General :: Utility To Forward Ports On A Simple Home Networking Wireless Router From Commandline Using Upnp?
Apr 8, 2011Is there a utility to forward ports on a simple home networking wireless router from commandline using upnp?
View 1 Replies
ADVERTISEMENT
Software :: Utility To Configure UPnP In A Router?
Feb 15, 2010I have a program called "PortForward" to do the job in Windows... But I've been searching for the better part of 2 hours trying to find one for Linux.
I can use the router's admin interface, but it limits the number of forwards you can add. And I would like to be able to add more simply because the applications I need to forward aren't already included.
Ubuntu Servers :: Firewall / Router Forward Ports
Sep 8, 2010I have linux server setup on a network with 2 interfaces. One (eth0) is connected to the regular network and the other (eth1) has a DHCP server and transparent web cache listening on it. The machines connected on the eth1 side are on a different subnet and the linux server is there gateway. Untrusted machines are introduced to this network to keep them isolated.
This isolation works well, too well. There are a small set of resources on the regular network I would like to make available to machines on untrustworthy network. I think I need to use iptables but alas I've had no luck in piecing together the command I need (in one case looking myself out and having to physically reset the machine).
Ubuntu Networking :: Get Wireless Router To Forward Ftp Requests To Computer?
May 18, 2010I'm trying to make my wireless router always give me the same ip address every boot (192.168.1.100). I do not have a static ip address from my isp.
Everything I've tried from online help has made my internet break and I'm not even sure what exactly I should be searching for on google.
Ultimately, I'm trying to get my wireless router to forward ftp requests to my computer which shares the network with an xp machine. I think this is the way to go about it.
Fedora Networking :: Finding A UPNP Port Mapping Utility?
Aug 7, 2009Wondering if there is a uPNP Port Mapping Utility available for Fedora. Something like this :
[URL]
The program seems to be Mac only tho.
Networking :: SSH - Forward Several Ports At Once?
May 10, 2011I can successfully forward a port via:
PHP Code: ssh -L 5900:localhost:5900 test@192.168.5.1
how do I forward several ports at once. This is a wrong example but:
[Code]...
Networking :: Add Wireless Access Point At Home Using Extra Router?
Nov 22, 2010The garage in my house is a dead spot for my current wifi router.I can't get a signal there.Moving my router within the limits of my cabling doesn't fix it. But I have two other routers I'm no longer using.Is it possible to use one of them as a wireless access point to extend the range of my current router?If so, what is the general procedure for doing that? My main router is a Verizon Actiontec M424WR. My other unused routers are a D-Link and a Netgear, both of which have wireless capability. The Netgear had a superior range, as I recall.
View 8 Replies View RelatedGeneral :: Transform PC Into Wireless Router For Home Use?
Feb 16, 2010I obtained some old PC and I've installed debian linux on it. Now, I have onboard ethernet slot (10/100) and net works fine. Into PC's usb slot I've plugged Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B Wireless 802.11g 54Mbps Network Adapter and I want to know is it possible to transform this PC into wireless router for home use? If so, what do I have to do?
View 3 Replies View RelatedOpenSUSE Wireless :: Access Files From When Connected To The Router With The Shareport Utility?
Apr 18, 2010Is there a way to make the (router's) USB port to work in OpenSUSE? I have a external HD were I would access files from when connected to the router with the shareport utility but it only works on windows. I was wondering if it could work in wine? And how could I do it?
And how can I make a network? I have never made a shared connection between computers. I don't know the correct term but I would like to share files with my brother and sister which I just converted from Ubuntu
Ubuntu Networking :: Configure Wireless From Commandline?
Mar 9, 2010How can we configure a wireless network from commandline in Ubuntu?
I understand iwlist will give us the list of access points.
Next using iwconfig it is possible to connect to a wireless network without network manager. connect to a wireless network using commandline?
Ubuntu Networking :: Use One Wireless Router To Connect/detect To Another Wireless Router?
Aug 1, 2010My son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View RelatedNetworking :: Cannot Ping Wireless Router Or Access Router Settings - Wireless ?
Jun 9, 2010I moved my server and network equipment, and now the wireless works but I cannot get my server online. I host a website, so this is kind of urgent.
I have a wireless router and can access the internet fine on my laptop. My server is wired & connected to the router. It sets up the networking properly.. ifconfig has an ip address, the default gateway is present. But I cannot ping google, or even the router. It says destination host unreachable.
So I go back to the laptop to check the router settings.. sometimes it likes to assign the server the wrong internal ip. But, I can't access the router settings either! The page (192.168.1.1) times out. Same with trying to ping the router. How can the laptop be online if it can't reach the router?
Oddly, ifconfig on my laptop reports an ip address starting with 99.233. It's always given me an internal address starting with 192.168. What's going on here? Is the router not allocating an internal ip? I use wicd to connect, if it's relevant.
We have a windows laptop that can only get a "local connection". Now it does sound like the router is forwarding directly to my laptop, instead of allocating internal ips.
General :: Forward The Port (22) Through Router For Server - Ssh
Feb 9, 2011Just setup an ssh server...kinda. I need to forward the port (22) through my router. I have forwarded ports before for programs so the whole thing isnt a mystery. But i need to know what to put in for a couple boxes.... Private ip: ? protocol type: tcp, udp, or both?
View 3 Replies View RelatedUbuntu Networking :: Setting Up Droid 2 (router) Ports?
Dec 28, 2010World of Warcraft requires that TCP Ports 1119, 1120 and 3724 are forwarded. The Blizzard Downloader requires that TCP ports 3724, 1119, 4000, 6112, 6113 and 6114 are forwarded. It can also benefit from having ports 6881 through 6999 forwarded. The World of Warcraft Voice Chat feature uses UDP Port 3724.
i use the hotspot feature to play warcraft and i am running ubuntu 10.10 ... i need to forward these ports ... any way to easily download an app to configure the phone like you would a router? its probably easy i just cant find it.
Hardware :: Home Built Wireless Router ?
Mar 21, 2011My network is running a cable modem (ISP), router, then I have a laptop that host some services (ftp, etc). It would be nice if I could build a small computer that could also have an WAP. That way I could have a wireless router and NAS, proxy server all in one.
View 4 Replies View RelatedUbuntu Networking :: Just Want A Simple Home Network
Jan 6, 2011As a user who is comfortable setting up a peer to peer network in Windows, how do I set up a simple peer to peer network with shares, on a standard network infrastructure (ethernet and basic dlink router), using Linux? I have two computers with Ubuntu 10.04, and would like to share files between them.Do I need to set static IP's? Why is only Windows network showing in Places/Networks?
Question two: I have 3 Windows computers (2 = XP, 1 = Win7) on my network, all with shares. When I try to access the windows shares from an Ubuntu machine, I can connect to some shares on some computers without being asked for credentials, however on other shares I am asked for credentials, but the credentials aren't accepted.I am assuming that domain = workgroup, so I enter in the workgroup name, but the dialogue refuses to let me in.
Ubuntu Networking :: Setup A Simple Home Network?
Feb 6, 2011I have three PC's. PC-1 is a newish Dell Vostro 320 running Win 7 as the prime OS with Ubuntu Linux 10.10 dual boot under the control of EasyBCD. PC-2 is a Dell Inspiron 6400 running Ubuntu Linux (10.10). PC-3 is an oldish Dell Inspiron 6000 laptop dual booting Win 7 and Ubuntu 10.10. All three PC's share a DSL connection to our ISP and network using the wireless router capability of the DSL box (a Billion 7401 VGP-M). All three PC's can access the internet using the DSL box both wired and wirelessly under Windows or under Linux. PC-1 is the primary PC and runs Win 7.
PC-2 (Ubuntu 10.10) is running fantastically well and can access PC-1 running Win7 as a member of WORKGROUP for print sharing and for file sharing. The primary PC-1 can also see the files on PC-2 as a member of a Windows WORKGROUP. Simple home networking is working as it should with this setup (PC-1 under Win 7 and PC-2 under Ubuntu 10.10). This has been like this since the installation of Ubuntu on PC-2, which included setting up network printing from PC-1 (Win 7) under Samba.
The problem is thus: If I boot PC-1 or PC-3 up under Linux, I lose all networking capability between the three PC's including print and file sharing, but they can all access the internet through wireless or wired connection. I have configured Samba and done all the home networking troubleshooting especially:[URL]..All to no avail. As I said, my aim to ditch Windows and move all three PC's to Linux but I can't do this unless I can get Linux home networking working properly. By properly, I mean all PC's running Linux or two under Linux and one under Windows 7 and be able to share files and a printer attached to PC-1. I am a Linux virgin and am hoping that a knowledgeable person can tell me what's going wrong and point me to setting up a simple home network under Linux. It shouldn't be this hard.
Networking :: Setting Up Linux Box As IPv6 Router To Replace Netgear WNR1000 Wireless Router?
Jun 18, 2011I want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
OpenSUSE Network :: Connect Wirelessly To A Home Router But Cannot Use The Wireless In Any Other Way?
Apr 14, 2010I am running openSUSE 11.2 and just recently my network has been down. I'm using Gnome, but using Yast to configure my network (I'm usually forced to use wireless as I travel a lot on my laptop). Usually, when I'm connected to a wireless network, it will show up as so in the Gnome start menu, but recently, it will only say Wired there, even though I have nothing connected to my ethernet jack. I can connect wirelessly to a home router, but cannot use the wireless in any other way. I have tried manually disabling the ethernet connection to no avail. Unfortunately I am limited in my linux knowledge, so I am kinda stuck here.
View 1 Replies View RelatedUbuntu :: WUBI Wireless - Unable Connect To Home Router
Jan 19, 2011I just installed WUBI and tried to connect to my home router but am unable to. I can connect to nearby unlocked routers, but am unable to connect to mine which is WPA-PSK [TKIP]. Also, this is the first time I've even seen Ubuntu
View 4 Replies View RelatedNetworking :: Network Setup - Router - Wireless Router Card ?
Apr 24, 2010I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
Ubuntu Installation :: Forward Ports When Using Debtorrent?
Oct 24, 2010I set up debtorrent on all my machines on my LAN, which is a varied mix of machines, including one Karmic, one Lucid, and a Debian Squeeze. These are behind a NAT-based firewall. I'm not sure if I'm getting any benefits from the bittorrent peer-to-peer features because I am not forwarding any ports.
Does anyone have a similar configuration? How does one deal with debtorrent on multiple machines? Does it really help if ports are forwarded? If forwarding helps, does one need to segment the forwarded ports for each different machine?
General :: Wireless Networking - Use Mint To Act As A Router?
Oct 7, 2010Can I use Mint as a Router service, similar to the service in Ubuntu (called: Router Advertisement Daemon?). Does Mint support this and what solutions are available for this?
Have dabbled in Linux very briefly, but almost no experience on how to install or find programs, so please explain in detail!
EDIT: I'm looking for something easy and simple, like what Virtual Router or Connectify does for Windows 7...
Networking :: Get The Wireless Router To Connect To The Other Wireless Router?
Feb 16, 2009This is my basic setup:
[URL]
I don't know how to get the wireless router to connect to the other wireless router so I can use internet on my computer. How do I achieve this wireless connection?
General :: Setup A Simple Home Server With Debian?
Jan 5, 2011I've decided to try and setup a simple home server with Debian. I can either install the OS on a compact flash card and use hard disks as storage, or just install everything on the hard disk. I'd also like to set up a software raid for mirroring. I've never done this before, and most recently updated documentation i've found is for ubuntu. Any advice or good links someone can point me to on how to set up raid? I'd like to encrypt my hard disks but I don't know what my options are. It seems like people point to truecrypt, but i'm wondering what else is out there or if people have any advice on this. Would it be feasible to do this if I install the OS on a compact flash card and?
View 3 Replies View RelatedGeneral :: Using Gnokii Utility - Copy Command As Copying Files To Home Is Not Allowed
Mar 16, 2011iam trying to send sms using gnokii utility in linux firstly i did sudo apt-get install gnokii after that i got a gnokiirc.gz file in /usr/share/doc/gnokii/sample/gnokiirc.gz file here after that i did gunzip gnokiirc.gz then i transferred my file from the /usr/share/doc/gnokii/sample to home directory by using copy command as copying files to home is not allowed so i used sudo sudo cp gnokii /home after that i changed the port=/dev/ttyUSB2 and model=AT in the gnokiirc file in the home directory and then i wrote gnokii --identify
[Code]....
i followed as in the [URL] and [URL] and except this "Note that you will need read/write permissions on whatever serial port you specify in .gnokiirc."(iam confused what is my serial port is it ttyUSB2)
General :: Laptop As Router Between Wireless Router And Windows 7 Box
Aug 7, 2010I'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies View RelatedNetworking :: Making A Home Router ?
Dec 20, 2010After seeing a few articles on making a home router I thought "I'll have a go at that" as I've spare bits and bobs lying around. Now apart form some iffy wireless cards one major problem sprung to mind. Clearly there will be 2 NIC - 1 in and in my case one out. And that one has to be wireless. But I've yet to find a ready built one (is Smoothwall or the like) that will allow me to do this with a wireless network card in the machine.
Firstly is it doable as all the traffic in my house is wireless. Secondly are there any ready built distros that will handle it for me.
Ubuntu Networking :: Run Hostapd Wireless Utility On Startup?
Mar 1, 2011I run the following command on my terminal to start hostapd which sets up my router to behave like a wireless access point. $ ./hostapd -dd hostapd.conf The service starts successfully. But now i am trying to figure out a way to run this program automatically at start up so that my access point is permanently visible.
View 2 Replies View RelatedUbuntu Networking :: I.P Addressing With Home Router?
Jan 16, 2011I'm wanting to set up a network. I'm still confused as to how to set it up. I think the easiest design is to have a switch on my border router.n this switch will be the servers. Also attached to this switch will be a Linux box. This will be a dedicated firewall. On it will be another switch. And the machines on the internal network will be attached to this switch. In the book "building Internet firewalls"(o'reilly) this set up is described as a screened subnet architecture. However the external interface on the Linux dedicated firewall will have to get it's I.P via dhcp (192.168.1.*) from the border router.
That or it can be a static I.P on the same subnet as the border routers dhcp range 192.168.1.*(but outside the dhcp range) but that would be trickier.The internal interface of this dedicated firewall would be static and on a different subnet as the external interface (192.168.2.*). Then this internal interface could give out I.Ps to the internal network that are on 192.168.2.*. If it did N.A.T for packets from the internal network then N.A.T would be being done twice; once by the Linux dedicated firewall and once on the border router, before going off to the net.Or is it a better approach to NOT do N.A.T on the Linux firewall and have all I.Ps on the whole network assigned as static(outside of the border router's dhcp range, but all on the same subnet(192.168.1.*))?.
Basically is there any point in the Linux box doing dhcp and N.A.T for hosts on the internal network?. I guess the answer is no. But i just wanted to hear your opinions, if you have the time. The border router is a home router. nted to have a normal triple-homed dedicated firewall and put it in the border router's DMZ but it proved unpredictable and tricky. So i just wondered what the best I.P addressing scheme would be for my newer way.