Ubuntu Networking :: Can't Finde The Driver On Line?
Feb 12, 2010
I have bean trying to uzip and install the ndiswrappper driver for my Atheros AR5212/AR5213, well first I can not finde the driver on line, secondly I have tried to unzip the driver from the CD that came with Atheros AR5212/5213 that did not work "WDA2320.exe"plus the ndiswrapper help files are not explanatory enough for the different scenarios, thirdly I installed the ndiswrapper interface that installs on the desk top, that worked for a while then stopped altogether, I have bean working on this ,on and off for about a year,my O/S is Debian Lenny Betta -2- i386 I have attached a document coled Atheros doc pertaining to the hard ware in my P/C
View 1 Replies
ADVERTISEMENT
Jul 27, 2011
I used yum to install gkrellmd package and after that i cant find config fail location or even run gkrellmd service.Therese is noting in /etc folder.i tried yum -c gkrellmd, command gives me error.
View 3 Replies
View Related
Mar 12, 2010
Does anyone know a way to force a driver activation, or driver install from the command line in recovery mode?Even better, is there a way to force a driver installation from the "(initramfs)" prompt?We're having problems installing the drivers for a PNY GeForce FX 5200 256MB 128-bit DDR PCI Video Card. It goes straight to the "(initramfs)" prompt with the new card installed and, without the card installed it won't allow any drivers to be activated via Administration>Hardware drivers.
View 4 Replies
View Related
May 7, 2010
I got given an old (non brand name) laptop and have installed XP and kubuntu 10.04 on it. The graphics card is Radeon Mobility X1600. Kubuntu gets a very strange problem which does not happen in XP:
Although the installation graphics are OK (sort of, there are some strange font irregularities), when it tries to reboot and fire up the graphics all hell breaks loose, the display is broken in two parts and shifted up with the overflowing region coming up from below. I 'm guessing something in the X server is trying to start and failing because when I try to drop to a text terminal (Ctrl-Alt-F<something or other>) I get pages filling up with error messages.
Unfortunately I can't remember what the messages say and I don't want to try to recreate it in a hurry because after this happens, subsequent reboots start the computer in this split screen mode (weirdly omitting the BIOS POST message) and I 'm not sure how to get it fixed, so far removing the battery, reseting the BIOS to default and letting it cool down seem to work, eventually.
Anyway, I figured since XP seems to be fine, it must be a software problem, although I 'm mystified how it persists and jumps between reboots (the split screen persists even all the way to the BIOS menu). I tried getting the driver from the ATI site code...
Removing temporary directory: fglrx-install.i3fXeb
So, if I can't run the ATI driver, my other option is to run whatever it is that the "Hardware Drivers" KDE menu item runs to get it to sniff out the driver I need. But I can't start an X server so I need to either run whatever it is that runs behind it or get the package I need through apt-get?
View 1 Replies
View Related
Nov 24, 2010
My daughter just broke her laptop screen. I can order another LCD - no problem, but until then she wants to use an external monitor. With Windows, this used to be no big deal, because I would hook up a monitor, hit a key combo on the keyboard, and everything would come up on the other monitor.I know how to do this using the GUI, but unfortunately, I can only see about a 2 inch strip at the top of her computer. I can see the gnome menu bar, and when I go into the Nvidia configuration, I can't make out anything below the tops of the two monitors it detects. (I was able to get it to detect both displays, but I can't see to press the "configure" button.)What I need to do, is configure the new monitor from the command line using the two inches of visible monitor that I have at the top of her broken LCD.
View 8 Replies
View Related
Mar 22, 2010
I'm having problems with my Nvidia card. X doesn't work after installation (9.10), only command prompt. I've read the instructions at http://www.psychocats.net/ubuntu/nvidia on how to enable Nvidia drivers, but the instructions are only for GUI, which I don't have.
Anyone knows how to enable Nvidia drivers from command line ?
View 2 Replies
View Related
Dec 28, 2010
I am having some problems trying to find drivers for a couple of things that I have for my maverick meerkat 10.10 operating system. and the following items I need help with is a Microtek scanmaker x6 scanner, a logitech usb quickcam chat video camera, and a microphone (which I do not know the manufacturer). were I can find drivers for these three items so that I maybe able to use them. I also am having trouble with hearing videos on line, and have a problem with the drivers to be able to play dvds on my computer which I used to be able to do. there are other problems that I do not want to discuss at this time but will probably find the answers to them soon.
View 1 Replies
View Related
Jun 7, 2011
Cutting a long story short (my machine won't allow me to login without the proprietary fglrx driver installed), how do you install the fglrx driver in Natty, from the console? he following commands have been suggestedbut haven't worked:
Code:
apt-get update
apt-get install fglrx fglrx-amdcccle fglrx-dev
[code]....
View 2 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
May 13, 2010
I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?
View 2 Replies
View Related
Nov 19, 2009
I compiled the 2.6.31.6 kernel and <insert drumroll> it boots!(my first kernel roll, I'm kind of shocked actually) That's the good news. The bad news is that my NVIDIA drivers are gone in the wind. That's not entirely true as I can still boot into the old kernel and startx. Is there a way to download the driver using the command line for reinstall?
View 4 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Jul 17, 2010
Whenever I boot my system, I get this error:
Quote:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1254 Segmentation fault [FAILED]
I also noticed that 3d acceleration was not working... I always launch Blender to test if 3d works, but not luck
My system:
Code:
2.6.33.5-124.fc13.x86_64
Nvidia GeForce 9800Gt
akmod-nvidia 195.36.24
Yes, nouveau is blacklisted:
Quote:
kernel /vmlinuz-2.6.33.5-124.fc13.x86_64 ro root=/dev/mapper/vg_desktop-lv_root rd_LVM_LV=vg_desktop/lv_root rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rdblacklist=nouveau
[code]....
View 14 Replies
View Related
Mar 22, 2011
I have two files, file1.traj and file2.traj. Both these files contain identical data and the data are arranged in same format in them. The first line of both files is a comment.
At line 7843 of both files there is a cartesian coordinate X, Y and Z ( three digits ). And at line 15685 there is another three digits. The number of lines in between two cartesian coordinates are 7841. And there are few hundreds of thousands of lines in a file.
What I need to do is copy the X Y Z coordinate (three digits) from file1.traj at line 7843 and paste into file2.traj at the same line number as in file1.traj. The next line will be 15685 from file1.traj and replace at line 15685 at file2.traj. And I dont want other lines (data) in file2.traj get altered. This sequence shall be going on until the end of the file. Means copy and substitude the selected lines from file1.traj into file2.traj.
I tried to use paste command but I cant do for specified line alone.
Here i showed the data format in the file. I used the line number for clarity purpose.
Code:
View 10 Replies
View Related
Feb 13, 2011
I want to access a file, and check the length of every line.After, i want to check and replace all lines with length over 10 characters, with a message.Does anyone have a clue on that?
View 1 Replies
View Related
May 30, 2011
I am trying to write a program in C which compares two files and prints the line that is equal.
Here file1.txt has
and file2.txt has
Note: file2.txt consist of only a single string where as file2.txt has multiple lines. Actually im comparing two files with md5sum values.
Here is the code but it compares only first line of files..but it should compare the whole file1..and sorry iam a beginner in C can any1 sujest some modification to this code so that..it can compare file2 with entire file1
Quote:
View 9 Replies
View Related
Jul 25, 2011
I want to insert a line at a particular line number using sed or awk. where line number is not fixed and is in form of variable.
I want to use variable in sed or awk command.I tried something like below, but no luck.
View 7 Replies
View Related
May 29, 2010
I've never programed shell scripting.
Code goes like so:
I simply want to read a file "data.txt" line by line Then char by char and add them into a result var. The file is supossed to always contain numeric values
View 8 Replies
View Related
Sep 27, 2010
My T1 connection is like this: T1 line -- cisco router -- regular router -- LAN. It works fine. Now I want to replace the regular router with an Ubuntu router, which has two nic card, eth0 to Internet and eth1 to LAN. I tested the Ubuntu router on a DSL connection and it worked perfectly. But when I connected the cable from the cisco router to eth0 in the Ubuntu router, eth0 was not up. It didn't show the ip address of eth0 as I tried "ifconfig". I assigned the static ip from the ISP to eth0, also made it acquire ip automatically. Neither worked. eth0 still got no ip address. Did I miss something?
View 9 Replies
View Related
Mar 27, 2010
I have a very strange wireless problem, i have ubuntu 9.10 installed on a dual boot with a belkin pci wireless card, i have used ndiswrapper to install the windows driver, plenty of wireless connections come up, i find my own and try to connect, it asks for the password (i have double checked and this is correct), and then goes to connect, now heres the weird bit, the connection light comes up on the card as though its on the network then after about 1 minute the light goes out and ubuntu tells me it is now off line.
[Code].....
View 1 Replies
View Related
Jul 17, 2010
I have two Roboards that need to communicate with one another. I have sucessfully installed Ubuntu 9.04 using the 386 kernel based on instructions found online.I can use the GUI to set up an Ad-Hoc network using one Roboard ("Create New Wireless Network"), call it Manet, and connect to "Manet" using the GUI on the other Roboard and ping/ssh between the boards. However, when I try to create the same wireless network using the command line using:
ifconfig wlan2 down
iwconfig wlan2 key off essid 'Manet' channel 5 ap any
ifconfig wlan2 up
I don't see any entry in iwconfig under "Cell". It keeps giving me "Not Associated"When I try to enter the same information on the other Roboard to try to connect to the network, it doesn't connect and under iwconfig, I don't even see any entry for ESSID. Could somebody please tell me why it works when I use the GUI and not the command line.
View 1 Replies
View Related
Sep 24, 2010
I have installed LUbuntu from a desktop cd-rom in my Toshiba Satellite Pro 4600. There is a Pentium III inside.
I have searched in the forum and found that it is a common problem, but the solutions explained either did not work in my computer or I did not understand them. Maybe together we can fix the problem.
I do not know how to connect to mi wi-fi conection. In the menu of the Network conections, I choose the label "wireless", then click to "add", give a name to the conection, write the ESSID, and the password (WPA) and click "Ok" to save. So my conection appears on the list o Wireless connections.
But now, what should I do? Nothing (as a wi-fi icon) appears on the bar (there is just the cabled connection icon, because I am conected with the ethernet cable). If I click on the cabled connection icon there is no wireless option available.
View 9 Replies
View Related
May 11, 2010
For reasons that are not terribly interesting I decided it would be a great idea to remove and re-install the xserver-xorg package. Which proved to be a much larger mistake than I imagined it would be. I purged the package, and then restarted.Naturally I need to have an internet connection to use apt-get to reinstall xserver-xorg, which is where my idea falls apart.I followed the directions in the How To: Manual Network Configuration. However, after I enter the command "sudo dhclient wlan1" I get the line "wmaster0: unknown hardware address type 801" twice prior to the output that the above link shows. Then I just get DHCPDISCOVER messages until I get a "No DHCPOFFERS received. No working leases in persistent database - sleeping."
I'm connecting with WEP to a router that I know works (because I'm using it to type this on my laptop right now) and I know that the wireless adapter(RTL8187) is installed properly because it automatically connected to my network when I had xserver-xorg still installed.I'm running ubuntu 9.04.I've searched for a few hours and I'm no closer to resolving the issue.
View 9 Replies
View Related
Jun 21, 2010
I have setup my wireless card via ndiswrapper and I can see that if I perform an iwconfig that the card is wlan0. I have attempted to connect with the router but I can't get any connection.I know the password is: ########## (10 digits long) but for the life of me I can't get it to work via command line.
View 2 Replies
View Related
Jun 26, 2010
I'm using a remote dedicated server running ubuntu server edition, and I have no idea what the upload/download speeds are.Is there a reliable method to test these speeds via the command line?
View 2 Replies
View Related
Aug 13, 2010
I'm trying to connect to a AP by command line but I can't yet. Using the network manager it's possible but I need the command lines to use in my code programming.
Here it's what I tryed:
Code:
sudo iwconfig wlan0 mode managed channel 6 key restricted s:'12345' essid 'cassiano-PC_AP'
and the tail: sudo tail -f /var/log/syslog
Code:
Aug 13 14:05:55 cassiano-linux kernel: [13476.935795] wlan0: direct probe to AP 00:15:af:84:29:d3 (try 1)
Aug 13 14:05:55 cassiano-linux kernel: [13476.935943] wlan0: deauthenticating from 00:15:af:84:29:d3 by local choice (reason=3)
[Code]...
View 2 Replies
View Related
Sep 1, 2010
I'm running a fresh install of Ubuntu 10.4.1 on a Dell Dimension 4700 desktop.When connected to the network (jack in wall, no router), I normally navigate my intranet and the internet.But here's the issue: this particular Dell machine has an IP addresses that is radically different from all other machines connected to the same network.I have tried to edit etc/network/interfaces to force a different IP, but then I lose connectivity. I need this to follow the IP scheme of my intranet so I can set up a server that resolves by hostname. Is there anything wrong with the NIC or is this something that can be resolved via command line?
View 9 Replies
View Related
Oct 22, 2010
i cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Quote:
Plugin rp-pppoe.so loaded.
RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
View 8 Replies
View Related
Dec 2, 2010
how to send a document to print on a network printer (via IP address) from the command line (not a GUI interface).
View 4 Replies
View Related
