how to install D-link dwm-152 (3G/HSDPA) usb adapter on Lucid Lynx?
i've run lsusb and the result are:
Bus 005 Device 002: ID 0a5c:2162 Broadcom Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]......
1. D-Link DWA-643 Xtreme N Express Card Adapter The onboard wireless for my HP tx1000z stopped working a long time ago. This wireless adapter is in my express card slot.
2.
Code:
$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
[Code]....
My D-link DWM-152 HSDPA USB modem is not in the USB_modeswitch supported hardware list and ubuntu was recognized it as USB storage. Any idea how can i switch it to modem mode? I'm using ubuntu lucid.
View 3 Replies View RelatedI want to install the DLink N150 (DWA-125) Wireless USB adapter in Ubuntu 9.04 if if go to
system-> administrator->log file viewer->dmesg
[ 8.840794] type=1505 audit(1286918554.305:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2041
[code].....
i don't know how to enable wireless.
I have just installed Ubuntu 9.10 on an Acer TravelMate 290E. I've got internet connection through the Ehternet Cable, but when I plug in the D-Link WLAN USB device, although the system recognises it, it is disconnected. How can I connect the WLAN USB device adn get it to work?
View 5 Replies View RelatedIt worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
View 1 Replies View RelatedI have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
I've a damn TP-LINK WG422G UBS Adapter that i love i installed latest compat-wireless driver package and used latest ar9271 firmware after that it was worked properly. There is no problem when surfing the net, the problem is occurring usually download something via torrent sometimes form websites. I'm starting to download and then usb adapter suddenly freeze. If i remove and plug in the usb adapter it is working again.
View 1 Replies View RelatedHave tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.
View 3 Replies View RelatedI'm having some issues getting connected with a TP-Link TL-Wn727N wireless USB adapter. I have no way to connect hard wired with the computer, but I have another working notebook to possibly download files. However, the second notebook is a Mac, so most of the posts I've found are not filling in all of the answers. Also forgot to note, I am using Ubuntu 10.10. I followed along with this and managed to get the card to find the wireless connection. However, the connection would never connect. After entering the security password the wireless icon would do it's thing and then pop up asking to ok the password again. I double, triple checked the password and it is correct. I found elsewhere that I should probably install wicd. This is where I've run into problems with finding the way to get files that I can download on the Mac and then installed on the Ubuntu computer. I managed to find this forum thread and downloaded this file I transferred the file from the Mac to the Ubuntu with a flash drive and tried to install. First the install said that Network Manager needed to be removed, so I removed it. Next it says "Dependency is not satisfiable: python-urwid." I'm not sure how to go about getting this dependency as it is not showing up in the package manager.
View 6 Replies View RelatedWiFi adapter TP LINK WN821N is not working in 10.10, WN821N is notworking.
[Code]....
i just installed Ubuntu 11.04 64bit on my desktop. i have a TP Link TL-WN321G (Ver 4.0) wireless usb adapter to connect to my wireless network (i used to use it with Windows XP).As expected (i'd read up a bit before installing Ubuntu), the adapter was autodetected - i could see my wireless network listed in the networks list dropdown, and lsusb showed it too.lsusb identifies "Bus 002 Device 002: ID 148f:2070 Ralink Technology, Corp. RT2070 Wireless Adapter"But i cannot connect to the network. When i select my network, it keeps trying to connect, but never succeeds in connecting.
i tried going through the forums for possible solutions, but most of them deal with how to get it working when the adapter is not detected, or when networks are not shown. Or they are for older Ubuntu versions.i use the same wireless network on my laptop (Ubuntu 9.04), and it has a WPA & WPA2 Personal security, with a password, which i've configured in the desktop as well.
download and instal tp link wn321g wireless adapter for ubuntu
View 1 Replies View RelatedI have tried to install tp link tf3200 network adapter without success . the os is 8.04 hardy loading drivers is new to me. the driver is sundance (i think) and the output from the make command is shown below.
pag@paghomelinux:~$ cd /media/cdrom0/TF-3200/LinuxDriver
pag@paghomelinux:/media/cdrom0/TF-3200/LinuxDriver$ sudo make all
sudo: unable to resolve host paghomelinux
[code]....
may i ask if TP-LINK 150Mbps Mini Wireless N USB Adapter support by Ubuntu? (TL-WN723N) I plan to replaced IBM x60s default wireless adapter, coz it's suffered overheat issued.
View 1 Replies View RelatedI got two issues with my wifi usb adapter:
1) it cannot see any networks around
2) i cannot setup it in master mode to use my PC as a router
As far as i can see, the device is recognized and the correct driver (rt73usb) is loaded. I was able to connect to a laptop somehow (the laptop could see other networks and the adapter's PC-to-PC network). I'd like to make it work as a router, i.e. share my internet connection (eth0) via wlan0. Here is what i have:
Code:
Ubuntu 10.04
Linux 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64 GNU/Linux
TP-Link TL-WN321G wifi usb adapter as seen as
Bus 001 Device 006: ID 148f:2573 Ralink Technology, Corp. RT2501USB Wireless Adapter
$ iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:off/any
[Code]....
my long awaited WUA-1340 D-Link wifi adapter has arrived, and...unfortunately won't work it didn't work "out of the box", so I tried the following (found on the aircrack website)Here's what I did....1. Edit /etc/modprobe.d/blacklist and add blacklist rt73usb as a new line.2. RebootThen,
Code:
wget http://homepages.tu-darmstadt.de/~p_larbig/wlan/rt73-k2wrlz-3.0.3.tar.bz2
tar -xjf rt73-k2wrlz-3.0.3.tar.bz2
[code]....
my card is not recognized in any way by ifconfig or iwconfig as shown below, but is visible via lsusb. It is 54Mb usb, and has a detachable antenna with the Atheros chipset shown below. I have removed (by #) the ath_pci from the blacklist under /etc/modprobe.d but cannot seem to start this still. I used compat-wireless-2010-06-01 (06-12 appeared to have errors I could not easily overcome). The lspci -nn command only shows my internal broadcom which I am not currently using. My goal is to do wireless research so I need the atheros (among others)...
my hw: Dell series n, TP-Link's TL-WN422G USB wireless stick
$ lsusb | grep Ath
Bus 001 Device 004: ID 0cf3:1006 Atheros Communications, Inc.
$ lsmod | grep ath
ath9k 71145 0
[Code]....
Seems to me that their should only be one ath9k driver, but several are loaded. Are all required for functionality perhaps?
Could anybody confirm that the D-LINK DWA-556 wireless N PCI-E network card works with Lucid Lynx 64 bit? Im looking for a reliable wireless network card that if possible works out of the box on Lucid 64 bit, so far my search has lead me to the above card, If anyone has hands on experience of this card on lucid 64
View 2 Replies View RelatedI have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
There is a symlink from /var/www to a personal directory. FollowSymlink and chmod 755 are all set. It works perfectly until each morning I will get a "Symbolic link not allowed or link target not accessible" error. When I do a "sudo service apache2 restart", the problem will go away.
View 1 Replies View RelatedI have CentOS5.4 which runs fine with wired internet but when tried to configure a wireless adpter I am not successful. My Network manager is running fine but I can not see nm-applet.
When I run "for BUSID in $(/sbin/lspci | awk '{ IGNORECASE=1 } /net/ { print $1 }'); do /sbin/lspci -s $BUSID -m; /sbin/lspci -s $BUSID -n; done" I get the following:
01:00.0 "Ethernet controller" "Realtek Semiconductor Co., Ltd." "RTL8111/8168B PCI Express Gigabit Ethernet controller" -r02 "Micro-Star International Co., Ltd." "Unknown device 4180" 01:00.0 0200: 10ec:8168 (rev 02)
i have both a vodafone and 3 mobile broadband dongles. they both work out of the box, however i am only getting gprs, while i can get 3g/hsdpa using my windows box. is there any gui configuration manager or terminal commands i can use to set it to 3g/hsdpa only? im running ubuntu 9.10.
View 4 Replies View Relatedi bought 3g internet connection. which is a usb ZTE MF 100 device. as a i am very beginner to Linux , i want to install it on Debian Lenny.
View 11 Replies View RelatedI am running ubuntu 8.04 on a Fujitsu S6420 with internal HSDPA. Any idea how to activate HSDPA ?
View 4 Replies View RelatedI am trying a 3G HSDPA USB Modem inUbuntu 10.04. It detects it as a CD Drive.
When I tried to 'Safely Remove Drive'
I got the following error:
Quote:
Unable to stop drive
Error detaching: helper exited with exit code 1: Detaching device /dev/sr1
USB device: /sys/devices/pci0000:00/0000:00:1d.2/usb4/4-2)
SYNCHRONIZE CACHE: FAILED: No such file or directory
[Code]....
I'm looking with some multiple WAN links on an Ubuntu router box I am building for a project.The setup I'm trying to achieve is this:
eth0 WAN Link 1 through ADSL modem
USB Modem 1 WAN Link 2 for Failover
USB Modem 2 WAN Link 3 for Failover
[code]...
I am running Ubuntu 11.04. When I try to connect t-mobile(USA) modem dongle to my computer, I get this error in dmesg.
My comuter is Lenovo Y460p Core i7 2630M, 8 GB Ram, AMD Graphics.
I have a problem where I'm using Ubuntu linux to mount a Windows Vista machine's USB drive and access it on the web using Apache. I did have the USB drive plugged into the Linux machine directly and that was working via the web. FollowSymLinks is on in httpd.conf
[Code]....
The mount works and I can see the files (see above) from my regular linux user account. If I make a test file in /mnt and soft link to that, I can see it on the web. So it's just the mount to the vista machine that seems to be a problem. It's supposed to be a simple read-only mount and the apache login should (I think) be able to see the same generic root access permissions.
log from apache: [Mon Apr 26 20:39:42 2010] [error] [client 99.99.99.99] Symbolic link not allowed or link target not accessible: /home/user1/pub_html/Music, referer: https://xx.xx.xx/~user1/music.html
The credentials have a login and password that matches a special read-only account on Vista. I can see the files on the system from Linux, but not via the web. As mentioned above, a different link to the same /mnt area works fine via the web. I've tried several different mount options with no success.
Install ZTE HSDPA USB MODEM (Model : MF626) at ubuntu 8.10
View 1 Replies View Related