Ubuntu Networking :: Create A Single User ISP Over DSL?
Oct 28, 2010
I have a good question. I have a friend that lives in an area where he cannot receive DSL or Cable internet. He has a phone line, and physically able to get DSL, but the company won't give him service. He has Verizon wireless, but the reception is bad and his service gets dropped too much.
I however, have DSL 3.0Mbps and want to know how I could get him a DSL modem to dial up to my server at my house and receive internet. I know that I would probably need two phone lines to do this, but apart from that.
View 2 Replies
ADVERTISEMENT
Sep 28, 2010
What is the command I need to create a new user and give the user only permission to a single folder via ftp?
View 3 Replies
View Related
Jul 28, 2010
I have just taken on a dedicated server sitting somewhere in Norfolk. I have created a website that uses PHP to connect to another remote server in order to interrogate a MSSQL database. This script, running on Apache, uses a VPN connection to connect to the remote server.To test, I have Apache on my laptop at home and just used Microsoft Network Connection to create the VPN connection.I have now uploaded this site to my new CentOS server and need to create the same VPN connection. I understand this is a command level and have been advised to use OpenVPN which I have successfully installed.My problem is I only have the details remote ip address, username and password. I believe I have to use the 'client.conf' script instead of server.conf.
View 1 Replies
View Related
Nov 9, 2010
How do I create a user account without Internet access?
View 8 Replies
View Related
Jul 23, 2011
when i want set quota for a user is use: "edquota -u root"
but if i want set quota for all user, and create a default for new user, what should i do ?
View 1 Replies
View Related
Aug 7, 2009
I need to create an SSH user that can only access the directory I would specify for them. For example, I've been able to execute the following:
useradd -d /home/me/directory_for_this_user someuser
So when someuser logs in they get into this directory. Problem is that once they log in they can simply execute:
cd /
and navigate through all other directories which is a security risk.
How I could limit someuser's access to only /home/me/directory_for_this_user and its subdirectories and nowhere else in the system?
View 1 Replies
View Related
Jan 18, 2010
I wanted to create an user but don't allow it to see the other user's home folder so I made chmod 0750 /home/folder and it worked fine so I went ahead and decided to completely forbid access to the root folder and I had the "great" idea to make chmod 0750 /, and now I'm having problems with wine and other applications, in example I used to have a folder in this address 209.239.114.51/mmgr but now it's giving me errors and if I try to run some applications I got error "There was an error creating the child process for this terminal"
View 9 Replies
View Related
Jun 23, 2011
Is there a way that I can have a user on my Ubuntu 11 box that when logged in it automatically opens X program and nothing else, no window manager nothing, single program for that user only?Here is the scenario, I have 3 users, one is called Skype. I want when someone logs into the skype user no window manager at all be available to that user from the GDM and for xwin to automatically start skype up.
View 1 Replies
View Related
Sep 3, 2010
This netbook only has a user with non-administrative privs on it and root user but I do not have root's password.Is there a way that I can create a new administrative user of change the current user's group so that it can do sudo commands or have more privs?
View 1 Replies
View Related
Nov 9, 2010
Im following an installation guide (Oracle ASM) which requires me to create a partition on the disk and gives the following example: Code: fdisk /dev/mapper/< alias >kpartx /dev/mapper/< alias >< partition > Im struggelling what <alias> and <partition> need to be substituted for, I have tried to look this up but all that is returned are bug fixes etc generally things that dont make much sense to a newbie like me.
View 8 Replies
View Related
Sep 7, 2010
How do I get into Single User Mode in 10.04?
The grub menu seems to be gone in 10.04, and the computer boots in 2 seconds. It's great that it boots fast, but there has to be some way to specify boot options?
/etc/default/grub says the timeout is 10, but that doesn't seem to be the case.
View 4 Replies
View Related
Sep 18, 2010
I have a quick question that I haven't been able to find an answer for so far. Is it possible to 'hide' a user from the user list in gdm? Note that I don't want to remove it entirely, I just want a user that you can only get into by clicking 'other', entering your name and password.
View 2 Replies
View Related
Nov 22, 2010
I'm running mythbuntu on 10.04 with an AMD athlon and nvidia geforce4 (nvidia-96) graphics. Shortly into the boot procedure, the system appears to switch into single user mode, killing all the processes I want running and dropping me into the recovery menu.
On 20 Nov I was having problems booting the system, which I traced to a probably loose sata cable to the (single) hard drive. While working on this I performed a normal system update, and then started having the problem described above. the update included
menu 2.1.43ubuntu1
libc-bin 2.11.1-0ubuntu7.5
plymouth 0.8.2-2ubuntu2.1
grub-pc 1.98-1ubuntu8
xserver-xorg-core 2:1.7.6-2ubuntu7.4
initramfs-tools 0.92bubuntu78
[Code]...
View 3 Replies
View Related
Mar 4, 2010
I'm installing Ubuntu to be used as an NFS storage server for my VMWare ESX servers. I've got a server that has two 2TB drives in it. The hardware raid controller isn't an option because it only sees up to 1TB of each drive. So, I'm trying to figure out to do this using either LVM or Parted. I don't know much about doing this, and LVM was the first thing I tried but it didn't seem to do much. It looks like it just created a smaller partition to install Ubuntu on. It didn't ask me what I wanted to do with the rest of the drive space. I've messed around with Parted and am not sure what to do, to be honest. I found a few blog posts but most started off assuming that I knew how to get to where they were starting from.
It's just two drives, /dev/sda /dev/sdb
View 3 Replies
View Related
Mar 14, 2011
I would like to create a bash script that creates a single group from all users in other groups.
I've been at it most of the day, and I think I'm making it too complicated. I have about 100 lines of code, and it's still now working the way I would like. I'm starting to trip over my own feet with the amount of if statements and variables.
View 1 Replies
View Related
Feb 2, 2010
I want to add 50 new users, not on the server yet I want to add them all to group Accounting - with 1 option, not user by user I want to setup a default password for them all, and have it say something like 'You must now change password or no access will be permitted' Any other options I also want to do once, not for each user?
View 3 Replies
View Related
Sep 3, 2014
I have just installed vsftpd on my debain server..I want to know how can I create a new user called mesk as FTP user and set a home page to some folder on my server? I tried this:
Code: Select allhtpasswd -c /etc/vsftpd/passwd mesk but got: cannot create file /etc/vsftpd/passwd.
View 3 Replies
View Related
May 12, 2011
i have rhel 5.2 and i want to create user using useradd command without creating user home directory and not throwing any warning/error about not creating any home directory.i have tried useradd -u "$NEW_UID" -g <gid> -d "/home/$1" -M "$1"where $1 is user name and $NEW_UID is i am calculating.it throws error as useradd: cannot create directory /home/$1which i dont want to come , how to prevent this?
View 1 Replies
View Related
Jan 17, 2011
I have a Lucid Ubuntu installed on my home PC with two user accounts, AmHero and simple. I would like to have all internet access disabled when my kids login with the 'simple' userid. And yes, internet should work when I login using AmHero. I tried this:
[URL]
..but this does not work and gives some errors on the terminal.
I can paste the errors, though I am not sure this will even work as I found this in an old post.
View 6 Replies
View Related
Apr 5, 2011
I'm trying to disable multiple logins for a single user on Ubuntu 10.10 but I haven't been able to find a way to do this on this version
View 4 Replies
View Related
Jun 15, 2011
How can I, a single user, stop the hassle of having to constantly log in. Ubuntu 11.04 is what I currently using.
View 7 Replies
View Related
Apr 15, 2009
I've been looking for this feature for months and couldn't find a solution for this. Does anyone know how to create users and limit the user to a specified directory?
View 6 Replies
View Related
Mar 22, 2009
what things can i do in single user mode?is there a guide out there can help me out how to navigate in single user mode?in links that focus only on user user mode?being in single user mode in other istro all the same? debian, fedora, suse. etc
View 4 Replies
View Related
Aug 10, 2010
I've created Oracle Enterprise 5 Virtual machine. It was running fine but not sure what went wrong and now when ever I reboot the machine, it goes to single user mode. If I enter "init 5" command it boots to multi-user X11 mode without any problem.I checked inittab file and default line has id 5. So it looks OK. What else can be wrong?
View 15 Replies
View Related
Jun 10, 2011
I have a user that can ssh to every computer on our network expect for one. I verified that it has to be the account by having the user ssh from a different computer. the results were the same.
View 2 Replies
View Related
Mar 18, 2011
I am running redhat ES 5 on a dell server and recently, I ran into a snag where I was able to reduce a partition (ext3) but could not run resize2fs (mismatch between physical and logical blocks (i never found a solution to this). In any case I decided to log in a single user mode (appended 'single' at the GRUB loader prompt) and now I am always taken to this single user mode every single time I reboot and can't seem to get out of it. I have tried init 5 (runlevel that the system is set to boot into by default) but that does nothing (no message on the # prompt).Of course, I have 2 problems here:
1) partition issue
2) cannot log out of single user mode.
View 6 Replies
View Related
Mar 20, 2011
i'm trying to make a folder on fat32 partition named NEW by typing in console mkdir NEW, then i open PCMan file manager then go to that folder at first the folder name was NEW but after i doubleclick it and go back the folder name was changed to 'new'then i tried to rename it to NEW but it says file exist then i tried to rename it to 'not new' (this time inside PCMan) and it work then i rename it again to NEW, go into that folder and go back again... the folder name changed to 'new' again.anyone know why this happen?? this doesn't happen if i make the folder name more than one word such as 'NEW NEW'
View 2 Replies
View Related
Apr 24, 2010
I have an unencrypted DVD that is one big title, ie you cannot skip next / prev. What I want to do is reauthor the DVD with title at certain points, so that I can skip next / prev when watching it.
I'm using Ubuntu 8.10
View 1 Replies
View Related
May 2, 2010
I want to fix my disks with fsck but using sudo init 1 is not allowing me in. It shuts my services down, then gives a "Give root password for maintenance" prompt. I've tried my password, but it rejects it.
View 3 Replies
View Related
Jul 12, 2010
I would like to install ubuntu on my imac g4 but osx won't boot so I wanted to
to use ubuntu is there any way to eject cd from single user mode?
View 5 Replies
View Related
