and I disabled my firewall to see if that made a difference.
View 1 Replies View RelatedI am fairly new on CentOS and am in the process of setting up a small home office network that shares Internet access through the Linux (CentOS) box.I have two network interface cards The Linux box is also the DHCP server. My challenge is to get the client machines to access the Internet! I have a PPP connection to the ISP. Essentially I followed these Instructions CENTOS REDHAT Internet Connection Sharing. Pretty straight forward but I am still not able to get clients to access the Internet. I defined the DNS server through DHCP (196.44.x.y). I assumed it has to do with default gateway and it is set as follows: on the Linx box the gateway is my ppp0 link. DHCP uses eth1 (LAN card) fixed IP as the gateway. All clients are reflecting this information. The firewall (iptables) is reflecting the FORWARDING and POSTROUTING rules as advised.
Is there a step I mioght have missed to get this working? I tried to Google but its not getting me far.
I would like to have all traffic from the ethernet connection out through the wireless (basically using the box as a router) however I am having some trouble doing this.
I have done this before on Windows however I am having some trouble doing this on linux, I have tried using Squid Proxy however I am having some trouble using configuring/using it.
I am using Yellow Dog Linux however I am willing to change to any other distro as long as it is compatable with PS3 (as this is what im using linux on)
I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
View 14 Replies View Relatedi installed Opensuse 11.2 recently but the wireless internet wasn't working been searching for few days now and i can't find the solution. it shows my modem, and i can connect to it but for some reason it appears to drop the connection it keeps asking me for my encreption key so btw is one of the first times i worked with linux / opensuse.
View 4 Replies View RelatedI have internet on my ubuntu machine (eth0) I am sharing with (eth1) My windows computers are getting IP addresses via DHCP from the Ubuntu Machine, and I can see (and use) samba/windows shares on all computers. Internet connection is not working on any of the windows computers.
I have eth1 set to "shared to other computers" under the IPv4 settings
Ever since my BT Hub 2 has updated a few weeks ago I'm unable to connect to the internet either wireless or wired. I duel boot on my netbook with xp and duel boot my desktop PC with windows 7. None of the Ubuntu�s are able to connect, I have no problems with the windows side of things.
Has anyone any ideas on how to fix this until BT decide to fix the problem. Preferably a step to step guide as I have limited experience with Ubuntu. I�m using Ubuntu 11.04.
i installed a linux flavor (Ubuntu 10.04 LTS, Ubuntu 11.04, and then Linux Mint).. They all gave this same problem about the wired network (see the picture). The connection seems to be fine but i can't connect to internet or even to my router. Which is weird since it knows my router IP 192.168.1.79. Wasted the whole night trying to figure it out but i just can't understand why. I have a separate partition on this computer to run Win7 also and confirmed that the network connection is working.
View 9 Replies View RelatedI am trying to get a NetGear WNDA3100 working on another computer with ubuntu. I've searched and searched, but all the threads and answers say to install some ndiswrapper thing. One problem with that though- the desktop doesn't have any adapters at all, I'm trying to install the WNDA3100 just to get internet in the first place. I have no internet, cannot download and install anything, and I can't use any apps or commands that don't come with the default Ubuntu 10.04. Please help me out here!
View 3 Replies View RelatedI wouldn't be posting this if I hadn't tried very hard for the past week to do this on my own, but alas, I failed. I have this two configurations:
Desktop:
- Ubuntu 9.10
- Connected to the internet though a wireless card
- Connected to "Laptop" via wired network with a crossover cable
Laptop:
- Dell latitude
- Ubuntu 9.10
- Connected to "Dektop" via wired network with a crossover cable
The wired connection is working, both computers are able to ping each other, but I haven't managed to share internet, nor files. I have tried many different ways, from setting the wired network to "Shared to other computers" to this guide in the Ubuntu Wiki. The best I could get was for the connection to work by setting the IPs manually, whatever else I try results in either nothing or in a not-working connection.
I have been using my laptop as a development machine for a few months now, developing php/mysql applications, and testing them offline via the same laptop by pointing the browser to url.
But a few days ago, my url stopped working and I discovered that it will now only work if I have an active internet connection plugged in. Why has this happened and how to I fix my test server so localhost works with or without an internet connection via an ethernet cable.
I am setting up a Beowulf Cluster using CentOS 5.5. I have the head node with two NIC devices eth0 and eth1. eth0 is the one that is connected to the WAN while eth1 provides the internal LAN connection. I am trying to configure internet connection sharing with the slave nodes on the network so that I can update/install software as needed via ssh sessions using yum. I have set up the master node with the requisite changes to iptables to enable IPv4 forwarding. From my slave nodes I can ping ip address from the terminal, but my domain name resolution is not working. i.e. if I ping [URL] it can not resolve, but if I ping 74.125.224.50 (one of google's IP's) I can communicate with the machine without a problem. I also ran the configuration tool provided in the README section of the forum on the slave node and the master node. The links are:
[URL]
I have no idea how I managed this, but I am able to connect to the internet but NetworkManager doesn't show any connection. This means that until I kill it, I cannot log in with Pidgin, because it is waiting for a connection.
Do I disable NetworkManager completely or do I try to make it recognize that I am connected to the Internet? If the latter, then how should I go about? (Please let me know which files I need to show you, because I know I've messed around with a couple).
After several hours of frustration to point of almost scrapping linux alltogether I was finally able to get my wireless networking to work in Linux Mint 6. I searched for hours and came up with several different suggestions that were supposed to fix my problem - NONE OF THEM WORKED! As a new linux user, I can completely understand why so many people try linux and then give up on it. It should not be so hard to get a wireless internet connection working.
Said another way - the people making distros should read these forums and see what difficulties are experienced and work on fixing them. In any event - I want to post my solution to the problem for my COMPAQ CQ60-211DX so that anyone else who wants to try linux on this model laptop will save a great amount of time. Here are the steps I took to get linux mint 6 to work on my laptop:
1. Open terminal window
2. Type - lspci | grep Atheros
3. Hit the enter key
If you see: Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
then these instructions WILL get your AR242x (AR5007) wireless card to work for you. Be warned - I tried everything I read including ndiswrapper, etc. - none of it worked! You will need to click the menu button go to all applications and then administration. From there, select hardware drivers and look for anything that has Atheros in it. CLICK DEACTIVATE! Now you will have to restart your computer. When it starts back up....
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI just got a Macbook air and only have a 128 gb ssd and would like to install ububtu on a 8 gb class 6 sd card to conserve space.
View 2 Replies View RelatedInstalled 10.4 lts on a Dell dimension 2350. Runs fine except that the video failed and a bar pattern is painted on the upper half of the screen. I works after a reboot for a while. So, I figured that the video card was failing and I replaced it with a ATI RAGE 128PRO 32 MB. Since the failed video is integrated into the mother board, the BIOS were modified to select the PCI bus. The initial Dell screen work and the initial UBUNTU screen with the four blinking dots come up but that is as far as the boot proceeds. The same result occurs when booting from the CD.
View 1 Replies View RelatedMy wired network dead which i used before 1hr. I seen my firestar firewall application blocked a hit from my internet provider gateway address. I allowed all the connection from my provider gateway after that hit. It did not work. I installed a new OS ubuntu 10.04 tls. and assigned the IP address but still I cant acess the internet. It says connection was established but i cant browse net. Some one pls help me. I tried configuring fire fox. no use.I am using Internet dish. I configure it by browser by entering dish IP.
View 9 Replies View Relatedinstalled ubuntu 9.10.I am from India I use ADSLrouter to get connection in XP windows through WAN main port PPPoE.But after installing Ubuntu 9.10 I could not find my internet connected toMozill Firefox in Ubuntu 9.10.SO please tell me a way how to establish internet connection in Ubuntu 9.10 in a detaled way
View 2 Replies View RelatedI have 3 partitions: 2 linux and 1 windows.
I have been using the 3 OS regularly with no problems. But today suddenly, I had no internet connection with the 2 linux partitions which are complete independent, but no problems with windows. i can keep using the internet under windows with no problems.
I haven't touched any conf files.
I have a usb wifi internet connection.
I just noticed a change in my dmesg file when i start any of my 2 linux partitions.
At the end of the lines I have the following :
I'm having a problem connecting to the Internet on my gNewSense installation. My Internet works fine through Ubuntu and Windows, but not through gNewSense, is there anyway of fixing this? Also, while searching around I found that somebody said I ought to type "dmesg" and copy the results.
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-24-generic (root@sandbox) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Sep 10 19:00:20 UTC 2009 (Ubuntu 2.6.24-24.59gnewsense9-generic)
[ 0.000000] BIOS-provided physical RAM map:
[Code]...
I just downloaded openSUSE 11 but I don't have an internet connection. I thought that it will find my cable connection automatically like Ubuntu does, but it didn't. It doesn't have a normal network configuration set-up, there is nowhere that it even gives me a choice to select local internet connection or a cable connection. What do I have to do to set it up.
View 3 Replies View RelatedI have just installed Ubuntu on my PC using Wubi. I am having trouble configuring Ubuntu to connect to the internet.I have a wireless network, using a WEP password.What are the steps to get connected?
View 1 Replies View RelatedI have dual boot in my laptop-X.P and linux ubuntu 8.10.I have set up internet connection in xp by Local area connection via Realtek PCI GBE family controller using IP address,d.gateway etc.my connection is wired.As i am new to linux, i do not know how to connect internet in linux ubuntu. please give me step by step instructions.
View 1 Replies View Related