I'm running Ubuntu 10.04 64bit on a 15' Dell Studio After doing an update my internal wireless will not connect to my wireless network. The card is on, I can see networks around me, but it will not connect to mine. It just acts like its connecting and then disconnects.
View 4 RepliesWifi seems to disconnect fairly requently, sometimes reconnecting automatically and sometimes requiring me to re-enter the wep password.
I would like to make it so it stays connected.
The router is not very close, but I think it's close enough. I even moved it closer. Other devices (such as my N900 mobile phone) hold the connection without issue.
One complication is that there are several devices all with the same SSID, though there should be one which is clearly stonger.
Details below.
1 ) Machine Brand and Model (PC/Laptop):
Code:
2 ) Wireless Brand, Model and Wireless Chipset:
Code:
3 ) check interface:
Code:
4 ) Check for modules:
Code:
5 ) Kernel boot messages
Code:
I never had this problem with Ubuntu before and I am now confused. This is a clean install and I have not change anything about my AP so don't why this is happening.
Every 5min or so my wifi keeps disconnecting and sometimes have problems reconnecting. I also have Windows on this machine and it does not do this at all. My AP is set to channel 9(changing it makes no difference), WPA2. Logs below
Code:
[ 15.668746] alloc irq_desc for 33 on node -1
[ 15.668748] alloc kstat_irqs on node -1
[ 15.668768] iwlagn 0000:02:00.0: irq 33 for MSI/MSI-X
[ 15.696615] alloc irq_desc for 22 on node -1
[Code].....
I have a Synology home server at home. I have a laptop with Linux Mint 8 (Helena) installed. I can access my server's shared files using LAN through Places>Network>Windows Network>Workgroup>Server>Shared files. I can also access the files through a web browser. Samba is installed. The problem is when I use the wireless lan of my laptop, I cannot access the server and the files anymore locally even through a web browser.
I tried Connect to Server through Windows Share but what I get is "Could not display "smb://server/".".
Its been like this since fedora 12, in fedora 11 its no problem, i hope it will be fixed in fedora 13 and i am waiting..., and after fedora 13 released the problem is still the same...
I use Intel 3945ABG. wifi connect with no problem and after few seconds its disconnected, and re-asking my saved password (which is stupid since i save the password so fedora won't ask me that stupid question again).
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View Related-i have a HP Pavillion dv6 entertainment pc laptop -im using ubuntu 10.10 -my wifi indicator keeps flashing -before when i was using fedora this was not happeneing -and now some times in between wifi disconnects and doesnt connect back -only after restarting it connects back -anyway its not disconnecting very frequently -but when i put something for downloading in the night, morning i can find it incomplete as wifi got disconnected -same time my netbook using windows xp keep working and connected
View 2 Replies View RelatedUsing a USB ISO, I recently installed Debian 8.0 Jessie (64-bit, Xfce DE) to a new computer. I usually lose my Wifi connection after 1-3 minutes when donwloading/uploading at around max. speed 4 Mbps/512 kbps. Sometimes it will last 15+ minutes.
When lightly browsing it can usually stay connected for 15-30 minutes. I have to disable and enable Wifi using NetworkManager to connect again. If I remember correctly, there were problems with the Wifi connection even during the installation of Debian.
This Wifi USB adapter works fine on my old computer with Debian 7.7 (32-bit). No problems with the Wifi connection yesterday on my old computer during 10+ hours of activity.
This Wifi adapter also works fine on this new computer when I boot from a live USB (Rescatux 0.30.2) downloading and uploading at max. speed for 1+ hour.
I already tried some suggestions I found online, but they didn't work:
* changing Wifi channels between 1, 6, 11 in my router settings
* changing WPA-WPA2 to WPA2 in my router settings
* ignore IPv6 in NetworkManager
* change probe_wait_ms from 500 ms to higher value by adding Code: Select alloptions mac80211 probe_wait_ms=1000 or Code: Select alloptions mac80211 probe_wait_ms=3000 to /etc/modprobe.d/mac80211.conf and rebooting
* disable Power Management for Wifi adapter (not supported)
* ...
I can also post the output of commands from Rescatux or my old computer if needed.
Output of commands on Debian 8.0 64-bit (I edited out some info, MAC, ...; not sure if that is important):
Code: Select alluname -a
Linux d8lnx 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64 GNU/Linux
Code: Select alldmesg
...
[ 291.292408] ieee80211 phy0: wlan0: No probe response from AP XX:XX:XX:XX:XX:XX after 3000ms, disconnecting.
[ 291.459825] cfg80211: Calling CRDA to update world regulatory domain
[ 291.462030] cfg80211: World regulatory domain updated:
[ 291.462033] cfg80211: DFS Master region: unset
[CODE]....
On wheezy 32-bit on thinkpad x40
Code: Select all# tail -30 /var/log/messages
Sep 15 11:52:12 X40 kernel: [ 146.227644] cdrom: Uniform CD-ROM driver Revision: 3.20
Sep 15 11:52:13 X40 kernel: [ 147.005390] UDF-fs: Partition marked readonly; forcing readonly mount
Sep 15 11:52:13 X40 kernel: [ 147.017161] UDF-fs: INFO Mounting volume 'Utility_HD-PXTU', timestamp 2010/05/12 14:24 (11e0)
Sep 15 11:52:14 X40 kernel: [ 147.821237] NTFS driver 2.1.30 [Flags: R/W MODULE].
Sep 15 11:52:14 X40 kernel: [ 147.919521] NTFS volume version 3.1.
[Code] ....
It will be okay for awhile after I unload & reload ipw2200 driver
Code: Select all# lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI can not connect to wifi networks, i can see them but not connect.
My wifi device is:
My Netbook is ASUS EeePc HA900, I already use Ubuntu 10.04 is ok, nothing problems, then I upgrade to Ubuntu 10.10, it is still Ok. But when I upgrade to ubuntu 11.04, it have problems with Wifi, when I connect Internet via Wifi, just input the Password, it make my computer slow to halt, and have to turn the power off to shutdown the computer.
View 1 Replies View RelatedI have installed Xubuntu 10.4 (Lucid) on a PC at my uncle's. He is the happy owner of a Netgear wg121 wireless usb-adapter.
I have followed the instructions concerning installation of the ndiswrapper here:
[URL]
The wg is up and running and everything seems to work perfect... except that, when I reeboot and log in, I have to issue the following commands again, to make the network initialize the wep-encrypted connection. If I do not issue these commands, the wifi-part of the Xubuntu network manager (I don't know the exact name of the program) is invisible in the menu or anywhere on the desktop. (It just says no network where the wifi should be appended). But when I issue these commands in a terminal, then the adapter (wg121) opens and connects to the network:
sudo depmod -a
sudo modprobe ndiswrapper
I have tried the command:
sudo ndiswrapper -m
in order to make Xubuntu connect automatically on opening, but no success. When i look through the log it says something about a .conf file, but not which and how, so I'm a bit lost.
Having played around with ubuntu a fair bit I decided to breathe life into an old thinkpad with a pcmcia wireless card, by following the minimal install instructions and using lxde window manager etc.. Everything works fine apart from the fact that I cannot connect wirelessly. The card picks up and lists connections but whenever I have clicked on a connection the dail spins and then it gives up.I installed network-manager and managed to get nm-applet appearing in the sysTray otherwise I would not even have known there was wireless connections there.
I was thinking there maybe some conflict with another network manager, does this sound likely?
I'm having an issue recently with Ubuntu 10.04 x64. Connecting to my wifi is not working. I believe it is some kind of issue with the router. On Windows 7 the only way that I could connect to the net was by copying the network profile to a usb flashdrive from another computer and loading it mine. The wireless signal just keeps attempting to connect.
View 1 Replies View RelatedI have Ubuntu 10.04 on my EeePC 1000H. I don't use this computer often but it has always worked before... I suspect an update did this to me. I've recently swapped wireless routers but all my other machines have been able to connect to the new router. I can see the SSID and the signal strength is high but when I try to connect to it, it just attempts for a long time then asks me for my password again. I am currently connected to wired network.
Code:
michael@michaelsEeeUbuntu:~$ nm-tool
NetworkManager Tool
State: connected .....
pan0 Interface doesn't support scanning.
I installed Ubuntu 11.04 yesterday and my wireless didn't work so I searched a little and found a way to make it work; Uninstalled bcmwl-kernel-source and installed firmware-b43-lpphy-installer and b43-fwcutter. And it worked. But today I accidentally pressed the "turn off wireless" button on my laptop. I obviously pressed it again and thought it would work but it doesn't. Now I find networks and stuff but I can't connect to them. It tries for awhile and then asks me to enter the password which I do (it is correct) and then it tries to connect for a few minutes again and then it asks me for the password again.
Some info:
Code:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
[Code].....
I'm having a problem to connect to the network at home via wifi, open or protected. Using ubuntu 11.04, attached are more details. I've managed to get a successful connection on an open network at work.
View 7 Replies View Relatedis it possible to connect to my internet router from the console? for some reasone my gnome envirment removed and i want to install it again.
View 5 Replies View RelatedI can connect to my home WiFi connection with no trouble at all.
I can't connect to a free public WiFi (like at a library).
i am tryin to connect to internet through wifi. for this i have to connect to router first and then open the web browser to put UN and PW. I am using ubuntu. i know UN and PW. I can connect to router but my(any) web browser cannot open the authentication page.
View 3 Replies View RelatedI have a 2wire card and gateway how do I install it and connect to the internet?
View 2 Replies View RelatedI have a good connection with 9.04 but when I upgrade it to 10.4 the network keeps looking for wiFI. I have a Linksys USB adapter 2.4HZ.
View 8 Replies View RelatedI just installed the XBMC from the XBMC live CD. I want to configure it in a way to auto-connect to internet. (my router is wpa-password protected.)
i know how to save the password and auto connect to internet from gnome GUI but not how to do it from command line. what should i install, change or configure in order to auto connect to internet? (using command line)
I am running 10.10 on a Toshiba NB255 netbook. Wireless works find for me at home and worked last week at a hotel. At home I just use WEP, and my office network uses WPA. I can connect just fine from my work laptop but not from this netbook. The network shows up fine in the network manager and it asks for the WPA password, but doesn't establish a connection. Every once in a while it will say it is connected and has full strength but I can't ping anything, and within a minute or so it drops again. IIRC yesterday it connected via wireless and actually worked for maybe a minute before dropping at it hasn't worked since. Like I said, this has worked on other wireless networks.
Here is some output from dmesg:
Code:
[55086.034476] wlan0: authenticate with 00:15:62:ff:6e:89 (try 1)
[55086.037598] wlan0: authenticated
[55086.037658] wlan0: associate with 00:15:62:ff:6e:89 (try 1)
[55086.041880] wlan0: RX AssocResp from 00:15:62:ff:6e:89 (capab=0x431 status=0 aid=4)
[55086.041891] wlan0: associated
[55089.045810] wlan0: deauthenticated from 00:15:62:ff:6e:89 (Reason: 2)
[55089.079974] cfg80211: All devices are disconnected, going to restore regulatory settings .....
So recently we switched Internet Providers. While we had Bellsouth, my laptop would connect to our wireless internet flawlessly everytime. However, we just switched to Charter because it was both cheaper and faster. But now, my laptop will not connect to our wireless. If I hook it up to an Ethernet cord, it connects just fine. I believe they gave us a new modem/router or whatever it is that sends out the wifi signal.
I have tried to connect with this laptop on Ubuntu, Linux Mint, and Backtrack 4. On Ubuntu and Linux Mint, after I enter the correct WEP key, it sits there and tried to connect for a minute or two, but then the window pops up asking for the WEP key again, even though it's still filled out.
When I tried connecting on Backtrack, it told me that it could not obtain an IP address.
I think I have unique problem. I have a d-link DWL G510 rev c.(Austrailian) WiFi card in my pc which is detected as
Quote:
Network controller [0280]: RaLink RT2561/RT61 rev B 802.11g [1814:0302] in lspci -nn.
iwconfig shows:
Quote:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSIDff/any
Mode:Managed Access Point: Not-Associated Tx-Power=6 dBm
Retry long limit:7 RTS thrff Fragment thrff
Power Managementff
ppp0 no wireless extensions.
Now sometimes it detects my wifi router and shows its ssid in nm-applet. but when I try to connect, it tries for 3 or 4 minutes and then fails. for most of time it even does not finds my router.
about 90 percent of the time, i cannot connect to the internet. i click on the icon and select the network, but for some reason, instead of saying, "connection established", it says, "you are now disconnected."
View 2 Replies View RelatedWireless adapter is working OK because I can connect when network is unsecured, but when I try to connect to the secured wifi it just won't accept the password.
I can see available networks in Network Manager but can not connect. No error messages, just no connection.
Is there anything I can try to enable connection to the WEP secured router?