Ubuntu Networking :: Running Xbmc4xbox - Xbox 360 - Neither Of The Two Are Recognizing By The Network
Mar 27, 2011
I am using ubuntu 10.04 LTS. I have an modded xbox (original) running xbmc4xbox as well as a xbox 360 and neither of the two are recognizing by ubuntu on the network. For this post I will refer to the xbox (original) for simplicity I'm hoping.
O.K. I've tried a couple different things, and SUDO APT has become apart of my life, but once again not sure where or what is best & i end up trying them all. For instance Upnp, samba configurations, mediatomb. Also, when I go to Places>Network>Windows Network I receive this message "Unable to mount location Failed to retrieve share list from server" I dont know what to address first. And I'm not sure how to work those programs, for I'm a novice to linux computing and surly that part of the problem. But I have read scores of forums and post as well as ..... videos and my system is not doing what it supposed to do. I figure with the ubuntu desktop at etho0 and the down stairs xbox plugged in the same linksys router and another xbox up stairs connected through wireless adapter and they all connect to the internet fine I am even able to connect between both xbox's and share files. I should be able to see my network on ubuntu. But i don't. I'm completely stumped and have been at this for, well I embarrassed to say as I am a computer repair tech by trade. But I need help I really want to stream movies to my chidrens rooms and my new Apex 40" Class 1080p 60Hz LCD HDTV - Black (LD408
View 1 Replies
ADVERTISEMENT
May 16, 2010
My son has been using 9.10 and when he wanted to play on his XBox live, we just connected a ethernet cable to the Xbox and laptop then clicked on the wireless icon and clicked on wired connection and then he could play on his Xbox. But since upgrading to 10.04 this just will not work. We have tried with the XBox off and on, the wired connection connects but the XBox will not find the connection.
View 2 Replies
View Related
Jan 24, 2011
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
View 2 Replies
View Related
Oct 10, 2010
ive just installed ubunutu 10.10 and its connected to the internet via a wireless conection. However I would like to share the connection with an xbox 360 connected to the computer via a ethernet cable. I changed the method under ip4 in the auto eth0 wire connection to "shared to other computers" aplyed and restarted, however whenever the 360 tries to connect itll take a while and then say unable to connect. I also tried this using a ps3 and the ps3 says timed out waiting for ip address. Ive doen this on windows by bridging the connection and it worked without the use of a crossover wire. Would I need a crossover wire?
View 3 Replies
View Related
May 17, 2010
How do i get my xbox 360 wireless adapter to work on ubuntu?
View 2 Replies
View Related
Feb 6, 2011
I just got a new HP G62 457dx and when I turn it on, it is not recognizing my wireless network, which all my other computers find fine. What do I need to do to get it to see the network?
[Code]....
View 9 Replies
View Related
Jan 16, 2010
I installed ldap on my server and one of my client machines yesterday.It also now won't let me get into graphical utilities that require root privileges; synaptic for example. It comes back with "incorrect password". I noticed that in the terminal it now requires me to enter two passwords to become root: the root password and the ldap password. I wonder if the two are related.I'm not sure what information to post; there's a ton of configuration files associated with this setup. Can somebody help me troubleshoot this? Thanks!
View 8 Replies
View Related
Dec 25, 2010
Hi. I have Ubuntu 10.04, nm-applet is running in the background, my battery icon and sound icon are showing but my network icon has been missing for the past 2 days. It was working fine before but now it's not. How can I fix this issue if I don't have an ethernet cord? Is there a way to roll back the recent updates or do I need to reinstall my network manager?
I've tried restarting the system and I've tried killing nm-applet and reloading it using Alt F2. I get some Debug error.
When I try to run nm-applet --sm-disable
It says an instance is already running and then gives me a warning.
I tried removing "iface eth0 inet dhcp" from /etc/network/interfaces and then tried restarting by "sudo /etc/initi.d/networking restart"
It says:
What can I do to connect to the internet? I have a flash stick if its possible to download a .deb package on this mac and transfer it over to my other laptop to fix the problem. If its possible.
View 7 Replies
View Related
Apr 20, 2011
I were to download a demo from [URL] would it save the demo to my laptop and then I could transfer it to my Xbox via Ethernet cable, even though my laptop has Ubuntu on it or does it have to be Windows computer?
I ask, b/c either way it is just a file on my laptop, regardless of the OS.
So, what does the community think?
View 1 Replies
View Related
May 18, 2010
Ive got my laptop hindered up to my xbox 360 it has windows 7 and Ubuntu 10.04. i realy want to get rid of windows and the only reason i keep it around is because ics sharing works realy well for connecting to xbox live.
I recently discovered that you can (ics) with ubuntu which is awesome only problem is
i cant figure out how to set it up to stop it having moderate NAT so i can play games that require an open NAT. its probably due to the ports not being fowarded properly or somthing and/or the face that my xbox needs a static ip placed out side the routers firewall on the DMZ setting .
View 4 Replies
View Related
Jan 13, 2010
Alright, I'm running Ubuntu KK 9.10 and I've probably read every ICS tutorial on ubuntuforums. I'm running wireless internet via a Linksys router and have a LAN card in my system as well.
(lshw -c network)
Code:
I tried the easy route with 9.10 (setting my wireless to DHCP and LAN to share connection) and although Ubuntu recognizes the Xbox when its turned on (I get a nice notification saying my wired connection is active) the Xbox gets no internet, and doesn't even recognize the connection. (when I tested the connection it failed before it even hit network...)
View 5 Replies
View Related
Sep 17, 2010
I was wondering if it possible to use the Xbox 360 wireless adapter on the XUbuntu system? And if yes, what drivers would I need?
View 3 Replies
View Related
Mar 14, 2011
I want to play my videos on my xbox off of my pc [ubuntu10.10]. I have Ushare configured as follows:
USHARE_NAME=tom-ubuntu
USHARE_IFACE=xbox (I created a new wired connection in the network manager (IPV4 set to shared to other computers and that's what I named it).
USHARE_PORT=49200 (not sure if that's correct or how I'd go about finding the port)
USHARE_TELNET_PORT=
USHARE_DIR=/home/slayton/Videos/
USHARE_OVERRIDE_ICONV_ERR=
ENABLE_WEB=yes
ENABLE_TELNET=no
ENABLE_XBOX=yes
ENABLE_DLNA=no
On my xbox I go to test PC connection. It connects to the network but not the PC and goes to PC Not Listed.
View 1 Replies
View Related
May 22, 2010
I'm trying to share my wireless connection with my Xbox 360 over lan. Anyone know how to do this?
View 1 Replies
View Related
Jul 31, 2010
i have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.
View 3 Replies
View Related
Nov 2, 2010
I know my way around windows but my Vista files got corrupted a few days ago and thats why i decided to use Ubuntu.Well anyway, this is my problem.Ive got a Acer5920 Laptop and an Xbox. My xbox is in the living room and Id like to connect it to the internet. When i had vista i used bridged connection. :Xbox => ethernet port of my laptop bridged with wlan of laptop => router.Bridging connections on vista is fairly easy but I have no clue how to bridge connections on ubuntu.
View 2 Replies
View Related
Jun 17, 2011
I have a similar problem. My ubuntu box is set up as a dhcp router for my Xbox360, my xbox can get ip and DNS information from the computer, but it doesn't seem to get the right info. The ip address it gets assigned is out of the range I've set in etc/dhcp3/dhcpd.conf.
View 1 Replies
View Related
Jan 22, 2011
Hi, So brand new to Ubuntu and linux for that matter. Can't seem to get my network card up and running I have tried the various fixes through the forums, as you can see in the screenshots. Just hoping an expert could help me out so I can finally close the box and get sleep. I have a ASUS M4A78T-E with phenom II. I downloaded ndiswrapper (1.9) and have wicd. The card is trendnet 643PI but it shows up as RealTek 8190.
View 9 Replies
View Related
Jan 22, 2011
share wireless PC connection to xbox 360 via wired eithernet(10.10)?
View 1 Replies
View Related
Jul 5, 2010
I am a semi-noob on this and I have problems getting my emacs recognizing .tex as latex and even running latex-mode. Usually when you run latex-mode (M-x : latex-mode) emacs should switch to latex-mode, but nothing happens in my case. The menu bar still show the TeX options, highlighting remains the same etc.
I am running emacs 23.1.1 (x86_64-unknown-linux-gnu, GTK+ Version 2.10.4), this is on a university system so I don't know much about it.
> uname -a
Linux karakum 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 00:57:09 EST 2010 x86_64 x86_64 x86_64 GNU/Linux.
View 12 Replies
View Related
Apr 22, 2010
I had network manager running on my netbook karma install, but when I installed VNC as another display, logged into that other display and accidentally clicked on not to run network manager on startup cause there is already one running, it screwed up the network manager auto startup on my normal netbook display.I tried adding it back into auto start in settings but that has not worked.As always, thanks for any help you can give me getting this to auto start again on login, without deleting my kde cache(cos it is setup the way I want it).
View 3 Replies
View Related
Mar 22, 2011
I am a bit new to this - Ubuntu is ok with a gui but I am struggling with commands and I think I may have disabled Network Manager. The icon is there in the notification area but when I try to connect it says NetworkManager is not running and when I rightclick the icon the "enable networking" box is greyed out. It is on a desktop which now has no net access so I have not tried to remove and reinstall network-manager.
View 7 Replies
View Related
Aug 6, 2011
So I want to run a Minecraft Server on my computer running Ubuntu 11.04. My goal is to have the server running over my network through one of the virtual terminals without any type of GUI running (to conserve resources). I'm shutting down the ubuntu GUI using the command:
Code: sudo service gdm stop which does a great job, but it also kills my wireless connection.I've tried editing my /etc/network/interfaces, and even uninstalling the gnome network mananger, but nothing seems to work. Can anybody help?
View 1 Replies
View Related
Jan 16, 2010
I'm using Linux mint and get Internet wirelessly from the router downstairs. i have xbox live and get Internet by following the instructions from this page:
http://www.linuxquestions.org/linux/...a_wireless_LAN
but i cant seem to get the script file to run automatically or for the commands to run, so i have to run it everytime i want to connect to xbox live. is there anyway i can solve this?
View 5 Replies
View Related
Feb 7, 2011
I have recently set up a network of 21 computers running Edubuntu 10.10 I use iTalc to communicate with the pcs and also to shutdown all of them at once. The only problem I have, is it doesn't start up again with iTalc. So I switched to ClusterSSH. Only problem I have now is that everytime I run cssh, I need to manually add IP addresses of all the pc's, before I can start issuing commands. Is there a config file or something I can populate with all the IP addresses so that it starts up with all of them already added? And while we are at it, the command to start up a computer on the network?
View 2 Replies
View Related
Jan 5, 2010
I managed to get the older, weaker box on the net and running simply by plugging in the Belkin N-wireless adapter, discovering the Network Manager icon (this really should also be accessible from the system pull-down menu), left clicking to see all the local networks, selecting mine, and inputting the security key, and rebooting. Voila!)However, on the newer, more powerful box, the network Manager gives me nothing but "Wired connection" at every boot (there is no such connection), I created a wireless connection under the settings (accessed through create VPN settings), but the Manager sees no wireless networks. Reboot solves nothing Network Manager is not seeing anything, I suspect that the card although powered by the USB, is not being seen by the system.
View 8 Replies
View Related
May 4, 2010
I am using a Toshiba Laptop model P205D-S7802 with an atheros wireless card. Since I upgraded to 10.04 I am unable to connect to the internet unless I use an ethernet cable. I have been surfing the threads for a fix and have tried what has been posted but to no avail.
HTML Code:
eth0 Link encap:Ethernet HWaddr 00:1b:38:b6:cb:98
inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21b:38ff:feb6:cb98/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
View 8 Replies
View Related
Feb 21, 2011
i have 3 comps(running ubuntu 10.04) and a laptop(running vista sp2). i have installed samba on all ubuntu comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet.the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.all the systems have a static ip.
View 9 Replies
View Related
Jun 13, 2010
my card is not recognized in any way by ifconfig or iwconfig as shown below, but is visible via lsusb. It is 54Mb usb, and has a detachable antenna with the Atheros chipset shown below. I have removed (by #) the ath_pci from the blacklist under /etc/modprobe.d but cannot seem to start this still. I used compat-wireless-2010-06-01 (06-12 appeared to have errors I could not easily overcome). The lspci -nn command only shows my internal broadcom which I am not currently using. My goal is to do wireless research so I need the atheros (among others)...
my hw: Dell series n, TP-Link's TL-WN422G USB wireless stick
$ lsusb | grep Ath
Bus 001 Device 004: ID 0cf3:1006 Atheros Communications, Inc.
$ lsmod | grep ath
ath9k 71145 0
[Code]....
Seems to me that their should only be one ath9k driver, but several are loaded. Are all required for functionality perhaps?
View 2 Replies
View Related
Jun 14, 2011
After trying to deal with a very frustrating problem in Ubuntu 11.04, which caused my Eee Pc 1001PX to freeze any time I connect it to a wireless network. It worked Perfectly using my ZTE WCDMA Mobile broadband modem though. I gave up - and Formatted my netbook, Downgrading it to Ubuntu 10.10. Now the problem is the exact opposite:
The Wireless works perfectly, But the Modem Is causing the trouble.
Here is the problem:
Whenever I reboot the Computer, It doesn't recognize the modem. If I right click the networks button on the top, go to edit connections, and Delete the mobile broadband connection I had previously configured, then unplug the device (usb) and reconnect it, The computer recognizes it, allowing me to reconfigure the connection (make a new mobile broadband connection). As you can guess, repeating this after every reboot is rather irritating.
Some Technical Details:
My pc: Asus Eee Pc 1001PX
My Mobile Modem: Zte WCDMA Netstick.
When I tried to update my Kernel, the Wireless Problem from Ubuntu 11.04 was back, and I had to reformat.
View 1 Replies
View Related
