After upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed. Computers behind my ubuntu router can ping it, have access to it (apache, samba, etc.). Only internet isnt forwarding. Clients configuration is the same as before upgrade.
View 2 RepliesAfter upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
My friend has 2 pcs, one connected to the internet and the other one used to connect (when he had windows installed) to the internet through the first one using internet sharing, now i installed ubuntu on both and the network between them has been created but it wont connect, the internet icons just animates for like a minute then says "wired internet disconnected" in other words it failed to connect.
View 1 Replies View RelatedLinux Internet Doesnt work
Its connected...
to router netgear
I want to connect my OpenSuse 11.3 Distribution with the Internet via WLAN. But i can't open the KNetworkManager. It doesnt respond to my clicks. If I click on the KNetworkManager "Button" it doesen't react.
Result : I can't modify my WLAN-Connection.
I'm trying to set up a wireless AP with Internet sharing. I currently have the AP setup with hostapd and a dhcp server. The clients can connect but there is not Internet sharing. Now my situation is somewhat uniqe in that my internet connection is my teathered android cell phone. The tether app is azilink and i use openvpn to create a virtual networking interface(tun0).
View 4 Replies View Relatedright now im using the nm-applet but i dont like it. it produces lags. i think the periodical ssid/broadcast check might be the cause :/it lags every minute or so...in games and skype it is very annoying! if there is a possibily to disable these scans in nm-applet it would be fine too.for the moment im "using" this wpa_supplicant config:
Code:
ctrl_interface=/var/run/wpa_supplicant
eapol_version=1
[code]....
I'm trying to set up a PAN between two laptops to use as a transport for layer 3 communication..my problem is that it just doesnt work.
View 1 Replies View RelatedI used to be able to connect to the wireless but recently Ubuntu has gone waywards on me.How do I find out what wireless hardware I have? How do I get the right driver for it?Currently I can identify the wireless but cannot connect. Connecting with Ethernet works.
View 4 Replies View Relatedgenerally whenever there is a wifi connection available fedora will detect and i can establish the connection but today i am not able to see any such wireless network available. I am in a wifi accessible area and i need to know how this can be rectified. i tried iwlist scan in the terminal but that doesnt seem to work
View 1 Replies View RelatedI have little question, how can i share internet in Ubuntu? In this case to Win 7? I have tried Firestarter, but that doesnt work... And please I do not have a router I just need simple connection from my desktop to my laptop, and I dont want another box collecting dust.
View 1 Replies View RelatedI have a laptop running Windows XP with a secure wireless internet connection. I want to share this connection to my desktop running Ubuntu 9.10 via an direct ethernet cable connection. So far in Windows I checked the "Allow other network users to connect through this computer's Internet connection" in the Wireless Network Connection Properties menu. Doing this creates a new IP Configuration. Here is an output of running the ipconfig command: Windows IP Configuration
Code:
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . : home
IP Address. . . . . . . . . . . . : 192.168.1.3
Subnet Mask . . . . . . . . . . . : 255.255.255.0
[code]...
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
I have an Ethernet hub, and want two computers (both notebooks) to share my internet connection. One is running Ubuntu 9.10 and the other is running Windows Vista. I want both computers to be able to connect to the internet (I use a cable modem).
However, when I plug both computers in, I am able to get only one of them working at one time. When Ubuntu works with the internet, Windows does not work (although it sees the internet connection). When Windows works, Ubuntu sees the connection, but cannot connect.
I'm trying to share an internet connection between two computers. The one currently online is a HP Presario running Ubuntu 9.10, and connects through a wireless connection. It has an ethernet port, which I'm hoping to use to connect to a Dell Desktop running Windows XP pro SP 3. I'm hoping to make this happen one of two ways.
1. Without having to mess with any DHCP settings. Sadly, I live with my parents, and the router in their room uses DHCP and sets the addresses for all the computers on the network. My parents don't want me screwing with any of the settings on the router. is there a way to just have Ubuntu pass information from the ethernet connection to the wireless connection without having to deal with DHCP.
2. I'm sure this has been explained, but as I'm new to Ubuntu, I will pretty much need step by step instructions to do this part. Sorry to be difficult. Is there a way to have Ubuntu keep the current settings it has on the wireless side (let the router determine it's address and all of that good stuff), but have a DHCP server kick in on the hard-wired side so Internet Connection Sharing has an address to look for on the laptop?
I want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies View RelatedJust took the plunge and removed Windows 7 from my desktop rig and I am currently using Ubuntu 10.04
I was using this PC to share my Internet (DSL) connection to any and all other PC's on my network, wired and wireless, and I am attempting to set this up in Ubuntu.
My desktop, other wired PC's, a wireless AP and my DSL modem are all connected to a 8 port Ethernet switch and I was using ICS in Windows 7 to share my Internet connection once I established the connection from my desktop.
Can this be done in Ubuntu? As soon as I make the DSL connection it says that Auto eth0 disconnects (which I set to share to all in IPv4 settings which I read on the forum is the way to share)... thus nothing is currently shared :/
In this document it states that the sharing computer needs two network interfaces... but in Windows I only used the one...
The place I will be staying at (Japanese Guesthouse) only offers internet through cable. What I'd like to do is be able to connect my other devices through wifi (Cellphone for example) to the Ubuntu machine connected through this ethernet cable in order to access the internet.I've searched for a good hour but I'm getting extremely confused about the gateways, bridges or whatever else people suggest. Most of what I've been able to find actually only covers getting internet through wifi and then sharing it through lan (I'm trying to achieve the opposite).
So if anyone could point me in the right direction, or at least tell me what terms I should be using for my searches, it would greatly help.Some computer info might be useful. I'm using a Dell XPS M1210, the network adapter is an Intel Pro Wireless 3945ABG and I'm running Ubuntu Desktop Edition 10.10.
I have a desktop PC and a laptop, both running Ubuntu lucid, the laptop has XFCE and the PC has GNOME, but that's actually not relevant.My PC is connected to.I can't access the internet from my laptop, but whenever I connect the two machines with a network cable, my PC sees the connection at eth0 (even announces connection and disconnection), but my laptop does not.I have no idea what's going on, could this be a faulty cable or a faulty network card at my laptop? Or I simply screwed up the connection setup?
View 9 Replies View Relatedi have 2 laptops which is one installing windows 7 and the other one is ubuntu 10.04. i have internet on windows 7 and want to share to linux ubuntu 10.04 through wireless connection. How to setting that?
View 2 Replies View RelatedA friend of mine is trying to setup internet connection sharing in Ubuntu, which is something I've never dealt with before. Here's the situation:One desktop PC is dual-booting Ubuntu and Vista. This box is connected wirelessly to the router and can access the internet just fine. The desired setup is to have an xbox360 connected (wired) to the desktop PC, allowing it to share the internet connection.
1) A crossover cable would need to be used between the desktop PC and the xbox.
2) The xbox would still have the router's internal IP as the default gateway (I have zero experience configuring networking on an xbox... I hope these options are easily available).
3) The internal IPs can all be on the same network (i.e. router = 192.168.1.1 ; desktop = 192.168.1.100 ; xbox = 192.168.1.101)
4) IP forwarding would need to be enabled on the Ubuntu host
Is there anything I'm overlooking or just oversimplifying, or should that just about do it?
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
for the last one week i'm facing problem in sharing internet between xp and fedora. I'm connected to internet through wireless adapter in xp and wants to share internet through crossover cable between xp and fedora. I did the following steps.
1: start a network setup wizard in xp.
2: change the smb.conf file in fedora and change the workgroup name to same as in xp.
3:in Xp the ethernet adapter has address 192.168.0.1/24.
4: when i connect the crossover cable and start fedora. it couldn't get the ip address through dhcp.
5: when i tried giving the ip address manually "192.168.0.2/24 with gateway 192.168.0.1"and save the subnet mask is replaced by 192.168.0.1 don't know why it not saved.
i tried changing new ethernet card but not worked. some time avc denials message "SELinux is preventing consoletype (consoletype_t) "read" to /var/lib/dhclient/dhclient-eth0.leases (dhcpc_state_t)." comes. can any one tell me how to enable or make a network in fedora . i 'm very new in linux and couldn't able to share network .
I'm trying to use my bluetooth connection on Opensuse 11.4 to share its internet access with my Windows 7 laptop.I've been able to link them together(send receive files) but cannot create an Adhoc network or share internet with the link.What should I try? Could someone point me into the right direction?I looked at one promising tread that looked as if it would work but cant find hcid.conf(did a complete file search and think it may have been changed in bluez).
View 2 Replies View RelatedAt my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
How to share internet between two ubuntu PCs via bluetooth?
I have a Desktop and a Laptop. Their Configuration is as below:
Desktop:
Laptop:
Internet Connection: I want to use my desktop internet connection via blutetooth for this computer.
So the question is that how to share internet connection between these two Ubuntu computers via Bluetooth?
Remember that:
I've seem that HOWTO about connecting ubuntu PC to internet via mobile phone. I don't mean that!
i have an evdo connection with which i connect to the internet. i have been trying to share this connection for quite a few days from my lucid machine to a windows 7 pc but have failed. i have tried dhcp3-server, firestarter, network manager's built in capabilities but have failed! today i manually configured da windows 7 pc to an ip address within da range which network manager ws assigning when 'shared to other computers' ws selected and it worked! Now da question is how do i do it automatically? dhcp3-server never starts, it always fails with the error 'not configured to listen' or sumthng like it! Plus i want the wireless of my laptop to make an ad hoc connection to my mobile fone, which is also no possible...i think its some problem with da dhcp server.
View 1 Replies View RelatedI have been looking for a solution to an apparently simple problem, but could not find anything for Lucid. All solution I found imply modifying files that apparently don't exist anymore (/etc/default/bluetooth, /etc/bluetooth/hid.conf, ...)I have an old laptop running Xubuntu (lucid). Internet card is dead but it has a bluetooth adapter in the USB port. I also have another laptop with internet, wireless, and bluetooth on board. How can I configure both so that the first access the internet trough the second?
- Internet works on the second (of course!)
- Bluetooth work on both, I can pair them and send file from one to the other (although I cannot browse them, but it seems to be an unrelated problem)
- I have blueman on both and tried to configure it to do what I want but it did not work (old computer has a bnep0 interface, but no address for it)
- Old laptop sees "Network access point" and "group network" as bluetooth services of new laptop (although I did uncheck "group network" in the local services setting on new laptop)
- as I said I looked on the web but only found solutions that appear to be designed for older versions of Ubuntu because they refer to non existing files on my two laptops.
I'm trying to share the internet connection of my Windows XP Virtual Machine (virtualbox) to Ubuntu. I know it sounds weird, but what happens is that i'm using a 3G modem to connect to the internet and 3G connections are still very unstable with ubuntu's network manager. Fortunately, the modem works a lot better with my Virtual Machine. I have already set up a "host only" network between my Windows XP guest and my Ubuntu host and i can they can ping each other but i still can't share the connection of my virtual machine. I already selected "share this connection" on win xp but i think i still have to configure something on ubuntu for it to work. The interface Ubuntu uses is vboxnet0 (not eth0).
This is the last thing to do before i can get rid of my Windows XP partition
is there any way that i can share my computer's internet connection with my iphone. i've tried to set up an AD-hoc network and bridge it with the internet-connected interface but i ended up with no connection in both the pc and the iphone. im using ubuntu 10.04 lts and i have 2 wireless cards it will be great if i can use the usb cable to share the internet.
View 2 Replies View Related