Ubuntu Networking :: Eth1 On Computer With Only 1 NIC?
Jan 11, 2011
I am running Ubuntu10.04 as a Virtual Machine in virtualbox.I changed my Networking settings from NAT to Bridged Adapter and manually assigned IP addressing information for eth0 in /etc/network/interfaces. For some reason doing /etc/init.d/networking restart didn't bring up the network interface. So i replaced the new /etc/network/interfaces file with the original and rebooted. Now I have eth1 in place of eth0. Under System>Preferences>Network Connections I have Auto Ethernet and eth0. However running ifconfig shows lo and eth1.
View 9 Replies
ADVERTISEMENT
Apr 20, 2011
I have a computer with two interfaces eth0(LAN) and eth1(WAN).I have followed some guides on the internet and came up with this iptables configuration:
# Generated by iptables-save v1.4.4 on Wed Apr 20 09:43:12 2011
*nat
:OUTPUT ACCEPT [0:0]
[code].....
View 2 Replies
View Related
Mar 4, 2011
I need to setup two ethernets in my Centos box. OK no problem both ethernet and 1 virtual works perfect. eth0, eth1 and eth1:0. I'm trying to set up diferent routes for eth0 and eth1/eth1:0 I need eth0 has a 192.168.1.1 gateway and eth1/eth1:0 192.168.1.100 gateway.I think I've tried almost every thing but always get one gateway for all the eth.These are my config..
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:XX:XX:XX:XX:XX
inet addr:192.168.1.168 Bcast:192.168.1.255 Mask:255.255.255.0[code]......
View 7 Replies
View Related
Jul 30, 2010
I try to generate a server client code. What i try to do is sending video streams from eth0 and eth1 to the other server programs' eth0 and eth1. In order to do that, i decided to use SO_BINDTODEVICE. But the code is not working. Am i misunderstood the usage of SO_BINDTODEVICE.
1-Defining two ports
2-Defining two sockets
3-Assigning host ips on them
[code]....
View 3 Replies
View Related
Sep 27, 2010
I have a hardware device with two ethernet ports, eth0 and eth1 running Centos 5. Basically my goal is to forward packets from eth0->eth1 and eth1->eth0 as well as get a copy of these packets for analysis. If I set IP routing to do the forwarding then I won't get a copy of the packets for analysis.
View 3 Replies
View Related
Jan 16, 2011
My wireless suddenly no longer works either in Ubuntu 10.10 or Windows 7. Upon some investigation, I have found that my eth1 is no longer showing up as it used to.
What can I do to get my wireless back?
Right below is some current specs, while below that is an older set of specs from a while ago.
Code:
sef@sef:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code]....
View 2 Replies
View Related
Apr 28, 2011
I'm having a strange problem. I'm using Ubuntu server 10.04 LTS and I want to setup a system with 2 network interfaces: eth0 and eth1. However eth1 does not come up at boot I have a screenshot of my /etc/network/interfaces file I don't see what is wrong. eth0 gets it's adress from DHCP eth1 gets a static adress. When i try to restart networking it quits with this message "don't seem to be have all the variables for eth1 inet" Can anyone point out what I'm doing wrong? if i do 'sudo ifconfig eth1 192.168.3.1 netmask 255.255.255.0 up' eth1 comes up
View 3 Replies
View Related
May 2, 2011
I have static eth1 defined. When I boot or restart, the networking will not start automatically - i must do it from terminal by ifup eth1.
Where can I put this command to have it autostart?
View 5 Replies
View Related
Jun 1, 2011
I am working on USB Connectivity between android 2.1 Host and Windows Mobiles 6.1 device...When I connect the windows mobile device to android host through USB (in RNDIS Mode), It is appearing as 'eth1' interface instead of 'usb0' interface. Why 'eth1' instead of 'usb0' ? Does behaviour of 'eth1' is same as 'usb0'?
View 8 Replies
View Related
Sep 18, 2010
How can I configure ssh to only listen to eth1?
View 4 Replies
View Related
Jan 22, 2010
how can I change eth1 mac address permanently in an easy way?
View 1 Replies
View Related
Jan 31, 2010
It is. I think this might be the reason why my $wireless objects don't work in Conky?
View 4 Replies
View Related
Jul 13, 2010
I have an older laptop, a Toshiba Satellite Pro 6100 that has a switchable internal wireless connection. It will not connect to my router. I am using the 10,04 netbook remix. When I use lshw in terminal this is what I get:
*-network
description: Wireless interface
physical id: 1
logical name: eth1
[Code].....
Should it not be identified as wlan0? I know a whole lot about Ubuntu linux because I don't. I did a clean install over XP and am using this laptop as a learning tool for linux in hopes to divorce windows completely.
View 7 Replies
View Related
Aug 24, 2010
I have a bit of a "unique" situation here. I have myself plugged into two networks - since we run two networks here at work (long story, we merged and never combined them due to two different companies) and want to block ALL internet access off eth1, and only have it off eth0. I only want traffic from 192.168.67.1-192.168.67.255 allowed on eth1, but everything allowed on eth0. Or is there a way for the internet/applications to be on eth0 instead of eth1? Would I use iptables or something?
View 4 Replies
View Related
May 11, 2011
im a linux noob dont get techy ill die of brain fry im running a craft bukkit minecraft server on my 11.04 ubuntu server. however the server uses my only 10m Ethernet cable that i normaly use for my ps3 (i will NOT go wireless. i hate it (or dont like it)) therefor i found an old PCI NIC in an old computer, its a 10/100 realtek one. ifconfig detects it (after two commands:
Code:
ifconfig eth0 up
dhclient eth0
)
now i need to send the internet to my ps3 too.i know the connection wont be blazing fast but isnt it okay?it musnt interrupt the minecraft server. if you need info just ask. ill try and provide them.
View 1 Replies
View Related
Nov 30, 2010
I've noticed that when Linux boots on different machines or with different versions, the network card is assigned to eth0 or to eth1, when there is only one network card. What is the difference and is there any way to tell which one it will be for any machine or version?
View 2 Replies
View Related
Sep 14, 2009
I often run "gulp", a networking utility, to capture data from an instrument on "eth1". By default gulp must be run as root to have access to the ethernet port, and when I'm the only one running it, that's fine. But I need to let several other users to capture data and don't want to give them all sudo permissions for both gulp, and more importantly, 'chmod'. Is there anyway to change the permissions of eth1 to allow all users to open it and avoid sudo entirely? This is on a Red Hat/Fedora machine.
View 1 Replies
View Related
May 4, 2011
I installed Slackware 13.37 console only.
I have two ethernet cards.
I want to change eth1 to eth0 and eth0 to eth1, because I have some old firewall script and I need eth0 be eth1, because of routing internet. My ISP close my net connection on MAC adress.
View 2 Replies
View Related
Jan 12, 2010
I am trying to setup linux box as router.
What i am trying to do is:
1. I am trying to setup NIC via network not NetworkManager
2. I have assigned the ip to both NIC with #ifconfig eth0 192.168.1.1
3. #Ifconfig shows my nic and ip
4. restart the service network .
5. #ifconfig shows nothing. NO NIC card
I dont want the network manager coz i dont want to install the gui on router and network manager works only in gui mode. ( i think my this understanding is correct)
I tried to configure the NIC with Network Manager
When ever i restart the network service i have no out put from ifconfig
I tried to configure the NIC with #setup command as well and select the dhcp option
I can not find any ifcfg-eth0 in /etc/sysconfig/networking-scripts/
View 6 Replies
View Related
Mar 4, 2010
I've got a machine running 9.10 with two network interfaces, one being motherboard based (atl1) and the other in a PCI slot (e100). By default at boot the interfaces come up in the wrong order. I'd prefer to have the e100 come up as eth0 instead of eth1. And then have the atl1 come up on eth1 instead of eth0. Both interfaces use static addresses and IP4 routing should be active across them. Where do I configure things to force the specific settings?
View 2 Replies
View Related
May 30, 2010
I'm trying to set up my cell so I can use cellular internet in ubuntu like I do in windows. I've scoured the net, and found multiple guides, unfortunately, the problem I'm having seems to precede any of these. I can't follow the guides because I can't get to the first step. When I plug my phone in via USB, whether I'm using the internet sharing program or not, I see "eth1 connected eth1 disconnected" pop up over and over and over.
My /var/log/messages reads:
Code:
May 30 20:55:21 foxbox kernel: [ 1016.792334] eth1: unregister 'rndis_host' usb-0000:00:1d.0-2, RNDIS device
May 30 20:55:21 foxbox kernel: [ 1017.150089] usb 5-2: new full speed USB device using uhci_hcd and address 51
May 30 20:55:22 foxbox kernel: [ 1017.810267] usb 5-2: new full speed USB device using uhci_hcd and address 52
May 30 20:55:23 foxbox kernel: [ 1018.820096] usb 5-2: new full speed USB device using uhci_hcd and address 54
May 30 20:55:24 foxbox kernel: [ 1019.480105] usb 5-2: new full speed USB device using uhci_hcd and address 55 .....
View 1 Replies
View Related
Oct 20, 2010
I have a linux machine with 2 ethernet ports(eth0 and eth1). eth0 is connected to a router which assigns it an IP address 192.168.1.2. eth1 is connected to a switch and I assigned it an IP address 192.168.1.254 using "ifconfig eth1 192.168.1.254 netmask 255.255.255.0 up". How do I ping eth0 from eth1?
View 5 Replies
View Related
Oct 27, 2010
I am using ubuntu cli 10.04 for several different computers with different network cards, any time I plug in my persistent usb (ubuntu installed on usb) to computer the network would not work, when I find out what is up I see that it is up on next eth driver, I cant enter up to 50 or 100 or 500 entry there all the time and same thing with wireless since I use radius authentication its even makes it worse.
So to summarize:
sudo vi /etc/network interfaces
auto eth0 ifup dhcp
iface eth0 inet ...
...
...
auto eth100 ifup dhcp
iface eht100 inet ....
How to keep one entry for all those different computers (one for eth0 and one for wlan0)?
View 3 Replies
View Related
Dec 9, 2010
Im setting up a server thats connected to a large network. Now my external ip on the network is static and is 10.0.12.15. What I want is to create a dhcp network using the second port of my box. The first port eth0 goes to my network with the static ip 10.0.12.15 and my second port is connected to a switch with the static ip 192.168.12.1. Now dhcp works fine but none of the boxes that are connected to the internal ip cannot connect to the internet. Iv tried using squid and manual static ip routes. Im not using network manager or anything cause its a command line server.
View 1 Replies
View Related
Apr 26, 2011
installed UB10.10 on a dell d800 laptop with a built in wireless.The eth1 wireless device/connection shows up on the little radio icon as connected .but the chrome browser says "ERR_name_not_resolved" when I enter a common url.What's the next step or hint for gaining full internet access ?
View 4 Replies
View Related
Sep 1, 2011
Once or twice an hour or every few hours the interface will drop off. When this happens and comes back up and ssh sessions I have open will sit there and lag for 15-20 sec while, I assume, the connection is re-established. Any sessions I have open to the mySQL database will be dropped and I'll be given error messages associated with loosing connection to the SQL server. I have run a constant ping against the server and when the interface seems to drop off I'll get 10 or so host unreachable and it'll then start to reply again. This happens with both eth0 and eth1 on this Dell Poweredge 850 running 11.04. I have done a "sudo lspci -v" on both the server acting up and another Natty box that doesn't have this issue but the same hardware. They both are using the same driver versions though it seems certain options are slightly different between the two.
Working Server:
Code:
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
Subsystem: Dell Device 01b6
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts:Mask-64bit+ Queue=0/3 Enable-
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [13c] Virtual Channel <?>
Kernel driver in use: tg3
Kernel modules: tg3
Broken Server:
Code:
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
Subsystem: Dell Device 01b6
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable- Count=1/8 Maskable-64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Kernel driver in use: tg3
Kernel modules: tg3
I've checked the cable, it's a pre-made with both ends looking good. I even swapped it out for a fresh home made cable and the problem still persists.
View 1 Replies
View Related
Apr 1, 2011
I have the following setup: An ADSL Router (192.168.4.1) which plugs into my server (that has 2 network cards) Server(eth0-connecting to the ADSL Router) = 192.168.4.2 Server(eth1-connecting to the windows XP PC) = 192.168.4.3 And the windows XP PC = 192.168.4.4 if I delete the entire routing table and add a default route route add default gw 192.168.4.1 dev eth0 I get an error (I can't remember the error, the PC's at work) however if I unplug the cable going from the PC to eth1, I can then successfully add the default route, and I can ping the router, however when I reconnect the cable to the PC and Server... I can still ping the router (from the server) but I cannot ping the PC
if I try and add another route such as: route add -net 192.168.4.0 netmask 255.255.255.0 gw 192.168.4.4 it wont let me add the rule I have a feeling i am doing something really stupid here with the addressing scheme,
View 2 Replies
View Related
Jun 5, 2009
i have installed centos 5.1 but it won't recognize 2nd nic card (eth1). i was unable to install the driver supplied by the cd. i am using intellinet gigabite pci network card. the network card recognize by centos 5.3 but i need to use centos 5.1. i also tried another intel gigabite adopter but it also won't recognize by centos 5.1.
View 2 Replies
View Related
Jun 7, 2010
I've been trying to get my old laptop (Toshiba Satillite A25-S207) to come up on my LAN and connect through a LINKSYS ROUTER WRT 160N V3. My router has been operational for at leased 2 months with no problems. The status logs reveal all other devices are connected. The Toshiba eth1 does not show in the router log during any attempts to connect. Also, pinging from the Toshiba laptop to the router's IP:192.168.1.1 times out. Using the ping routine from the routers internal diagnostics menu times out for the laptop.I have gone over the FAQ's and post concerning troubleshooting and setup of the wireless network interface. I have dumped wireless information as "super-user" using the suggested routines (i.e. lshw, lspci and the system test from the ADMINISTRATION MENU from the desktop task bar,etc...)
These have revealed I do have some sort of configuration problem or conflict. I'm just not savvee enough to work this out. The wireless interface apparently is using the orinoco driver and the wired interface eth0 is using 8139too driver.I forgot to add, that the router is secured by WEP key. Also, I disabled the WEP which did not change the connection problem. I used the manual setup from the taskbar and made incremental changes with the encryption setting with no results. I didn't expect to affect the status. Because, I noticed that the WEP key didn't seem to configure in the settings the interface as reflected by the attached text.
View 4 Replies
View Related
Apr 3, 2009
I have two network devices :
1. Intel Corporation 82574L Gigabit Network Conncection (Currently eth0, Mac=00:0e:8c:ab:c6:b1)
2. National Semiconductor Corporation DP83815 (Currently eth1, Mac=00:0e:8c:8a:70:62)
I want to change them so that the "Intel" become eth1 device and the "National" become the eth0 device.
I already tried these steps :
1. I disabled the Network Manager and enabled network
2. Edit the /etc/udev/rules.d/70-persistent-net.rules like this
Quote:
3. Change the /etc/sysconfig/network-scripts/ifcfg-eth0 and /etc/sysconfig/network-scripts/ifcfg-eth1 MAC addresses.
4. Reboot
5. After it bootup the Fedora can't recognize the devices, if I do ifconfig -a it shows "eth0_rename with FF:FF:FF:FF:FF:FF mac address".
View 3 Replies
View Related
