Ubuntu Networking :: Setup A Router With Firewall?
Feb 9, 2010I want to setup a router with firewall on ubuntu box that will connect windows pcs one serving as outside source and one serving as inside target.
View 2 Replies
ADVERTISEMENT
Security :: Firewall Infront Of Router Setup?
Mar 9, 2011I am trying to setup a firewall using Centos 5.5. The machine has 2 NICs, one connecting to the ISP/Modem and the other connected to a DIR-655 wireless router. The nic is connecting to the internet port on the router.
I do not want DHCP on the Firewall machine but on the wireless router.
[ISP/Modem]<--->[machine eth0]<--->[machine eht1]<--->[DIR-655 internet port]
IP from ISP Dynamic 192.168.1.1 192.168.1.2
IP's on the DIR-655 LAN will be 124.168.0.0/24 network lets say.
I have setup routes on the eth0 192.168.0.0/24 and 124.168.0.0/24
and added 124.168.0.0/24 to eth1.
I can ping eth0 and eth1 but cannot ping 192.168.1.2.
this setup is not actually connected to the internet so I disabled iptables to try testing the ping and still no good.
Networking :: Setup Firewall / Sys1 Is Not Connected To Firewall For Testing Purpose?
May 18, 2010I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
IP : 192.168.2.1 ,
gateway : blank
dns1 : blank
dns2 : blank
sys2 firewall ,IPTABLES )
code....
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
Networking :: Network Setup - Router - Wireless Router Card ?
Apr 24, 2010I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
Ubuntu Networking :: As Firewall - Router With Aircard - Wwan
Apr 23, 2010I have seen tutorials on setting up a secured firewall/router/gateway using ubuntu server as the platform. However, I am wondering if anyone has had experience with using an aircard (wireless broadband card via usb) to set up a router.
Which card do you recommend? Any precautions? Any specific code already written to automatically recognize mobile broadband cards and restart the connection if it goes stale?
Ubuntu Networking :: Setting Up A Router And Firewall For 10.10 Server 64-bit?
Jan 28, 2011post the "perfect" tutorial for setting up a router and firewall for Ubuntu 10.10 Server 64-bit? I'm kind of a n00b when it comes to Linux, so I get really confused with some things, I have seen things on the ubuntu wiki about this... but it really confuses me =
I'm trying to setup my ubuntu sys as a router and firewall... Internet -> Ubuntu (Router) -> Switch (no DHCP on it) -> Computers I've already setup bind and dhcp3 and got those working perfectly... I've also setup Squid3 and Dansguardian for content filtering (blocking ads and such) and got them working too... I want to set it all up to be transparent, and allow the system itself to function as a powerful firewall router, giving absolutely NO issues to client computers connected, and no speed reduction at all.... I want to setup the firewall to allow all outgoing connections, but block everything incoming (stealth the network)... Forcing all http/s traffic to pass through dansguardian, then to squid...
But am very confused on how to pull this off... The system is running Ubuntu 10.10 Server 64-bit, with 4 GB of RAM, 320 GB SSD, and two 1Gb NIC cards... Sorry if I'm not very clear, I do speak english perfectly, but just kinda new to the "Linux world", I was using SONICWALL but that's getting a little too costly to my network and wanna do a free alternative... Something completely CUSTOM, not using some network security distro.
Ubuntu Networking :: How To Set Up A Gateway/router And Firewall On Server
Jul 20, 2011I want to do is setup a gateway(or router, idk what Ubuntu refers to it as.). So my set up would be Modem>Server>Switch>Router. I know that I need to set up it up as a DHCP server as well. I would also like to setup it up as a firewall too. I already have two Gbit cards that are already configured. So how do I do this? I already tried one tutorial, but it was old and was for Debian. I also installed ebox, but I couldnt figure that out either.
View 2 Replies View RelatedNetworking :: Capture And Log All LAN Traffic - No Access To Router Or Firewall
Jun 10, 2009I am looking for a solution for our LAN traffic monitoring and would like to use some opensource linux application. I have a linux box with two NIC cards and what I thought is the following: Our setup is as follows. Internet comes in through the router and into the firewall. From the firewall it goes into our switch and distributed among the workstations.
I have no access to the router or the firewall as they are centrally configured. I would like to place a device into the loop through which I could monitor the LAN traffic.
Can I put a linux box between the firewall and the switch and have all packets going through registered and logged? I have a proxy server (non transparent) and that captures some but not all. I would like to get all packets registered without interfering with the LAN etc.
Networking :: Building Router Equipped With Firewall And Acl Management?
Jul 6, 2010I am trying to do my graduation project, it's labeled under "linux secure router", and I should build a linux based router equipped with firewall and ACL management...Some people advice me to use linux ubuntu distribution todo this I try to do that but I don't know where to start form
View 3 Replies View RelatedNetworking :: Firewall As Router - Pros Versus Cons
Jan 27, 2010I'm mentoring my local high school's IT club as they prepare to participate in a cyberdefense competition (see IT Olympics). Generally we are given four boxes and need to set up a network that provides certain services (which services change from year to year, but usually include a web server, email server, FTP server, and an application server of some sort) and support client PCs that connect from the WAN. The red team then tries to break into our network to steal "flags" from our servers and to set their own "flags" on our servers.
Generally we set up the firewall with two network interface cards (one to the WAN and one to our LAN), and connect the LAN NIC to a router, which then connects to the other three boxes. But we do have the option of installing additional NICs in the firewall and configuring it as a router. I can't shake the feeling that there is a security advantage to such a configuration, but I can't say what that advantage is. Perhaps something with configuring ipTables on the internal boxes to accept connections only from the firewall's NIC, and then only for the services we want that box to support (to prevent an intruder from connecting directly from one box to another)?
Networking :: Unable To Open Port In Router Or Firewall?
Jan 26, 2010I am trying to make a vnc connection from pc #2 to pc #1. Pc #1 is a debian pc behind a zyxel router (P-2602HW-D1A). Pc #2 is a windows xp pc another place at the internet.I have configured the zyxel router to forward incomming trafic on port 5902 to the local ip-adress of the debian box. The debian box is running a vnc server, listening on port 5902.But i dosn?t work.I have tryed to scan the zyxel routers ipadress on port 5902 from the internet, but the scanner says that the port is closed.The vnc server on pc #1 is working fine on the local network. I can connect to the server from a pc on the same side of the zyxel router.Is it deffenitly a router problem, or could it have something to do with debians own firewall?
View 2 Replies View RelatedUbuntu Networking :: Setting Up Network Firewall Using A Netgear DG834G Router
Jan 12, 2011could set up a firewall on my linux machine? I have is to connect my router wired to the linux machine and then from the linux machine to my main computer, and obviously routing the internet connection through the linux box as a firewall. I use a Netgear DG834G router
View 9 Replies View RelatedFedora Networking :: OpenVPN Timeout - Error From NetworkManager - Connect To My Router/firewall
Mar 13, 2011I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
Networking :: Setup My Firewall To Use Iperf?
Oct 27, 2009How do i set up my firewall to allow traffic from iperf?
View 6 Replies View RelatedNetworking :: Setup Firewall In Redhat V5+?
Mar 4, 2009I'm an it student and a newbie in linux OS.
We have this final project that we have to set-up
a firewall in a linux redhat OS which i totally have no idea ..
i did some research but haven't found the right one.
Networking :: Setup Iptables Firewall And DMZ With Multiple Public IP's?
Nov 27, 2008We have a new Bussiness DSL line with 16 public addresses.What we want is to setup a DMZ to run some services and internet to the LAN. Here's a schematic of what we want:
Code:
Backup Internet Main Internet
connection connection
| |
| |
SDSL Modem BDSL Modem
[code]....
The webserver has the following settings:
IP: 12.34.56.125
subnet: 255.255.255.240
gateway: 12.34.56.126
What IPTABLES rules do i need to setup to "see" all IP's in the DMZ-2 from the internet?
Networking :: Setup A Firewall In Home Network Environment
May 2, 2010I am attempting to set up a firewall in my home network environment. the rest of the environment is windows, sorry I am attempting now so bear with me. what I have is a cable modem coming in, then my fedora 11 box with 2 nics, then the wireless router and the rest of the network.
everything works fine until I put the linux box in. If I put the firwall in the firewall sees the internet but the wireless router directly after does not. I am doing something wrong with the dhcp I am guessing. I dont want the firewall to give the address to the network I want the router to. I tried to get the firewall to do it (yum install dhcp leafnode) but it kept saying something didn't work right.
so I figure I will let the cable modem give the firewall an ip and the router give the rest of the network their ip's but how do I get the firewall and router to see each other and allow passthrough?
Networking :: Setup Ubuntu As Router?
Apr 5, 2010how to setup ubuntu as router. i already try to setup but it doesn't work.
my situation is to create ubuntu as router. i have two network card etho and eth1. i want to create eth0 in DMZ and eth1 only can only access in internal.
Networking :: Trying To Setup Ubuntu Box As Router
Apr 3, 2011I have multiple devices in my garage that need internet connectivity. I have my main Netgear router inside the house. I have a computer running Ubuntu in the garage with dual NICs.
Here's a map of how I have it setup now: [URL]
Here's my /etc/network/interfaces:
Code:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.60
netmask 255.255.255.0
gateway 192.168.1.1
auto eth1
iface eth1 inet static
address 192.168.1.5
network 192.168.1.0
netmask 255.255.255.0
broadcast 192.168.1.255
I was trying to keep everything on the same subnet. Eth0 is the external NIC, connected to the router in the house. eth1 is the internet NIC, which would go out to the devices in the garage. Now, I know it would be easiest to just connect a switch up and run all the devices in the garage off that switch. But the switch I have is a 10/100, and my network in the house is gigabit, and I want the PC in the garage to have gigabit access... which is why I'm doing this dual NIC setup and using the PC as a router, then the other devices in the garage will be 10/100.
In addition, I used the shell script as described in this article: [URL] to setup iptables. I also uncommented the net.ipv4.ip_forward=1 line in /etc/sysctl.conf. What am I doing wrong here? None of the devices in the garage that I connect up to the Ubuntu PC are getting connectivity. None are getting a DHCP lease from the main router in the house. The Ubuntu PC itself has internet access just fine though.
Ubuntu Networking :: Can Setup The Server As A DSL Router
Nov 17, 2010I am planning to setup a home network with Ubuntu.the home network consists of ~3/4 computers; a mediaserver (reelbox) and 2 more PCs.Can I setup the server as a DSL router and get rid of my modem/router I have right now?
View 3 Replies View RelatedUbuntu Networking :: Setup A Static IP If Have No Router?
Dec 1, 2010I am trying to set up SSH so that I can edit files on a home server (linux). I know this question has been asked many times before, but none of the answers seem to apply to me.
Here's my setup. I have the modem connected to a switch (wired) that connects 2 PCs to the internet (one desktop, one server, both wired).
All of the threads I see that discuss static IPs seem to require that I set up a router. Is this necessary? Can I still transfer files through a switch?
Networking :: Setup Mutil ISP Router
Sep 8, 2010I would like to setup a Linux Router with Fedora. Here is what I have and would like to do...
Email filter device is on the LAN at 192.168.x.3. I need to provide SNAT to that device from both T1 interfaces...
All outgoing traffic will route through DSL except for traffic destined for addresses on either eth0 or eth1 (web sites).
I assume I would need the following:
I also assume I would need to setup iptables with FORWARDs for the 192.x.x.x networks to eth3.
What I am not sure how to do, is properly setup the incoming redirections so that the email filter can be access from both eth0 and eth1 by different IP addresses.
Ubuntu Networking :: Setup As Router Box And WiFi Hotspot?
May 12, 2010I've got an Ubuntu box set up as a router and wifi hotspot. I can access the internet and any website using this box. I can connect a laptop to my wifi access point, and connect to both the router box and the internet. I'm writing this message from it. If I access either hsbc Hong Kong internet banking or speedtest.net from my laptop I can't connect. Every other site I've tried is fine. What could be causing this? I don't know where to start. I've set up the firewall rules and routing tables, so I vaguely know what I'm doing... but clearly not enough to debug this issue.
View 3 Replies View RelatedNetworking :: Setup Laptop Running Ubuntu 10.04 Into Router?
Jun 18, 2010\How can i setup my computer (currently running Ubuntu 10.04 lts) into a router so that other laptop can have a wireless connection to it and be able to access the Internet?
View 4 Replies View RelatedUbuntu Networking :: Setup Server As Router / Gateway?
May 29, 2011I have been searching google for a while now and have not found exactly what I am looking for. I would like to use my fresh install of ubuntu server 11.04 as my router/gateway for my home. I am not an expert at linux by any means but I can usually figure stuff out. I believe I need iptables, bind, and a few others probally. It eventually will also be a samba server but I have done a little with samba before. I do have 2 network cards, my router at the moment is starting to die and would love to have a more powerful router. I would also like to figure out how to do port forwarding in the router, as well as be able to see the load on the network cards. Maybe there is a program to show usage by user? As well as be able to do packet pritorization.
View 4 Replies View RelatedNetworking :: Setup Firewall / Gateway Address And Dns / Give To Clients For Accessing Internet?
May 12, 2010I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
Networking :: Setup A Router With Extended Range ?
Sep 12, 2010I want to connect to my office intranet without utilizing internet, there is aprox 210 ft distance and i cannot locate my N router's signal even when i installed the router outside of the building, the server is redhat enterprise, and want to share filehosting and internet with the office to cut down costs.
Office building with intranet>--------<210ft>----------my apartment
I am willing to invest some money in this setup but undecided how to extend the network, someone told me i can use a router in repeater mode but i cannot find any such router, my employer has allowed me to use the office network (so nice of him) but at my own setup.
Ubuntu Networking :: Netgear N600 Wireless Router Setup With 11.04?
May 18, 2011how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.
View 1 Replies View RelatedCentOS 5 Networking :: When I Change Dom0's Firewall Setup, The DomU Will Fail To Connect To Internet?
May 17, 2010I'm using virtual network (NAT network) for my domU.When I change dom0's firewall setup, the domU will fail to connect to Internet anymore.So far, the only way to bring the network back is reboot dom0 !I try to restart service network and libvirtd on dom0 ... it doesn't work.How can I bring the domU network back without reboot dom0 ?
View 1 Replies View RelatedNetworking :: Setup Pxe Server Routed Via Standard ASDL Router
Apr 2, 2010I have searched google, but can't really get the hang of setting this up.Most howtos are setting up a DHCP and PXE on the same box. At the present my DHCP is done by my router and I want to set up the PXE server on my main PC.My router can re-direct traffic types based on ports (UDP or TCP) to an IP but can't do the bit about directing the pxe loader name (and I really don't want to ssh into it and start messing about there)If I redirect the port (what ever it may be, help required here) how would I go about setting up the Ubuntu PC to do the load and pass back to the PC trying to PXEboot?
View 1 Replies View Related
