Ubuntu Networking :: Unable To Use The Wired Connection
Apr 19, 2011
i got wired connection using Ubuntu 10.10 and im new using ubuntu pls tell me where i must write the words not to write codes and i don't where i must do it.what is the best version of Ubuntu didn't had that problems?as i saw that Ubuntu 10.10 had same problem for all people.
View 3 Replies
ADVERTISEMENT
Oct 11, 2010
I am unable to get my wired network connection to work. My laptop sees the wired connection, but will not connect. I am running 10.04 on aLenovo T400 with 3 gb of ram.
View 7 Replies
View Related
Jan 11, 2010
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
View 9 Replies
View Related
Dec 5, 2010
I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies
View Related
Aug 22, 2010
I have an issue relating my broadband connection, which I am not able to solve. I hope and wish, that I would find some way out here.
Some introduction: I am using Dell Inspiron (i3 processor) laptop, which I recently bought. I have win 7 preinstalled in it. In win 7, the wired broadban connection (Airtel connection) is working fine and have no issues.
I have been using mobile GPRS(BSNL, Ltd) through bluetooth, and that have been working fine. But today when I tried to connect through landline connection, it didn't workout. But the bluetooth connection is still fine. When I tried to do the connection manually through Network Manager, it is not taking the MAC Address. Till now, after installation, I have not updated my OS.
I surfed the net and tried some commands, whose results I am posting below.
From a post I found out, that I should change my duplex settings (from 100 full to 10 full), but I could not get much. The corresponding commands and output,
I have posted below:
View 2 Replies
View Related
Aug 26, 2010
I am unable to connect to the Internet using a wired connection. I was able to use the wired network yesterday. But I had problems with the flash player, so had to reinstall Ubuntu again. I am able to connect to Internet using wireless connection. But I need to connect to the wired connection. I am using Ubuntu 10. In my IPv4 settings, it is automatically set to DHCP, using which, I was earlier able to connect. But now it doesn't seem to be happening.
But there are other entries on the syslog that were recent.
Output of dhclient
View 2 Replies
View Related
Jul 14, 2011
I've just installed 11.04 Natty on an old Laptop (Dell Lattitude C400) and am unable to connect to my home network (wired LAN connection, no wireless). The laptop previously had WinXP installed and was able to connect (I have also double checked the cables and ports and they're all functioning ok).
sudo lshw -C network
Code:
*-network
description: Ethernet interface
product: 3c905C-TX/TX-M [Tornado]
vendor: 3Com Corporation
[code]...
View 9 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Jan 22, 2010
I have two PCs one has Windows XP the other has Ubuntu 9.10 on it, the Windows PC has no problems getting on the Internet (I'm posting this with it) and getting an IP address from the wired router. The wired router I have is ONLY wired it does not have wireless at all, it is currently setup to hand out IP addresses between 192.168.1.2 and 192.168.1.254.
The Ubunutu 9.10 PC worked great last night surfed all over the place for hours, then finally shut it down last night when I went to bed, shut down appeared to be normal like it always does when it shuts down, then this morning when I booted it up it gave error: "WIRED NETWORK - disconnected you are now offline".
View 5 Replies
View Related
Mar 15, 2010
I am using ubuntu in my new office, and I can't get the network working. The "official" OS installed was a Windows, and it has a special "dial-up" app for the LAN connection (not wireless). My network admin is apparently not helpful, since he actually knows nothing about the internals for the "dial-up" app (he did not even ever heard of TTLS, PEAP, MD5, etc), and claimed that no OS except for Windows can work...
Well, I have tested various configurations with my Mac laptop, and apparently the LAN connection requires 802.1X authentication, and it's using a very weird combination "TTLS+PEAP+MD5" (if I check these options in Mac OS X, the connection works). However, in NetworkManager, I can't select both TTLS and PEAP, and moreover, TTLS does not work with MD5. So, is there anything I could try?
View 1 Replies
View Related
May 17, 2010
Fresh install of UbuntuStudio 10.04. This is really bizarre.
I can't seem to connect to the wired connection mainly because there is no connections tab (pic attached).
Here's some printouts:
dmesg:
Code:
lshw -C network:
Code:
View 3 Replies
View Related
Jun 1, 2010
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies
View Related
Aug 17, 2010
I've had a computer running Ubuntu connected to my TV for a few weeks now, but as of yesterday, I can't get it to keep a connection to the Internet. Everything works well for an hour or so after a reboot, but then no WAN connections work. When this happens, no sites load in Firefox or Chrome, I can't ping Google, I can't SSH to the box from work, and none of the pages I have running on apache load from remote computers. However, all local area connections seem to work fine. SSH from within my LAN takes much longer than usual, but it does still connect.
View 2 Replies
View Related
Sep 1, 2010
The situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
View 2 Replies
View Related
Nov 1, 2010
I have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
View 2 Replies
View Related
Nov 19, 2010
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies
View Related
Dec 4, 2010
installed Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
View 1 Replies
View Related
Dec 16, 2010
I recently did a whole system wipe and got rid of windows all together!! Unfortunately, that means I have to start over with the whole networking thing. I know I have a bcm4311, but I have no idea what I have for a wired adapter. I know that I could search through everything to find what I need, but there is so much info for all the different versions. I have ubuntu studio. Can someone tell me the commands to type into the terminal to find out what I have for the wired network card and recommend a place to get the proper "drivers" to get my computer working again?
View 5 Replies
View Related
Jan 7, 2011
Running a wired connection through a Linksys router that suddenly stopped working today.I thought this was a ipv6 issue sinced I enabled some of those settings to share a connection with my PS3.I have since disabled IPv6 in Firefox and through the grub. The RealTek adapter will not even show a connection through the network manager when connected.The onboard adapter will show a connection, give me a ip address and MAC but still will not load the internet. I've tried uninstalling and reinstalling both adapters through the network connections, as well as reinstalling Firefox to no avail.I've also tried using Open DNS servers.I cannot ping through the network tools either. Hard for me to paste a ifconfig since I'm on my laptop.I'm running Ubuntu 10.10 (not dual booting).I did some updates this morning but it worked fine for a little while after that, until I tried to connect to my PS3.
View 3 Replies
View Related
Apr 20, 2011
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
View 9 Replies
View Related
May 4, 2011
A while ago i attempted to use ubuntu as my default operating system and it failed, i could not get the shares to work properly and i gave up. Yes i know, may be i should have kept going.
Any way, my problem is, Im attempting to use ubuntu 11.04 now, and this time i am realy keen on going through with this, however... for some reason when i connect my wired connection cable ubuntu keeps failing to connect. this is with the auto eth0.
Can any one help me with this problem? This is one of the major things that i will need to do if i want to switch over to ubuntu.
View 1 Replies
View Related
May 6, 2011
So I had 11.04 beta and after the official release I updated,rebooted and lost all wifi and wired connectivity.
On an Inspiron 9300
lshw -C network gives
*-network:0 UNCLAIMED
For my Broadcom BCM4401-B0 100Base-TX and *-network:1 DISABLED For my wirless interface Intel PRO/Wireless 2200BG
View 1 Replies
View Related
Jun 20, 2011
I'm running 11.04 on a Toshiba Satellite L350, and recently (well, for the past couple of weeks or so), I've been unable to connect to my network via a cable, only with wifi.
It isn't that it's unable to connect, it just doesn't show up in Network Manager.
My housemates, who run Windows, have no problems, so it's obviously something on my end...
Edit: I also tried connecting using wicd, but that doesn't detect it either.
View 1 Replies
View Related
Sep 1, 2011
I recently installed 11.04 on my PC (was running 9.04), and beforehand "tried it out" and networking was fine. I could access the internet no problem.I then ran the install, and fully formatted my HDD (i have 1 HDD for the OS and another for storage)It crashed halfway thorough, so no problem, i just re-formatted the hardrive and installed.However, It didnt connect to the internet, I literally tried every single forum looking for the solution, including editing the Network interface file.After a bit of diggingfound my user privileges did not allow me to connect to ethernet, and randomly use audio devices.SO, no problem I checked the boxes, but it still wont connect to the ethernet now, and it was fine before, tried re-installing twice with full format, but still doesnt work.
View 9 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Jan 3, 2010
It's been a while since i've been trying to deal with this problem but it was useless. I've found many related problems to this, most unsolved and those who had solution wouldn't work for me. I have few mates who have the same problem and still didn't find a solution as well. Here's the problem:
Both on my Desktop and Laptop, the network manager won't recognize that there is a cable pluged on the computer so that it would start my connection. The solution to make it work is pretty simple and its everywhere: use pppoeconf.
Altough that does the trick to make my internet work, i get another problem that i found out to be related to this one, which is: I can't use VPN. Which make me assume that one problem is related to the other, is that on my laptop, which has wireless internet, ubuntu will recognize it and then i can simple use vpn. My desktop, on the other hand, isn't that lucky and does not have wireless, so i can't just use vpn. So far, i've been using vpn on windows when needed, but switching systems is really a pain, not to say i'd rather do that on ubuntu.
Few other suggested solutions were to use 'wicd' and other network managers, altough for some people that did work accoding to what i saw on boards, that didn't really work out for me as well. Wicd coldn't recognize it either. Other suggestion was to check on some txt file on ubuntu, erase few information and let it 'fill up' automatic, it didn't work as well(sorry i don't remember all details on this one).
This problem happened on:
First, wubi for ubuntu 9.04
Ubuntu 9.04(normal install.)
Ubuntu 9.10
Happened both on my Desktop and my notebook, but the same version i installed on both of them were used on other computers and they did work on them so i strongly believe it has to do with the os itself.
View 2 Replies
View Related
Jan 11, 2010
I have the latest version of ubuntu on an HP dv4000 laptop fully updated. wireless worked out of the box. but the wired connection wont start. Problem is with the ubuntu install not the network. But i dont know how to configure it to work.
command: ifconfig
eth0 Link encap:Ethernet HWaddr 00:**:**:**:**:**
inet6 addr: fe80::***:****:***:****/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
[Code].....
View 1 Replies
View Related
Jan 18, 2010
I recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
View 9 Replies
View Related
Jan 30, 2010
I am having a persistent problem with getting a wired network connection under a recent install of Ubuntu 9.10. The network manager will show the wired network as 'disconnected' after a restart. This is true whether I am connected directly to my ISP's modem, or through the Linksys router that I usually use.The output of ifconfig suggests that eth0 is not being assigned an IP address:Code:I have reached the limits of my own ingenuity.
View 9 Replies
View Related
Jan 31, 2010
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies
View Related