Fedora :: Can A Removable Block Device Be Always Recognized With Same Name
Apr 7, 2010I have an external hard disk drive and I would like it to be recognized with the same name (e.g. /dev/sbd) after each boot.
Is there any way to make that?
ADVERTISEMENT
General :: External Hard Drive Is No Longer Recognized - Buffer I/O Error On Device Sdb1, Logical Block 6160408
Feb 28, 2010The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive.When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message.
[19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21
[19712.145347] usb 2-2: configuration #1 chosen from 1 choice
[19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices
[code]....
I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external hard disk.
General :: Use A Removable Device In CentOS?
Sep 25, 2010I knew how to mount it and I was able to view files and folder in it but I don't know how to copy files using CUI (Command not GUI) mode. I have six separate iso files and I want to make a DVD in the removable device.
View 1 Replies View RelatedCentOS 5 :: Move To A Removable Device
Sep 20, 2010I have an External HDD which has a Data directory in it and I want to move to this directory to use the script mkdvdiso.sh to combine six separate iso file (of CentOS, of course). The syntax of this script is:./mkdvdiso. sh /source /destination/DVD.iso.I don't know what to replace source and destination parameters with.
View 5 Replies View RelatedFedora :: Kernel: Buffer I/O Error On Device Dm-0, Logical Block 124
Nov 28, 2009I have 2 hdds, with encrypted / and /home. Besides there are four other (encrypted ext4) partitions I use rarely. In Fedora 11 at boottime I gave the luks passphrase for / and home and the system booted as intended.
Whenever I needed those extra encrypted partitions I mounted them in Nautilus. Now, in Fedora 12 at boottime dracut tries to open all the encrypted partitions, / and /home are mounted fine, but opening all the other partitions gave the following messages in messages.log:
Quote:
dracut: luksOpen /dev/sdb6 luks-02a0e706-a26f-4019-a2a0-88a0366a994d
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: device-mapper: ioctl: unable to remove open device temporary-cryptsetup-304
kernel: Buffer I/O error on device dm-0, logical block 124
kernel: Buffer I/O error on device dm-0, logical block 124
[code]....
...and these messages are repeated with the other partiitions, and the boot time takes very, very long. How can I tell dracut to ignore those extra encrypted partitions at boottime?
General :: Get Fstab To Auto-mount A Removable Device?
Feb 23, 2010I'm trying to get fstab to auto-mount a removable device when its plugged in? Is this possible and if not what is the easiest way to auto-mount a removable device?
View 3 Replies View RelatedFedora Installation :: F10 Live CD Buffer I/O Error On Device Sr0 Logical Block?
Jan 29, 2009Create symlink /dev/root and then exit this to continue the boot sequence.
Buffer I/O error on device sr0, logical block *******
sr 4:0:0:0 [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sr 4:0:0:0 [sr0] Sense Key : Medium Error [current]
sr 4:0:0:0 [sr0] ASC=0x10 <<vendor>> ASCQ=0x90
end_request: I/O error, dev sr0, sector 1395920
Clocksource tsc unstable (delta = -499902943 ns)
loops that during install. new hard drive fresh out of box. WD 320GB 7200 Toshiba Qosmio intell core duo i've installed with this same disk before previous hard drive died. installed over windows vista. this time im trying to install solo no windows disk to reinstall with, F10 only. I've tried other distros as well, Mandriva one 2009, Dreamlinux, and this one. i've suspected hard drive controller went out but i can format and partition the drive. also the cd/dvd drive is bad but im booting from cd fine. tried removing the cd drive and booting from an external usb cd rom, same errors.
im about to deploy and need my computer up and running ASAP. 7 months no entertainment is not good. when i use a linux boot disk from Ultimate Boot Disk (UBD) i get an error of - hda status no response and something about invalid heads dreamlinux pushes past the error till i get the error about cant start x server. about my graphics
OpenSUSE Hardware :: Removable Device Not Detected By Its Notifier - Dolphin / Sort It?
Sep 5, 2010I upgraded from 11.2 to 11.3 yesterday, using a 64-bit Dell 1535 laptop.
With the new version, I find that the Device Notifier no longer detects my mp3 player through any of the USB ports. Neither does Dolphin.
Similar threads that I've read through have not done the trick.
Fedora Installation :: Livecd Cant Burn Correctly / Buffer I/O Error On Device Sr0 Logical Block 352328?
Oct 3, 2009i've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:
BUFFER I/O error on device sr0 logical block 352328
and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me
Fedora :: Cannot Open Root Device "<NULL>" Or Unkown-block(202,17)
Jun 21, 2009VFS: Cannot open root device "<NULL>" or unkown-block(202,17)
append a correct "root=" boot option
Kernel panic not syncing
VFS: unable to mount root FS on unkown-block(202,17)
I have a Dell xps with a dual core, 8 gigs ram, a primary hard drive with vista on it, and a secondary with linux in its future. It starts loading vmlinuz but ends up with the kernel panic before anything else. I am able to install earlier cores (5-8) and vista recognizes the ram just fine.
Fedora Installation :: No CD Block Device From LiveCD, Then "unable To Find A Medium Containing A Live File"?
Sep 12, 2010the message on the title only happens with Ubuntu. In Fedora, it just stops booting from LiveCD with "WARNING: Cannot find root file system!". The rest of the symptoms are the same.I'm trying to install Fedora LiveCD on an IBM i Series notebook (model 1161-21X). It's a Celeron powered unit with RAM expanded to 512MB. It has a 10GB HDD, and an internal CD-ROM drive. Although it has two USB ports (1.1), it cannot boot from a USB drive, so no pendrive nor external CD unit solution possible.When I boot from LiveCD, it stops booting with the message above. Looking atsg, there's no CD-ROM driver loaded. Also, there's a char device for sg0, but no block device for it, so no way to mount it. It seems that the driver module has been removed from the kernel. I'm currently running Fedora Core 5 in it. This very same problem happens with any Ubuntu newer that 6 or any Fedora post 7.
View 2 Replies View RelatedProgramming :: Block Device Driver ?
Nov 30, 2010Is there an easy example of a block device driver I could follow as a guide to write my own module?
View 5 Replies View RelatedGeneral :: Fake Block Device For Testing LVM?
Jun 1, 2010I want to test LVM+Raid. When I was testing ZFS on Solaris, I was able to create regular files, and use those as disks for testing.I tried creating a regular file full of zeros w/ dd, then partitioning that. fdisk seemed to be able to create a partition on the regular file, but mkfs and parted couldn't work with it. Is there any way to create fake block devices for testing?
View 4 Replies View RelatedGeneral :: /dev/sdd1 Is Not A Valid Block Device?
Jun 14, 2010When I try to mount the /dev/sdd1 device then it give errormount -t ext3 /dev/sdd1 /4hdmount:/dev/sdd1 is not a valid block device
View 9 Replies View RelatedSoftware :: Not A Block Device Error In RHEL 5
Apr 25, 2010I created LVM and formatted it. But at the time of mounting it getting this error message ".....not a block device".
View 3 Replies View RelatedProgramming :: C Program - Getting The Raw Size Of A Block Device
Oct 16, 2010How do you go about getting the raw size of a block device under Linux from within a C program? And I mean the raw size of the block device itself, not a file system that may or may not be installed on it. And I'd like to be able to get the raw size of any block device, from hard drives (e.g., /dev/sda) to LVM partitions (/dev/mapper/vg0-home) to loop devices to anything else that is a Linux block device.
View 3 Replies View RelatedDebian Installation :: Wireless Device Is Not Recognized
Feb 25, 2016I have a 2016 Lenovo (ideapad) 500-15ACZ laptop, and just replaced Windows 10 with Debian 8.3. I can't get Debian 8.3 to recognize the wireless device. The device isn't defective, for it works on Windows 10. The Windows 10 driver is called "WLAN Driver (Atheros, Realtek, Broadcom) 12.0.0.116_ 7.35.295.2_2023.1". Here's the output of "lspci":
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 9874 (rev c5)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
[code]....
Ubuntu :: HDMI Device Not Recognized In Aplay -l
Aug 10, 2010After solving the problems:
- HDMI device not recognized in aplay -l
- upgrading Alsa to 1.0.23
- multiple HDMI devices installed
I now have an ubuntu laptop where
1) aplay -l outputs
[Code]...
Ubuntu Security :: Block Device By Bluetooth Address?
Apr 22, 2010Is it possible somehow to block some bluetooth device with specif address (mac) ?
(like iptables block by mac)?
Programming :: Send Block Device Name To Bash Variable?
Feb 13, 2009I'm setting up a machine that's going to be used to test randomly connected tape drives one at a time, and as such, I'm writing the test routine using mt in a bash script, for user-friendliness. The problem is the block device name changes on occasion as tape drives are swapped out and busses are rescanned, so I can't "hard code" a block name into the script.
I know programs like lsscsi and hwinfo will give you block device names as part of their output, but I can't seem to grep anything in such a way as to have the final output be just the block name (ie /dev/st2, or optimally 'st2'), so that I can just have the script read said output, and drop it into the necessary variable.
Hardware :: Block Device Names Change After Reboot
Jan 19, 2011I built a Raid5 volume with 3 SATA II hard disk drives. Further I have a system disk conected through IDE. During the first setup the IDE disk becomes sda, the SATA II disk sd[bcd] respectively. Now, sometimes the device names change after reboot - why ever... E.g. one of the raid5 disk become sda and so I got an error message during the boot procedure regarding the raid set. Curious, when the system is up and I stop and restart the Raid5 volume it comes up and runs fine. Because I'm currently at work I can't post any more detailed config files at the moment.
View 2 Replies View RelatedHardware :: Buffer I/O Error Device Hdc Logical Block 15
Jul 4, 2011I am trying to debug the issue of a desktop that has for the last two weeks started having kernel panics at boot time. This machine has been running flawlessly for the last 8 years, and has had three OS upgrades. I am using memtest to try to understand the issue. The following is part of the memtest output: Reading all physical volumes Buffer I/O error device hdc logical block 0 Buffer I/O error device hdc logical block 15
Illegal node for this track or incompatible media (asc=0x64 ascq=0x00) The failed "Read 10" packet command was /dev/hdc: read failed after 0 of 4096 at 0 Input/output error and similar set of mesaages After this udev checks correctly, and hardware, storage and audio are initialized However sometime in the middle of the boot process, a kernel panic occurs with message Kernel panic -- not symcing : Fatal exception in interrupt
General :: Handle Bad Block In Mass Storage Device?
Nov 2, 2009* I am implementing mass storage device on a test board.
* It contains NAND flash.
* Using corresponding "udc driver" and "g_file_storage" I could make my test board enumerate as mass storage device on my Linux machine.
* my 16 MB pen drive (test board) is now ready for read/write.
But there are some Bad Blocks on the NAND.Hence copy is not complete. Although on Linux machine there is no error message. Now , what is there in a normal pen drive which manages the Bad Block or what am I missing so that such Bad Blocks are managed.
Here is the error I get on my test board :
mtdblock: erase of region [0x2c0000, 0x4000] on "Bon 2" failed
end_request: I/O error, dev mtdblock2, sector 5664
Buffer I/O error on device mtdblock2, logical block 708
[code]....
Server :: Mount - Block Device Giving Read Only
Mar 15, 2011I want to keet some data on windows dir. I have tried the below command and giving the below error.
[root@xyz0044 ~]# mount -t cifs //10.48.64.52/jata -o username=domainv.kumar3,password=xxxx /mnt/backup
mount: block device //10.48.64.52/jata is write-protected, mounting read-only
mount: cannot mount block device //10.48.64.52/jata read-only
Server :: RHEL5 ISCSI Not Creating New Block Device In /dev
Jul 9, 2010I am running RHEL5.5 its a fresh install and we are testing Xen Virtualization. We are wanting to use our iSCSI SAN for the VMs. I have created the initiator iqn, and discovered the target address. We are connected to the target, but there is no new block device in /dev.
[root@xxxxxxxx etc]# netstat -a | grep iscsi
tcp 0 0 *:iscsi-target *:* LISTEN
tcp 0 0 xxxxx-netapp.okc-:44840 xxxxxx-iscs:iscsi-target ESTABLISHED
tcp 0 0 *:iscsi-target *:* LISTEN
[Code].....
Programming :: Block On Write Call To TtyACM Device
Nov 1, 2010I have a write call to a ttyACM serial device that blocks after several hundreds bytes are written.I'm writing in ~25 byte chunks, so I have 5-8 successful writes, then the next write blocks forever.I can bypass the blocked call using select, but I can never call write again without closing and re-opening the port.
The serial port is opened correctly because I can read from it just fine. Write permissions are correct, and it's opened RW.The code is likely correct because I tested the same code using the same device on a pure RS-232 serial port, and it worked fine - no block. Is there anything to know about the linux ACM module?It's my understanding that write calls basically shouldn't block.They're supposed to return -1 if there's an error.
Ubuntu Networking :: Verify Whether A USB Device Is Recognized As A Modem?
Mar 4, 2010I am running Ubuntu 9.10 KK (UNR) on my Netbook and I use the Huawei E5830 as UMTS modem. I can connect to the E5830 through WiFo (no problem at all) and USB. How can I verify whether the E5830 is recognized as modem when connecting it to USB? It changes the mode from USB storage device to USB modem, however I think I can not access it as a modem.
View 9 Replies View RelatedUbuntu Networking :: No Ethernet Connection Recognized - No Such Device
Jun 17, 2010I just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
OpenSUSE Install :: How To Browse 11.3 CD - Block Device Write Protected
Jul 15, 2010I can browse the iso image easily enough with a loopback mount, but when it comes to mounting the actual CD (which I did first), I get:
Code:
$ sudo mount -t udf,iso9660 /dev/dvd /mnt/dvd
mount: block device /dev/dvd is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/dvd,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
/var/log/messages isn't very helpful, either:
Code:
Jul 15 15:15:56 bkorb-dt kernel: attempt to access beyond end of device
Jul 15 15:15:56 bkorb-dt kernel: sr0: rw=0, want=68, limit=4
Jul 15 15:15:56 bkorb-dt kernel: isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16
$ md5sum openSUSE-11.3-DVD-x86_64.iso
adf5d2a0a03c1e3aaf102fd6a4771b87 openSUSE-11.3-DVD-x86_64.iso
I burned it with K3B and it gets the same result trying to mount it. K3B seems to know that the image is an iso9660 and is able to display the various 9660 id fields just fine. It just won't mount.
Ubuntu :: Buffer I/o Error On Device Loop0 Logical Block?
Jan 13, 2011i have a inspiron 1520 laptop which is starting to slow down some so i thought linux would help because all i do is internet use, so i download it from another computer and mount it to a usb flash drive like the site says, (netbook remix latest version) then i put it in my laptop and it loads all the way and i press try and after about 10 minutes of loading it lets me try. so that was ok really slow but i thought id install it to hard drive to see if it improved speed. so the next time i start my laptop i get Buffer i/o error on device loop0 logical block xxxxxx so i redo the usbflashdrive no errors switch usb ports and same thing, ive done the switch usb ports and redo the flash drive about 4 times im really getting mad at linux before i even have it installed.
View 1 Replies View Related