Ubuntu Networking :: Connect To Server When VMware Is Running Windows?

Jan 15, 2011

I have a private server which I stream media from, but since I've installed VMware running Windows 7 and set up Windows to used a bridged connection, so I can access the network drives in Windows. Now that I have done that, I cannot connect to my home server unless I have VMware running.

I only want windows running when I need it, but I need access to my server at all times.

View 1 Replies


ADVERTISEMENT

General :: Running Ubuntu 10.04 Inside VMware Player - Windows Vista - Can't Connect To The Internet

Jun 10, 2010

I'm running Ubuntu 10.04 inside VMware Player running under Windows Vista and I can't connect to the internet or the host computer from the Ubuntu.

I have set all the VMware services to manual (like VMware DHCP Service), but starting them manually doesn't help.

In VMware, the network seems to work (there is a green dot beside the network icon) and I have tried both Bridged and NAT settings.

ifconfig doesn't show the eth1 interface, unless I give it as a parameter (or use -a). I think this means that Ubuntu thinks that the network isn't connected at all.

View 1 Replies View Related

Ubuntu Networking :: Internet - Cannot Connect - But Can Connect Through XP On VMware

Aug 15, 2010

I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.

However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.

Here are some outputs:

I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.

View 1 Replies View Related

Ubuntu Networking :: OpenVPN Server Up And Running But Clients Can't Connect

Sep 28, 2010

I've been the las 4 days setting up my first VPN (OpenVPN bridged). The server is up and running OK but when I try to connect I've got this message in the client log.

Quote:

TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
TLS Error: TLS handshake failed

[Code].....

View 4 Replies View Related

General :: Attempting To Get BackTrack 5 Running With A VMware Virtual Machine On Windows 7

Aug 23, 2011

I'm running a 64bit Version of Windows 7. I'm also dual-booting 64bit Ubuntu 10.04 (if it matters). However, for this I'm trying to get this working on the Windows 7 side of things. I downloaded the BackTrack 5 32bit GNOME .iso file (BT5-GNOME-32.iso) to my USB stick fine and made a VM on VMware Player. I set the OS as "Other Linux 2.6.x kernel" (if it matters). However, when I go to play my VM I get the following screen. I know I'm supposed to type Startx to launch the GUI. However, nothing happens; it's completely unresponsive (and yes keyboard focus is routed to the VM). There is no response, the cursor doesn't even blink.

View 1 Replies View Related

General :: Could Not Connect Windows Host To Guest On VMWare

Dec 29, 2009

I am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.

Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare

View 5 Replies View Related

General :: How To Connect To Gateway In Windows (VMWare Workstation)

Aug 11, 2010

I cannot connect to the windows gateway from red hat Linux which is installed on VMware workstation. I cannot ping to the gateway from Linux.

View 2 Replies View Related

CentOS 5 Networking :: Iptables Not Opening Port To Connect Via Vnc To A Server Running 5.5?

Apr 27, 2011

I'm trying to open up some ports to connect via vnc to a server running Centos 5.5. I've edited /etc/sysconfig/iptables everything *looks* fine, but I still can't seem to get access to the port I've opened (I added some newlines for clarity between commands):

[Code]....

View 4 Replies View Related

Ubuntu :: Partition Recommendations For Server Running VMware ?

Mar 28, 2011

I presently have an Ubuntu server 64-bit running VMware Server 2.0 in a test lab. The server was created using the default partitioning method during the installation. So I have what I think is just one huge 300GB partition along with what I hear is a uselessly large swap partition.

I keep reading that theres an advantage to creating dedicated partitions, especially for the the VM datastore.

If the advantages are true then I would like to re-partition the drive.

What partitions should I define and how big should the be?

View 9 Replies View Related

CentOS 5 Server :: VMware Service Not Running

Feb 5, 2010

I just did a basic service install of Centos5 and added the RPM package install of VMware-server 2.02. but I don't the VMware service is running (based upon the flowing screen:

[root@centoshost1 vmware-mui-distrib]# ps
PID TTY TIME CMD
2925 pts/0 00:00:00 bash
22378 pts/0 00:00:00 ps

So how do i start the VM service?

View 3 Replies View Related

OpenSUSE Install :: 11.4 As VM Running On VMWare Server 1.0.10 Under WinXP

Aug 15, 2011

I am trying to install openSUSE 11.4 as a virtual machine running on VMWare Server V1.0. VMWare Server is running under WinXP 32bit.

I configured the VM with the following settings:

10GB disk
512 MB Ram

The installation starts from the DVD after inserting the disk. OpenSUSE setup appears, i do not touch the default resolution 800x600. Every thing is looking good. After setting the language, the installation process continues. Then a problem with the screen/resolution/graphical adapter appears. After a while I cannot read anything from the setup screen, everything is unreadable. I remember I had those problems already with 11.3 but I did not follow this issue an took openSUSE 11.1 instead. With 11.1 I could follow the installation instruction till the end and I got a running system.

View 7 Replies View Related

Networking :: Connect To A Server With Windows 7

Oct 25, 2010

I have generated a public SSH key in the server and it is located at /root/.ssh. Now i have a windows 7 system and i wanted to connect to that server using that key. How can i do that with windows server 7 as client

I know this is a silly question but i have books and none of them explain how to connect to a server with windows 7

View 1 Replies View Related

Networking :: Running A Mailserver Under Vmware Workstation ?

Jan 4, 2009

I want to run a mail server from within debian linux guest with vmware workstation xp host. The setup is a bridged network connection

Here are things that need to be done:

a)Configure the Guest with a static IP on my home network. Verify that I can telnet to port 25 of the Guest from a system on my home network.

b)Then configure my home firewall/NAT box to forward incoming connections on TCP port 25 to the static IP address I gave my Guest. Then test that I can telnet to port 25 from a system outside my home network.

c)After that I need to configure the appropriate DNS records for my domain so that outside hosts know how to contact my mailserver.

View 7 Replies View Related

Ubuntu Networking :: Connect To A Windows 2003 Server?

Jun 25, 2010

I'm runnning Ubuntu 10.04 Desktop, and i need to connect to a Windows 2003 server, i've clicked on places at the top of the screen selected connect to server and put in my detains in all the vairing options and i still cant get on.

if it could be explained that information i need and where i can get it from in XP, i also need to log in then i access it from xp.

View 4 Replies View Related

Networking :: Connecting To Nfs Server On Debian From A Client Running On Windows Xp Pro?

Nov 15, 2009

i installed unix services for windows 3.5 on a windows xp pro box and it installed fine. I configured nfs on the debian box and exported the ip of the client computer and forwarded port 2049 correctly. I followed the instructions for setting up teh nfs client on windows. However whenever i go to tools->map network drive and type in the server-domain-name:/file-address it says it cannot connect?

View 6 Replies View Related

Networking :: Connect System Pc To Windows Server 2003?

Sep 29, 2010

I am a primary school teacher at a school with hardly any money running 50 pcs on windows server 2003. We recieved 2 donated pcs without windows, so thought of installing a free copy of linux on them and then connect them to the server. Which linux version does this best and how would i do this?

View 6 Replies View Related

Ubuntu Networking :: Connect Desktop To A Windows Based Server At Work ?

Feb 21, 2010

How to connect my newly installed ubuntu on my desktop at work to the company's server that is windows based. I have my user name and password given to me by my it office but they could not help me set up linux.

View 8 Replies View Related

OpenSUSE :: Vmware Server Cannot Connect Virtual Machine Console?

Jan 29, 2010

Since a few weeks I cannot open a console in vmware server 2.0.2 anymore. I don't know exactly when this started because I use vmware only occasionally (I have only 1 program (an old Ashlar DrawingBoard) which does not run properly in wine). VMware server and the console have been working before without problems, but now I get the message "Cannot connect virtual machine console." and it times out. This is on Opensuse 11.1 with VMware Server on the same pc, Firefox and the guest is Windows2000.

I have tried to disable all extensions in firefox 3.6, disabled the firewall, even created a new user (on the same pc) with a clean firefox, all without any result. However when I connect from a different computer which runs Internet Explorer under windowsXP, then I can get the console without problem.

So, somewhere there is something wrong between Firefox and VMware server.

View 4 Replies View Related

Networking :: Connect VMWare Guest To Host?

Sep 14, 2010

I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?

View 1 Replies View Related

Networking :: VMWare Sharing - Cannot Connect To Internet

Apr 11, 2010

I am using ubuntu on a vm with 2 network eth0 ( internet, getting the ip by dhcp on modem adsl) and eth1 (10.1.1.1). In other vm an windows machine with 10.1.1.2 / 255.255.255.0 / 10.1.1.1 /10.1.1.1). I can ping to linux and windows with no problem. Then to share I used

modproble iptable_nat
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

But I still cant connect to internet on windows vm.

View 1 Replies View Related

Ubuntu Networking :: In VMWare - Unable To Connect To External Sites

Apr 12, 2010

Have just installed Ubuntu 9.10 in Vmware workstation 6.5.1 and unable to connect to external sites, or servers (using NAT). I can ping on host name and IP but can't resolve either host or IP in browser (Receive message the connection has timed out). I can't ping the host (Windows 7 Professional) IP from the guest and vice versa. I use a mobile wireless network card, and my Windows operating systems work successfully in vmware. Currently in my VMNet8 properties I just have Obtain IP address and DNS Automatically (same as host).

View 3 Replies View Related

Ubuntu Networking :: Unable To Connect To Internet From VMware Workstation 7.0.0?

Dec 15, 2010

I have Ubuntu Server 10.10 installed which is guest OS on a XP host. The problem is I cannot connect to the internet. I am using bridged network but still it fails to connect. what configuration should I change in VMWare or should I have to modify anything in XP.

View 1 Replies View Related

Networking :: Connect From Server Operating On Windows Os From System Machine Using Ssh ?

Aug 9, 2010

I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh

View 4 Replies View Related

Ubuntu Networking :: Make Connect To Freenx Server From Windows Using Nomachine Client?

Feb 24, 2010

I am not exactly newbie with GNU/Linux, but definitely new to SSH/NX stuffs. I followed the below tutorials for installing FreeNX so that I can access my desktop like TeamViewer in windows.

https:[url]....
https:[url].....

But I don't see the folder NX like the one mentioned here.Then edit the file /usr/NX/etc/server.cfg

I don't see a folder called NX to proceed. Also when I use nomachine client to connect from Windows, it couldn't connect and I get the below errors.

nxssh: <host-name>: no address associated with name.

how to make connect to freenx server from windows using nomachine client?

View 1 Replies View Related

OpenSUSE :: VMware Server And Windows Server 2008?

Mar 6, 2010

you can install vmware on opensuse but can you run windows server 2008 from vmware installed on opensuse?

not that i care, but the only use of vmware ive used is for network simulation

honestly i'm not sure what vmware is for besides that, exept i've heard for programming I think

View 9 Replies View Related

Networking :: Windows 7 Users Can't Connect To Samba Server After Dhcp Config

Jun 27, 2011

I have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.

This is the script I use at boot

Code:

#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE

[code]....

I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.

View 3 Replies View Related

OpenSUSE :: VMWare Workstation 7 Error "Before You Can Run Vmware, Several Modules Must Be Compiled And Loaded Into The Running Kernel"

Sep 21, 2010

im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:

[Code]..

When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:

[Code]...

View 9 Replies View Related

General :: Vmware Server 2.0.2 Installation On 12 - Making Sure Services For VMware Server Are Stopped

May 19, 2010

I have installed fc12 on my core2due machine, and I have installed the vmware server on it, its rpm is installed successfully with out any error, after that a message is displayed

The installation of VMware Server 2.0.2 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "rpm -e VMware-server".

Before running VMware Server for the first time, you need to configure it for your running kernel by invoking the following command: "/usr/bin/vmware-config.pl".

I tried this command and find the this message

[Akram@localhost Downloads]$ su -c "/usr/bin/vmware-config.pl" Password: Making sure services for VMware Server are stopped.

None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [yes] yes

Using compiler "/usr/bin/gcc". Use environment variable CC to override.

Your kernel was built with "gcc" version "4.4.2", while you are trying to use "/usr/bin/gcc" version "4.4.3". This configuration is not recommended and VMware Server may crash if you'll continue. Please try to use exactly same compiler as one used for building your kernel. Do you want to go with compiler
"/usr/bin/gcc" version "4.4.3" anyway? [no] yes

What is the location of the directory of C header files that match your running kernel?[/usr/src/linux/include]

Now it asks me in last lines that "What is the location of Directory of C header files that match your running kernal?"

View 1 Replies View Related

OpenSUSE Install :: 11.2 On VMWare Server 2.0 With Windows XP Host ?

Feb 9, 2010

I just had one hell of an experience trying to get openSUSE 11.2 to run on VMware server 2.0 on a Windows XP host. I am posting some instructions on how I finally got things working.

1) Download the openSuse iso image (and add-on CD if needed)

2) Download and install the VMWare server

3) Before you try to start the server console, you will need to configure the web access to allow you to log on. go to press Start->Programs->VMware->VMWare web access->Configure Tomcat

4) on the logon tab check logon as: option

5) add your account there and set the password

6) Now in your web browser (I use firefox) access the console via: [url] [url]

7) Before you start to create a virtual machine, you will want to set up the server to have access to your iso's. The server will only allow VM's access to specific directories through "datastores". You can either move the iso images to what has been specified as the default datastore... or create another datastore that points to the where you have the iso's.

8) Now we can create our virtual machine. This is simple, just press the button and follow the prompts.

a) at some point it will ask about an CD-Rom, you will want to use your suse DVD iso image. Select the option and then navigate the datastore that contains the image. Once found click and continue.

b) Network interface has 3 choices:

Bridged - the virtual machine will appear on the network as any other computer. Allows the VM to host server applications. User needs to have control over the network to ensure DHCP requests are handled (or static IP is assigned).

NAT - VMWare server will manage a virtual router, the VM is then connected to this router. On this router, the hosts internet is used as the WAN. Users do not have to have control of the network, but will have to setup port forwarding in VMWare to host server applications

Host Only - This means that the virtual machine can only talk to the host. The only way to get networking is to have a proxy through the host machine. This is setup on the host independent of VMWare. Users do not need control of the network, but control over the host. I doubt you could host server applications though.

9) With the VM created we can start it up. We can open a window to it through the console tab of the VMWare server console. When I first started it, it was stuck looking for an OS once the console finally rendered the graphics. A reset, an F2 at the post and selecting the appropriate boot media for boot got the installation started.

10) Install Suse as you would any other suse installation. I added a separate partition for swap, but kept the rest on one big one. Others may still want to maintain the separation of home and root

11) ---- Important Error/Solution ----

Once the installation has completed many will notice that the mouse or keyboard does not work! This was the source of my biggest head-ache. Some may think it was a problem with VMWare tools... I tried that to fix that and found the tools were working properly.

View 7 Replies View Related

General :: Programmatically Connect To A Box Running Ssh From A Windows Pc?

May 11, 2010

I am writing an application that has a web service client on a Windows PC that needs to call a web service on a Linux server. In order to create the client, I need to be able to programmatically read the WSDL on the server and use it to create the client. I'm using the web tools in MyEclipse to build the client.

The Linux server is running Red Hat, I believe, with ssh enabled. I can connect from Linux to Windows with no problem, but I can't reach the Linux box from Windows. I get one of three errors when I try: no path to host, connection reset, or unknown error number, depending on the port I use. I've googled for an answer, but haven't found anything yet.Is there some way to add the Windows IP to a permission file on the Linux machine so it will be recognized when it queries for the WSDL?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved