Ubuntu Networking :: Install SPOONWEP And Gerix-wifi-cracker-ng In Lucid?
Aug 12, 2010How to install SPOONWEP and Gerix-wifi-cracker-ng in Lucid? I want to test my OWN network.
View 1 RepliesHow to install SPOONWEP and Gerix-wifi-cracker-ng in Lucid? I want to test my OWN network.
View 1 Repliesan Ubuntu newbie here looking for advice. Apologies if this is a frequent question. I misplaced my Belkin USB wifi antenna recently -- I'd never gotten it working with Ubuntu as I lacked the original driver CD and hadn't bothered doing the footwork with ndiswrapper (without driver files, as Belkin just gives you an .exe) to get it functional. I'm currently living in a home where I can't be wired directly to the router, so I'm looking for advice on what kind of antenna I should get to replace it. Are there any manufacturers out there that provide Linux drivers out of the box, who make quality hardware?
View 2 Replies View RelatedUpgraded to Lucid Beta2 on my 1000HE eee pc. Now unable to connect to wifi. Wifi searches, then decides it needs password. I enter the proper password and it searches again, but never connects. Here's the strange thing: Using latest 2.6.32.21-generic kernel, wifi will not connect. But, when I boot with 2.6.31.20-generic, wifi works fine.
View 1 Replies View RelatedInstalled Lucid yesterday. Rebooted and lucid seen my wifi connection but after a few mins drops the connection and will not re-connect. Now, I cannot get it to connect at al even though the WPA password is correct, and rebooting to Win7 shows no problems there.Looks like it's back to go old wicd,
View 9 Replies View RelatedA lot of people have the problem to find themselves with Lucid Lynx 10.04 and experience massive issues when connecting to wireless - me too. As a service, here some relevant links which promise relief:
[code]...
I tried all of them, and none reliably worked. Every solution which required re-association wtih the AP helped for some time, but nothing helped for long. First, don't let yourself fool by the disable IPv6 trap - while it is "enabled" it is acutally not used by Lucid! I have a clean install of Kubuntu 10.04 on an AMD64 Laptop with Broadcom STA driver: 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03) However I can reliably stabilize my connection for some time either by manually disabling WiFi with the hardware switch or disabling WiFi by software means and re-activating. This brings speed at par with Kubuntu 9.10 until some time. Can anybody confirm this behaviour?
Yesterday, I did a clean install of Lucid on a T42 thinkpad, with wireless card as identified by lshw below. I did the installation from within a live CD session, with wifi enabled.
Code:
description: Wireless interface
product: PRO/Wireless LAN 2100 3B Mini PCI Adapter
vendor: Intel Corporation
On reboot into the fresh system and update I had the issues that others have seen with network manager not connecting, repeatedly asking for password and so on. Oddly enough, using a Netgear usb wifi dongle worked perfectly, so I thought there might be a driver issue. Updates did not help. The network manager icon would not appear in the notification area at all when attempting to connect to wifi in a cafe locally. Today, I did a fresh re-install from the same CD with the home wifi switched off and no internet connection on the laptop. No issues. Wifi is working perfectly at present. I had to make the home connection available to all users to stop the keyring password request (I use autologin). I'll be trying to connect at local cafes tomorrow (one has no security, one uses an ascii wep password, and a third has a WPA encryption)
Is it possible that the settings from the live session are carried over in some way and interfering with network manager in some way? (This all started because my minimal install (see signature) reached a state where it would not show the network manager icon when attempting to connect to wifis in cafes and colleges, which I need to do. I decided to reinstall to return to a known state. I may try a minimal installation and manual wifi connection from the command line next...)
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View RelatedI posted this on Launchpad under bug# 569445 and though I'm certain someone in our heroic development community will have a look at it eventually, maybe someone can help me here in the meantime, or at least provide some background info. Maybe a little reassurance that Ubuntu isn't broken for my Wifi is all I need.
Quote:
Binary package hint: wireless-crda I do hope I've picked the right package for this. Investigators, feel free to email me with whatever bash commands you need me to find out more about the hardware. The problem is that wireless in Lucid is dying for me after about a minute or so, and the activity light on my netbook just flashes. The wireless monitor at the top of the screen still thinks it's connected. It's like it's out of sync or something.
This doesn't happen under Win7 on this hardware, nor does it happen to other devices in my house on the network. Also, I wasn't having this problem under Lucid Beta 1 I have an Acer Aspire (Olympic Variant) 1410 Win7 reports the adapter as Intel WiFi Link 1000 BGN The wireless router I'm using is a DLink DIR-628. The connection is OPEN.
I have an old laptop that has bcm4306 (rev 3). I have used it to install several iterations of Ubuntu in past year or so, and the wifi worked just fine for Intrepid and Kermic, using b43-fwcutter.However, when I installed Lucid from scratch, I can't get the wife to work.It says it was installed properly, but I can't see any network around.
View 2 Replies View RelatedI started yesterday off wanting to install this USB wifi adapter on my PC (which is mini-itx so has additional pci slots) [URL] it has the Ralink 3070 chipset. I tried everything I found when googling, nothing came close to working, this was in Fedora12. So I gave up and installed Ununtu 10.04, hoping for better luck there. Ubuntu will recognise the presence of a wifi adapter, here's the output from iwconfig
[Code]....
But it sees no wifi networks and generally won't do anything; I don't think it has the right driver. Rosewill does list a (linux) driver and so does Ralink, but again, neither of these come close to working. has anyone gotten this adapter or chipset to work in ubuntu?
just joined the forum so I am a little lost. I am trying to get my wifi to work on an HP Pavilion tx 1115nr (tx1000 series). I am using Ubuntu 10.04 desktop, my network card is BCM4311 rev1.I have read many threads and tried about everything, but I am so close. I can load bcmwl-kernel-source from the software center, restart and my wifi works for that startup. If I restart my computer again, it no longer works. I can then remove bcmwl-kernel-source and reinstall it and it works just once again.I have blacklisted b43 and ssblsmod reveals that these modules are missing after restart when wifi doesn't work:
arc4
lib80211
lib80211_crypt_tkip
[code]....
Does anyone know of a decent Ubuntu networking tutorial I can work through? I'm struggling to get a new install of Lucid to see anything on my home network.
The current state of play is:
I can browse the internet and the router.
I have several laptops running Ubuntu and a NAS drive but the HP desktop PC with the new Lucid installation can't see them.
The NAS and the HP are wired to the router.
I installed Lucid because I never got Maverick to see the network either.
Lucid on my laptop can see the NAS drive over wireless.
I can see the NAS drive but not the other machines if I boot the HP into WinXP.
I'm not much good at XP networking either so perhaps that needs configuring too. A decent tutorial would be useful, especially one that doesn't assume I have Windows machines on the network as we rarely use Windows now.
I'm having a problem with my wifi card: it is not detected by the network manager. I have tried going to the Hardware Drivers utility, but it doesn't find any proprietary hardware.I really am at a loss as to how to make Lucid "start over" with the wifi detection.I have installed Lucid using an existing /home, which was under 8.10. Maybe i just need to wipe out some configuration files to start afresh?
View 9 Replies View RelatedI have a laptop that was working fine with 10.04 LTS. Today, I did a full 10.10 install and now my wireless is not working. Thinking it had to do with 10.10, I did a full install back to 10.04 LTs. Wireless is still not working. I tried installing the driver for my laptop's internal wifi using ndiswrapper, but that didn't work either. I have another laptop that is identical to the non-working one, with the exception that it is running a Celeron processor and non-Nvidia graphics. Otherwise, they are identical with respect to the wifi adapter. The Celeron machine is giving me absolutely no problems.
View 9 Replies View RelatedI've got a level one usb wifi model wua-0603. However, ubuntu 9.10 could not recongize it automatically. How can I install the driver for it ?
View 1 Replies View RelatedI've been using Ubuntu for a few years now and in general am very pleased with it; it's Achilles Heel is however WiFi.My daughter has an older HP laptop with built in Broadcom wifi, Lucid did not recognise this, neither did it recognise a Netgear PCI card or a Netgear USB adapter.Network manager showes wifi greyed out.lspci -vnn shows BCM4303 802.11b [14E4:4301] (rev 02)lshw shows *-network:1 UNCLAIMED and shows product as BCM4303 802.11b wireless LAN controller.Wifi is the most popular connection method for the average user, until it is made simpler to resolve problems a lot of potential Linux users
View 3 Replies View RelatedI installed the bleeding edge drivers using a guide I was referred to from the wiki, when I was having intermittent wifi connections. It worked well for about two days, but now it's just as intermittent as before, and it works just fine in OSX and on other machines, so I'm thinking I need to change the driver.
How do I go about installing another driver? Which ones have you had luck with for a MacBook Pro Santa Rosa 3,1 running lucid under 64 bits?
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
how to install D-link dwm-152 (3G/HSDPA) usb adapter on Lucid Lynx?
i've run lsusb and the result are:
Bus 005 Device 002: ID 0a5c:2162 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]......
im new to Centos and need my wifi card working .i tried the help but apparently yum cannot find any packages and neither are the packages available on the site listed
View 2 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
Have been using Ubuntu Desktop Amd64 for 6months, on a dual boot alongside Vista64. Since first installing the OS, I have switched over to Ubuntu & use Windows only for heavy multimedia edition & the occasional gaming.I just bought a netbook and installed Ubuntu 10.04 LTS NBR. Works great, except for wlan. No propriety drivers available for my Intel Wifi Link 1000BGN.
I've spent hours trying to install iwlwifi, but the process is somewhat complicted for a noob such as myself.After much reading and trying, I've managed to download and install iwlwifi-1000-ucode-128.50.3.1.tgz, (following the http://intellinuxwireless.org/?p=iwl...=howto-iwlwifi instructions)and am now working on installing the mac80211 subsystem (following the http://intellinuxwireless.org/?p=mac...howto-mac80211 instructions)When running
Code:
% wget
intellinuxwireless.org/mac80211/downloads/mac80211-10.0.4.tgz[/url]
[code]....
I love it on my Dell D610 with wifi. I've installed Ubuntu 11.04 and land on the wifi problem as explain here: [URL]
but the wifi BCM4311 seem not working for me. In the hardware/additional drivers, i've the message that the proprearty driver is working and in use. But i cannot scan the network and no way to connect to my d-link via WPA-PSK (TKIP+AES)...
Hello, I just installed fedora on my Dell Insprion 1545 labtop but don't know what firmware to install to get WIFI active.
View 1 Replies View RelatedI have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have a Canon PIXMA MG5250 stand alone wifi printer thats connected to all my windows computers and laptops. Now I want to install a computer with Ubuntu 10.10 and connect this printer also wireless by wifi.
View 9 Replies View RelatedI have a USB WiFi adapter that my Ubuntu desktop install (10.10) automatically detects, and it works great. I just used the alternate installer to set up an old box as a server, and it doesn't install the driver for the adapter. lsusb finds the adapter, but I don't get a wlan* listed in /dev/. how I can determine what module(s) are used to run this adapter on the desktop so I can load them on the older box? Or is there some package I should install from the CD to help auto-detect the adapter?
View 8 Replies View Related