Ubuntu Networking :: Realtek8192su/10.1064bit/fresh Install On New Build Desktop
Feb 14, 2011
I have no "enable wireless" option from network manager. I successfully installed the 8172 driver, however upon enabling it causes a system freeze, and I'm forced to use the reset button. I have no clue how to proceed from here. Data that might be of use from the "how to post" thread:lsusb Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter
ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:22:86:80:da
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::225:22ff:fe86:80da/64 Scope:Link
[code]....
View 6 Replies
ADVERTISEMENT
Feb 27, 2011
I had 2 Ethernet ports and neither of them were working on a fresh build a friend was struggling with. After reading the suggestions to fix the issue and thinking that there had to be an easier way I had an epiphany. I would go to my spare parts box and bring out my old Netgear GA311 and pop it into the slot. So after searching for 10 minutes I found it and installed it. Booted up the rig and it found that right away (SWEET) now that's not the fix anybody can do that, once I updated Ubuntu the on-board ports started working (that's what I'm using now). I can't explain what the update did but for a few bucks a used card in the tool box might not be a bad idea!
Mother board is a Gigabyte GAX58A-UD5 Rev.1 Personally I'm an ASUS guy.
View 1 Replies
View Related
Jun 25, 2011
As the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
View 2 Replies
View Related
May 23, 2010
I have a problem with gnome panels, when i start ubuntu the gnome panels are missing.
i have tried code...
which does restore the panels but if i reboot the panels go away again,
This is on a new installation of Ubuntu 10.04, i'm preparing it for use by someone else and they can't use it easily without the panels
View 3 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Aug 7, 2009
i can't seem to get a fresh install to boot on a Acer Aspire T160 desktop computer, after the install finishes (basic install, command line only) it gets past 'Verifying DMI Pool.......' but then nothing, it just hangs, no Grub messages, nothing. Here is my hardware/config
Proc: Sempron 3200
Mem: 512 MB
/dev/hda1 110GB / Bootable
/dev/hda2 4GB Swap
/dev/md0 150GB /home
/dev/sda1 RAID
/dev/sdb1 RAID
i have tried RAID1 and RAID0 for md0, no change, i've also disconnected the raid all together and just installed on the IDE drive, still nothing. I noticed the BIOS supports hardware RAID but i have that disabled from past experiences and opting for software raid instead. i've gone through 'linux rescue' and reinstalled Grub, rebuilt raids and checked disks.
an interesting thing happens tho if i just have the IDE drive plugged in and nothing else... i get a BIOS message asking to plug in a bootable disk, does this mean it doesn't see my linux install at all? doesn't know to pass the boot along to /dev/hda?
i'm running out of ideas, tho neither have i tried installing to the raid... nor have i tried any other distros (Fedora, Ubuntu) on this machine yet.
View 3 Replies
View Related
Mar 13, 2011
I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011
[code]....
View 7 Replies
View Related
Sep 4, 2010
After a fresh Ubuntu 10.04 install, no internet for some reasons.
Here is what I have in ECT/network/interfaces
Here is the results of sudo dhclient:
No working leases in persistent database sleeping.
View 9 Replies
View Related
Oct 30, 2010
I just installed ubuntu 10 on my pc and unfortunatly I don't have internet. I only have one pc wired to my 2wire modem. I want to use dhcp, no static ip if possible.
View 5 Replies
View Related
Aug 21, 2010
I accidentally downloaded a torrent of the ALTERNATIVE ubuntu 10 installer. install went fine except for the part where i had to do the networking part, think i did something wrong there (as in skipped it). past ubuntu installs worked perfect using regular installer. googleing led me to use "lshw", and the command lshw says that the network is disabled (shows correct network controller tho).
View 3 Replies
View Related
Jun 28, 2011
Yesterday I switched from CentOS to Ubuntu, and wanted to install TeamSpeak3 which runs on ports 9987 UDP and 10011 TCP. The TeamSpeak3 worked fine on CentOS before this.
It appears to be running and netstat -an reports:
Code:
udp 0 0 0.0.0.0:9987 0.0.0.0:*
tcp 0 0 0.0.0.0:10011 0.0.0.0:* LISTEN
I believe the only firewall for Ubuntu is "UFW", am I correct? If so, "ufw status" reports:
Code:
Status: inactive
I do have other things running on UDP (Counter Strike Source servers) and people can connect just fine.
When I telnet localhost 10011 I get a response from the TeamSpeak3 server:
Code:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
TS3
Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help <command>" for information on a specific command. However, telnetting from outside just gets no answer, this is what leads me to believe it is a firewall in the way.
View 4 Replies
View Related
Jan 17, 2010
I just installed a fresh Ubuntu over a Vista install on a Compaq 6720s with Wubi.But the wireless doesn't work in Ubuntu. In Vista everything is still fine.I tried two tips from the help program in Ubuntu, but to no avail. I also tried reseting and restarting. Tried the manual swith on the laptop.
View 2 Replies
View Related
May 5, 2010
I decided to do a fresh install of 10.04LTS on a Dell Latitude D600 Laptopne wordDisaster I have no wireless or WIRED internet connection. After viewing another post I've provided the output of "sudo lshw -C network" command below (I've blocked out my MAC address on purpose). It appears that the lan card is not even being recognized. The card is enabled in bios (I've checked twice). I don't get it, the wireless worked fine before I did a fresh install of 10.04LTS. I can't use wireless because I have the b43 driver firmware issue that I can't resolve unless I get my wired connection working.
*-network
description: Network controller
product: BCM4309 802.11a/b/g
[code]...
View 9 Replies
View Related
Jul 10, 2010
So i just intstalled ubutnu for the first time and the internet doesnt seem to be working, i am able to go on some majour websites such as google and gmail but others i am unable to visit.
I tried creating a blacklist-ipv6.conf file in the appropirate location
and i have even tried turining off ipv6 i forfox about config by chagning the value o true
but without any luck.
btw i tried pinging google and it works
my computer is connected to a t homehub and these are some screenshots i thought you might find useful.
View 9 Replies
View Related
Sep 16, 2010
I just installed 9.10 to a dell inspiron 531s and neither the ethernet nor the wireless will find a signal. The results of sudo lshw -c network are
*-network
product: BCM4318 [AirForce One 54g] 802.11g wireless LAN controller
vendor: Broadcom Corporation
[code]...
View 1 Replies
View Related
May 13, 2011
i have a dual boot system with xp and ubuntu 10.10 (which i recently installed). The internet works fine on my xp but on ubunutu it did not work.
i tried few things, like changing the proxy setting in mozilla firefox etc, but i did not work
i am attaching snapshot of ifconfig, resolve.conf and route-a commands for your referral
View 9 Replies
View Related
Jun 29, 2011
I have installed ubuntu, xubuntu on this laptop with usb drives and even net install wont work. Once the os gets installed i see no indication that the ethernet is even there...
lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
[Code]...
My wireless works with Broadcom support. The ethernet has never worked, i think when windows was still on it, it did.
View 9 Replies
View Related
Jul 26, 2011
I've had so many issues with 11.04 Natty that could not be solved I just fresh installed Ubuntu 10.04 from a USB as my netbook does not have a CD drive. Well, after installing and restarting I have no wireless. I ran iwconfig and I got pan0 no wireless extensions. How do I fix this?lspci says
ken@ken-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics
[code]...
View 4 Replies
View Related
Aug 1, 2011
After a fresh install of Ubuntu 11.04 (from 10.04) and spending several hours trying to figure out why the ad-hoc connection between my two computers (Fedora14 <-> Ubuntu 11.04) no longer worked - it had worked fine for almost 2 years with 10.04 - I've finally concluded it was a DHCP problem. This realisation (which was slow in coming!) dawned on me when I reversed my setup and configured the Fedora box as the DHCP server and everything was suddenly working perfectly! A quick internet search threw up an installation file called "isc-dhcp-server" which other Ubuntu 11.04 - related forums are also complaining about. My problem is that this file, although available in the repository, is not even installed!!!
It seems unlikely that the developers forgot to include DHCP support, so I hope someone can point me in the right direction.
View 1 Replies
View Related
Feb 16, 2010
I go into the settings and select "manual" and put in my IP, gateway, mask, and DNS. It never lets me use the "apply" button.
View 3 Replies
View Related
Mar 19, 2009
I'm familiar with linux (Debian/Ubuntu), but new to CentOS. I recently installed CentOS 5.2 on a new server for my radio station. I can log in and do everything fine, save connect to any network. I only have a Broadcom wired nic. I know the wire and ethernet jack work fine, so that lead me to the server's settings. I'm not sure if I missed something somewhere, or a similar post (I'm sorry for double-posting if this has been done before).
There is a static IP address set, and that's done correctly.
From what I've seen, someone would like to see /sbin/lspci | grep -i ether: 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
View 7 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
Aug 23, 2010
I'm clueless about this format I need to use for starting this threadI am trying to connect to the internet but have no network connections available and it says my wireless is disabled. (Ubuntu Studio 10.04)How do I turn it on?
1 ) Machine Brand and Model (PC/Laptop):
Code:
HP Pavilion, a6600f
[code]....
View 9 Replies
View Related
Oct 24, 2010
I did a fresh install of Ubuntu 10.10, coming from 10.04 and the wired network connection sometimes works, and sometimes doesn't. Right now I manually removed current network from System-->Preferences--> network connections, define a new one, and reboot. This usually fixes, although I've had to do this two times in the past.
Other general info
Ubuntu 10.10 64bit, EVGA P55 motherboard, on board either net.
View 1 Replies
View Related
Jun 12, 2009
Just tried new Fedora 11 yesterday, did a fresh install with ext3 /boot and ext4 file system, booting looks great, but wireless doesn't work. I have tried using broadcom-wl, dnmouse script, dnmouse broadcom f11 rpm, fwcutter but not ndiswrapper
Code:
# rpm -qa | grep broadcom
broadcom-wl-5.10.79.10-2.fc11.noarch
Code:
# lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Code:
# lspci -vvv | grep 4312
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN Controller
ifconfig only shows eth0, lo and pan0 interfaces, and got nothing from iwconfig...
Code:
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
Even tried to blacklist b43 after installing broadcom-wl driver, but no luck. Broadcom-wl works fine with Fedora 10 on my laptop, is it possibly because of the new ext4 file system? Should I try ndiswrapper or install Fedora 10 again and do a preupgrade? I also use fedora at work.
View 14 Replies
View Related
Mar 19, 2011
I just did a fresh install of 10.04 on my system and everything runs perfect and exremely smooth, however the update manager and firefox are taking forever to load (the progress meter reads something like 2d 17hr 23m), however the internet connection is very fast.the logs are all insanely clean with the fewest errors I've ever seen, so this shouldn't be too terribly difficult to solve. Also I seem to be having a problem with the font on Firefox, every fourth letter or so has a bright streak in it. Anyway, that might be related or not but my main concern right now is getting my download speed up to par?
View 1 Replies
View Related
Jun 27, 2009
I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:
kmod-wl
broadcom-wl
ndiswrapper
I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.
View 3 Replies
View Related
Jun 12, 2011
I'm a newbie and try to switch from Win7 to Ubuntu 11.04 with unity desktop.
My internet connection is slower than hell, and I dont know how to fix it. I tried with disable Ipv6 but it doesnt make any difference. Not sure if its disabled proper because if i do code...
View 1 Replies
View Related
Jan 20, 2010
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
View 11 Replies
View Related
Apr 20, 2010
Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?
View 1 Replies
View Related
