Ubuntu Networking :: Can't Connect Command Line To A Wifi?
Aug 13, 2010
I'm trying to connect to a AP by command line but I can't yet. Using the network manager it's possible but I need the command lines to use in my code programming.
Here it's what I tryed:
Code:
sudo iwconfig wlan0 mode managed channel 6 key restricted s:'12345' essid 'cassiano-PC_AP'
and the tail: sudo tail -f /var/log/syslog
Code:
Aug 13 14:05:55 cassiano-linux kernel: [13476.935795] wlan0: direct probe to AP 00:15:af:84:29:d3 (try 1)
Aug 13 14:05:55 cassiano-linux kernel: [13476.935943] wlan0: deauthenticating from 00:15:af:84:29:d3 by local choice (reason=3)
i cant connect to adsl with pon dsl-provider or any command line. just network manager applet GUI works for me. i follow this guide [URL] and try about 3 hours but without success. i edit /etc/network/interfaces following this thread: [URL] but after any alteration in /etc/network/interfaces and restart network my adsl connections are not work at all and also i lost my GUI applet connections too. then i have to back /etc/network/interfaces to its original content and restart my computer to restore my connections
pon dsl-provider error is:
Quote:
Plugin rp-pppoe.so loaded. RP-PPPoE plugin version 3.8p compiled against pppd 2.4.5
I want to connect to the internet using the command line. I'm 95% I have my wireless card installed correctly, since I'm using it right now.dhclient takes a minute or two, then finishes. It gives no output, success or failure. Then I open up Firefox and I'm not connected to the internet. What can I do to figure out what the problem is?
I need to connect to my router using only CLI, specifying an username and password, preferably with a single command line, so it won't be interactive, 'cause I need to include the command in a script.
So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI
so far i have done this, but im not sure what to do after this
Nexus:~ # ifconfig wlan0 down Nexus:~ # ifconfig wlan0 up Nexus:~ # iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.
Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?
I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.
After this typingiwconfig wlan0 result is: wlan0 IEEE 802.11g ESSID:off/any Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:1 Mb/s
[Code]....
I installed ndiswrapper in order to use ipn2200 WinXp drivers.
I have a Sony TZ270N running Ubuntu 10.04 splendidly. The Sprint Mobile Broadband works great, but it's a bit cumbersome to activate. Specifically, to get it to work I need to:
Then I wait another five seconds, right-click on the networking icon, choose "Enable mobile broadband", then left-click on the networking icon, and choose "Connect to Sprint Connection". I do this multiple times a day, and it's just a bit of a pain, especially when in a hurry. Accordingly, I'd like to script it so I can do the whole thing with a single command.
I've already put the above echo statements into a script and it works great; is there any way to script the actual start of the PPP session itself -- with the caveat that I'd like the networking icon to accurately reflect the latest state?
(In other words, I don't want to bypass the networking icon and just launch the PPP session in the background -- I want it to show that I'm connected, and still let me manage the connection via the icon after connected.)
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
I had to uninstall a proprietary ATI driver because it wrecked my X server. Apparently I removed the wrong package, because now the X server won't even start, even with the "nomodeset" flag.
QUESTION 1.How can I configure WiFi on the command line with NetworkManager or ifup, whichever is easier?
QUESTION 2.Which packages do I need to download to restore the X server?
For some reason Ubuntu 8.04 doesn't save my college network settings, so I have to connect manually each time. This is what I physically have to do to connect:
1) Click on network manager icon in the notification area 2) Click "connect to other wireless network" 3) Type in "NETWORK_NAME" into network name area field 4) Select WPA enterprise under wireless security 5) Type in "USERNAME" into username field 6) Type in "PASSWORD" into password field
So what I would like to know: is there any command line equivalent for the above six steps? I would like to write a script which will carry out the above six steps for me automatically, using the parameters NETWORK_NAME, USERNAME and PASSWORD.
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
I hosed my installation of F14 by installing from some "experimental" repositories. Now I only get XDM at startup and an xterm on login. This would be fine if I could use yum to do some updates, but I have no network connection. I have been over the man page for nmcli dozens of times and none of the options there seems to start anything. I have also tried starting dhclient or using:
ifconfig eth0 up Nothing. So, is there a reliable way I can just connect to the network? This shouldn't be so hard.
I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.
Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
Having played around with ubuntu a fair bit I decided to breathe life into an old thinkpad with a pcmcia wireless card, by following the minimal install instructions and using lxde window manager etc.. Everything works fine apart from the fact that I cannot connect wirelessly. The card picks up and lists connections but whenever I have clicked on a connection the dail spins and then it gives up.I installed network-manager and managed to get nm-applet appearing in the sysTray otherwise I would not even have known there was wireless connections there.
I was thinking there maybe some conflict with another network manager, does this sound likely?
I'm having an issue recently with Ubuntu 10.04 x64. Connecting to my wifi is not working. I believe it is some kind of issue with the router. On Windows 7 the only way that I could connect to the net was by copying the network profile to a usb flashdrive from another computer and loading it mine. The wireless signal just keeps attempting to connect.
I have Ubuntu 10.04 on my EeePC 1000H. I don't use this computer often but it has always worked before... I suspect an update did this to me. I've recently swapped wireless routers but all my other machines have been able to connect to the new router. I can see the SSID and the signal strength is high but when I try to connect to it, it just attempts for a long time then asks me for my password again. I am currently connected to wired network.
I installed Ubuntu 11.04 yesterday and my wireless didn't work so I searched a little and found a way to make it work; Uninstalled bcmwl-kernel-source and installed firmware-b43-lpphy-installer and b43-fwcutter. And it worked. But today I accidentally pressed the "turn off wireless" button on my laptop. I obviously pressed it again and thought it would work but it doesn't. Now I find networks and stuff but I can't connect to them. It tries for awhile and then asks me to enter the password which I do (it is correct) and then it tries to connect for a few minutes again and then it asks me for the password again.
Some info:
Code: lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
I'm having a problem to connect to the network at home via wifi, open or protected. Using ubuntu 11.04, attached are more details. I've managed to get a successful connection on an open network at work.
i am tryin to connect to internet through wifi. for this i have to connect to router first and then open the web browser to put UN and PW. I am using ubuntu. i know UN and PW. I can connect to router but my(any) web browser cannot open the authentication page.
I just installed the XBMC from the XBMC live CD. I want to configure it in a way to auto-connect to internet. (my router is wpa-password protected.)
i know how to save the password and auto connect to internet from gnome GUI but not how to do it from command line. what should i install, change or configure in order to auto connect to internet? (using command line)
I am running 10.10 on a Toshiba NB255 netbook. Wireless works find for me at home and worked last week at a hotel. At home I just use WEP, and my office network uses WPA. I can connect just fine from my work laptop but not from this netbook. The network shows up fine in the network manager and it asks for the WPA password, but doesn't establish a connection. Every once in a while it will say it is connected and has full strength but I can't ping anything, and within a minute or so it drops again. IIRC yesterday it connected via wireless and actually worked for maybe a minute before dropping at it hasn't worked since. Like I said, this has worked on other wireless networks.
Here is some output from dmesg: Code: [55086.034476] wlan0: authenticate with 00:15:62:ff:6e:89 (try 1) [55086.037598] wlan0: authenticated [55086.037658] wlan0: associate with 00:15:62:ff:6e:89 (try 1) [55086.041880] wlan0: RX AssocResp from 00:15:62:ff:6e:89 (capab=0x431 status=0 aid=4) [55086.041891] wlan0: associated [55089.045810] wlan0: deauthenticated from 00:15:62:ff:6e:89 (Reason: 2) [55089.079974] cfg80211: All devices are disconnected, going to restore regulatory settings .....
So recently we switched Internet Providers. While we had Bellsouth, my laptop would connect to our wireless internet flawlessly everytime. However, we just switched to Charter because it was both cheaper and faster. But now, my laptop will not connect to our wireless. If I hook it up to an Ethernet cord, it connects just fine. I believe they gave us a new modem/router or whatever it is that sends out the wifi signal.
I have tried to connect with this laptop on Ubuntu, Linux Mint, and Backtrack 4. On Ubuntu and Linux Mint, after I enter the correct WEP key, it sits there and tried to connect for a minute or two, but then the window pops up asking for the WEP key again, even though it's still filled out.
When I tried connecting on Backtrack, it told me that it could not obtain an IP address.
