I accidentally downloaded a torrent of the ALTERNATIVE ubuntu 10 installer. install went fine except for the part where i had to do the networking part, think i did something wrong there (as in skipped it). past ubuntu installs worked perfect using regular installer. googleing led me to use "lshw", and the command lshw says that the network is disabled (shows correct network controller tho).
View 3 Replies
After a fresh Ubuntu 10.04 install, no internet for some reasons.
Here is what I have in ECT/network/interfaces
Here is the results of sudo dhclient:
No working leases in persistent database sleeping.
I just installed ubuntu 10 on my pc and unfortunatly I don't have internet. I only have one pc wired to my 2wire modem. I want to use dhcp, no static ip if possible.
View 5 Replies View RelatedYesterday I switched from CentOS to Ubuntu, and wanted to install TeamSpeak3 which runs on ports 9987 UDP and 10011 TCP. The TeamSpeak3 worked fine on CentOS before this.
It appears to be running and netstat -an reports:
Code:
udp 0 0 0.0.0.0:9987 0.0.0.0:*
tcp 0 0 0.0.0.0:10011 0.0.0.0:* LISTEN
I believe the only firewall for Ubuntu is "UFW", am I correct? If so, "ufw status" reports:
Code:
Status: inactive
I do have other things running on UDP (Counter Strike Source servers) and people can connect just fine.
When I telnet localhost 10011 I get a response from the TeamSpeak3 server:
Code:
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
TS3
Welcome to the TeamSpeak 3 ServerQuery interface, type "help" for a list of commands and "help <command>" for information on a specific command. However, telnetting from outside just gets no answer, this is what leads me to believe it is a firewall in the way.
I go into the settings and select "manual" and put in my IP, gateway, mask, and DNS. It never lets me use the "apply" button.
View 3 Replies View RelatedI'm familiar with linux (Debian/Ubuntu), but new to CentOS. I recently installed CentOS 5.2 on a new server for my radio station. I can log in and do everything fine, save connect to any network. I only have a Broadcom wired nic. I know the wire and ethernet jack work fine, so that lead me to the server's settings. I'm not sure if I missed something somewhere, or a similar post (I'm sorry for double-posting if this has been done before).
There is a static IP address set, and that's done correctly.
From what I've seen, someone would like to see /sbin/lspci | grep -i ether: 03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
I just installed a fresh Ubuntu over a Vista install on a Compaq 6720s with Wubi.But the wireless doesn't work in Ubuntu. In Vista everything is still fine.I tried two tips from the help program in Ubuntu, but to no avail. I also tried reseting and restarting. Tried the manual swith on the laptop.
View 2 Replies View RelatedI decided to do a fresh install of 10.04LTS on a Dell Latitude D600 Laptopne wordDisaster I have no wireless or WIRED internet connection. After viewing another post I've provided the output of "sudo lshw -C network" command below (I've blocked out my MAC address on purpose). It appears that the lan card is not even being recognized. The card is enabled in bios (I've checked twice). I don't get it, the wireless worked fine before I did a fresh install of 10.04LTS. I can't use wireless because I have the b43 driver firmware issue that I can't resolve unless I get my wired connection working.
*-network
description: Network controller
product: BCM4309 802.11a/b/g
[code]...
So i just intstalled ubutnu for the first time and the internet doesnt seem to be working, i am able to go on some majour websites such as google and gmail but others i am unable to visit.
I tried creating a blacklist-ipv6.conf file in the appropirate location
and i have even tried turining off ipv6 i forfox about config by chagning the value o true
but without any luck.
btw i tried pinging google and it works
my computer is connected to a t homehub and these are some screenshots i thought you might find useful.
I just installed 9.10 to a dell inspiron 531s and neither the ethernet nor the wireless will find a signal. The results of sudo lshw -c network are
*-network
product: BCM4318 [AirForce One 54g] 802.11g wireless LAN controller
vendor: Broadcom Corporation
[code]...
i have a dual boot system with xp and ubuntu 10.10 (which i recently installed). The internet works fine on my xp but on ubunutu it did not work.
i tried few things, like changing the proxy setting in mozilla firefox etc, but i did not work
i am attaching snapshot of ifconfig, resolve.conf and route-a commands for your referral
I have installed ubuntu, xubuntu on this laptop with usb drives and even net install wont work. Once the os gets installed i see no indication that the ethernet is even there...
lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller
[Code]...
My wireless works with Broadcom support. The ethernet has never worked, i think when windows was still on it, it did.
I've had so many issues with 11.04 Natty that could not be solved I just fresh installed Ubuntu 10.04 from a USB as my netbook does not have a CD drive. Well, after installing and restarting I have no wireless. I ran iwconfig and I got pan0 no wireless extensions. How do I fix this?lspci says
ken@ken-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics
[code]...
After a fresh install of Ubuntu 11.04 (from 10.04) and spending several hours trying to figure out why the ad-hoc connection between my two computers (Fedora14 <-> Ubuntu 11.04) no longer worked - it had worked fine for almost 2 years with 10.04 - I've finally concluded it was a DHCP problem. This realisation (which was slow in coming!) dawned on me when I reversed my setup and configured the Fedora box as the DHCP server and everything was suddenly working perfectly! A quick internet search threw up an installation file called "isc-dhcp-server" which other Ubuntu 11.04 - related forums are also complaining about. My problem is that this file, although available in the repository, is not even installed!!!
It seems unlikely that the developers forgot to include DHCP support, so I hope someone can point me in the right direction.
Just tried new Fedora 11 yesterday, did a fresh install with ext3 /boot and ext4 file system, booting looks great, but wireless doesn't work. I have tried using broadcom-wl, dnmouse script, dnmouse broadcom f11 rpm, fwcutter but not ndiswrapper
Code:
# rpm -qa | grep broadcom
broadcom-wl-5.10.79.10-2.fc11.noarch
Code:
# lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
Code:
# lspci -vvv | grep 4312
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
Subsystem: Hewlett-Packard Company BCM4312 802.11b/g Wireless LAN Controller
ifconfig only shows eth0, lo and pan0 interfaces, and got nothing from iwconfig...
Code:
# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
pan0 no wireless extensions.
Even tried to blacklist b43 after installing broadcom-wl driver, but no luck. Broadcom-wl works fine with Fedora 10 on my laptop, is it possibly because of the new ext4 file system? Should I try ndiswrapper or install Fedora 10 again and do a preupgrade? I also use fedora at work.
I'm clueless about this format I need to use for starting this threadI am trying to connect to the internet but have no network connections available and it says my wireless is disabled. (Ubuntu Studio 10.04)How do I turn it on?
1 ) Machine Brand and Model (PC/Laptop):
Code:
HP Pavilion, a6600f
[code]....
I did a fresh install of Ubuntu 10.10, coming from 10.04 and the wired network connection sometimes works, and sometimes doesn't. Right now I manually removed current network from System-->Preferences--> network connections, define a new one, and reboot. This usually fixes, although I've had to do this two times in the past.
Other general info
Ubuntu 10.10 64bit, EVGA P55 motherboard, on board either net.
I have no "enable wireless" option from network manager. I successfully installed the 8172 driver, however upon enabling it causes a system freeze, and I'm forced to use the reset button. I have no clue how to proceed from here. Data that might be of use from the "how to post" thread:lsusb Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter
ifconfig
eth0 Link encap:Ethernet HWaddr 00:25:22:86:80:da
inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::225:22ff:fe86:80da/64 Scope:Link
[code]....
I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:
kmod-wl
broadcom-wl
ndiswrapper
I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.
I just did a fresh install of 10.04 on my system and everything runs perfect and exremely smooth, however the update manager and firefox are taking forever to load (the progress meter reads something like 2d 17hr 23m), however the internet connection is very fast.the logs are all insanely clean with the fewest errors I've ever seen, so this shouldn't be too terribly difficult to solve. Also I seem to be having a problem with the font on Firefox, every fourth letter or so has a bright streak in it. Anyway, that might be related or not but my main concern right now is getting my download speed up to par?
View 1 Replies View RelatedI'm a newbie and try to switch from Win7 to Ubuntu 11.04 with unity desktop.
My internet connection is slower than hell, and I dont know how to fix it. I tried with disable Ipv6 but it doesnt make any difference. Not sure if its disabled proper because if i do code...
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
Using karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try wireless drivers unfortunately i can't get them to work. How can i revert back to original ubuntu drivers?
View 1 Replies View RelatedThe "ADD" button is greyed out in NetworkManager (KDE). I need to try and setup a tunnel to a Cisco Router.
I've verified the following packagers were installed, as per other posts:
I had 2 Ethernet ports and neither of them were working on a fresh build a friend was struggling with. After reading the suggestions to fix the issue and thinking that there had to be an easier way I had an epiphany. I would go to my spare parts box and bring out my old Netgear GA311 and pop it into the slot. So after searching for 10 minutes I found it and installed it. Booted up the rig and it found that right away (SWEET) now that's not the fix anybody can do that, once I updated Ubuntu the on-board ports started working (that's what I'm using now). I can't explain what the update did but for a few bucks a used card in the tool box might not be a bad idea!
Mother board is a Gigabyte GAX58A-UD5 Rev.1 Personally I'm an ASUS guy.
After trialling ubuntu on my home comp, and getting brilliant results, i've now migrated my work computer too. Now, i can't connect to the internet or office network. I'm on a small office wired network. When i was on XP all the settings were on 'utomatic' - didn't need to input an IP, DNS, subnet etc. Now i Can't even ping the router.I've browsed around various other threads and can't find a working solution. I've tried inputting various settings in ubuntu connection settings, but still cannot get it working. (was hoping it would be automatic, as it was on my home comp).
View 1 Replies View RelatedI installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
I had the elrepo kmod-r8168 driver running smooth for a while on my development box.
Yesterday, I did a clean install on it and when I tried to install the latest kmod-r8168 rpm, it failed to enable the networking support:
# yum --enablerepo=elrepo install kmod-r8168
The install performed all proper steps to disable the 8169 driver, I double checked to be sure.This is not a connectivity issue. If I remove the kmod-r8168 rpm, reboot the server and run the ifconfig eth0 up to activate the interface, everything works as expected. I use the latest kernel (2.6.18-194.26.1.el5 x86_64).
First, I performed a clean install, activated the eth0 and did a yum update, then installed the kmod-r8168 with yum. Then, I reinstalled the OS again, activated the eth0 and installed the kmod-r8168 on a 5.5 CD based kernel, same fail results. The only hiccup is: every time I start the box, I have to activate the eth0 interface (with default CentOS 8169 driver):
# ifconfig eth0 192.168.1.3
# ping -c 3 192.168.1.1 (no packets lost)
# ifconfig eth0 up
Once I do this, I have network connectivity.
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI ordered a SuSE 11.4 installation DVD from an online Linux Distro distributer that I've used before with no problems. I did this rather than burn my own DVD from the website. I thought that I might perform a fresh install of SuSE 11.4 on this Dell 1420 Laptop that is currently running Ubuntu 11.04.
Note, this is a completely fresh install, not a side-by-side installation with Ubuntu; I followed the installation sequence that completely repartitions the entire disk for SuSE, and accepted all of the suggested options regarding logon, etc.
Everything goes well ... sort of. The first install didn't reboot correctly, i.e., the set-up that is supposed to run after the initial install never happened and I had to manually power-down the machine and restart from the "safe mode." Needless to say, that didn't work as expected. So, I re-install, from scratch, trying different options: for instance, instead of LVM, I decide to have an un-encrypted partition scheme and accept the "obvious" options ... thinking that the LVM options interacted badly with the install. Eventually I get the installation to proceed correctly, or so it appears: it goes though the entire sequence, including the re-boot, building the default image, etc.
I test this image by removing the DVD, power-cycling the machine, and all looks good, so I begin the process of installing software updates, etc. Being paranoid, I re-boot the machine, and all restarts correctly, etc.
Now here's the annoying thing. The next day, I power the machine on, and it locks at the splash screen. By the way, these are the exact symptoms that I experienced with the bogus/incomplete installations. The boot sequence proceeds up to the splash screen and waits forever.
So, in sum: I spent inordinate amounts of time attempting to install this software, carefully following the instructions provided by the installer. In every instance, after leaving the machine off for a day or so and rebooting, I am met with a splash screen that sits forever. Needless to say, I am extremely reluctant to repeat another day of software installation to only have to re-start with no assurances of success. Either I go back to ugly Ubuntu (which has always worked out of the box, by the way), or I look at other options. I was hoping to use SuSE, but I really don't care which distro is on that machine as long as it works and it provides TeX, R, Emacs, Scheme, and a few other software packages that I'm sure are of no interest to your customer base.
