CentOS 5 Hardware :: Cannot Connect To Network Using TrendNet PCI Adapter
Apr 26, 2010
I felt the urge to build my own "Incredible PBX" system, and in the process downloaded pbxinaflash-i386-5.4.iso which is based on CentOS 5.4. The PC that I'm using is an old desktop, and the onboard ethernet adapter is not working, so I installed Trendnet PCI Adapter (te100-pciwn h/w : 2.2 R), which used to work greatly under Windows XP. Since my on-board ethernet adapater doesn't work, I disabled "eth0" device, and I modified eth1 device to load during boot. But, for whatever reasons, eth1 fails to get the IP address. I thought the driver that is part of CentOS 5.4 may not be working, so I thought of building the driver from the files provided in the CD (that came with TrendNet adapter box).. and unfortunately my attempts to build the driver have also failed.
Following files are attached in the zip file
- basedata.R3721 (info collected by ./getinfo.sh all )
- Directory 2.2.X has "te100.c, makefile, kern_compat.h copying.txt" (These files came with the Trendnet CD)
- errors (makefile errors when tried to build te100 driver)
From what I understand, TrendNet TE100-PCIWN is based on "Realtek Semiconductor Co., Ltd. RTL-8139" chipset. How to get my ethernet adapater (eth1) connected to internet.
View 8 Replies
ADVERTISEMENT
Jul 23, 2011
get a 3x3 450Mbps router and wireless adapter. It seems the Trendnet is the only one so far.
View 5 Replies
View Related
May 2, 2010
Installation of my wireless USB trendnet adapter
View 2 Replies
View Related
Apr 17, 2010
I downloaded ndiswrapper so that I can try to get my trendnet tew-444ub wireless adapter to work with my windows xp through ubuntu with a dual boot.
View 2 Replies
View Related
Jul 10, 2010
I can't install a PCI Wireless Adapter TRENDnet model TEW-623PI in my Hardy Heron 8.04 LTS.
View 1 Replies
View Related
Jan 7, 2010
I have a Belkin N150 USB Wireless Network Adapter and a Belkin N150 Wireless Router. I cannot seem to get NetworkManager to connect to the internet. I have blacklisted the 9.10 staging driver and associated rt files. I have downloaded and built the ralink 2.3.0.0 driver. The light flashes on the usb but I cannot connect to internet.
lsusb output:
jerry@jerry-desktop:~$ lsusb
Bus 002 Device 003: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard
Bus 002 Device 002: ID 046d:c50e Logitech, Inc. MX-1000 Cordless Mouse Receiver
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:09c2 Logitech, Inc.
Bus 001 Device 005: ID 050d:935b Belkin Components
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod output:
jerry@jerry-desktop:~$ sudo lsmod
Module Size Used by
rt2870sta 554908 1
iwconfig output:
jerry@jerry-desktop:~$ sudo iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"11n-AP" Nickname:"RT2870STA"
Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thrff Fragment thrff
Encryption keyff
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I am not sure what the ra0 is telling me but what about the Access Point: Not-Associated statement? Does that mean that the network adapter is not connecting to the router?
View 1 Replies
View Related
Aug 17, 2010
We need to fina a wireles adapter that works with Ubuntu.We have a netgear adapter but the OS doesn't recognize it when we plug it into the USB port and there isn't software to install so it will recognize it - only Windows documentation.My daughter loves this OS and wants to keep it but can't connect to our wireless network without an adapter.
View 7 Replies
View Related
Aug 31, 2010
I have an HP Pavilion dv5 1002nr laptop running Vista. I decided to install Ubuntu using the windows installer, which did install well, but I decided that it wasn't for me, and uninstalled it. Now, my wireless adapter which is a Atheros AR5007 802.11b/g can see the network, find networks by itself, and is supposedly installed correctly according to Vista, cannot connect to any networks at all despite being able to see them and acquire a signal strength. Up until installing Ubuntu I have never had an issue like this. Other devices have no trouble connecting to this network, and I am currently using a Netgear wireless usb dongle to connect to the very network that my Atheros can not connect to.
View 2 Replies
View Related
Feb 15, 2009
I want to run snort through a web application with exec("snort -v -i eth0 ") php function.for example when start button was pressed snort should be run,but the execution failed with this error:but when I run snort command via command line as root it will execute successfully.I think this problem is for that apache user haven't access to network adapter, is my guess correct? I have no experience with apache, should I change apache configuration? what is the configuration for this problem.I think I should find a way to allow apache to access but I don't know how?
View 2 Replies
View Related
Sep 8, 2010
I know that most people are using F12 and F13 but I just installed F10 on one of my machines. The Kernel is 2.6.27.5-117.fc10.i686 and the GUI is Gnome 2.24.1.I have a Trendnet wireless card already installed in the machine from when it ran XP which is in the tew-421pc/tew-423pi family. Is there a device manager/hardware installer that I can use to set up the wireless card or does anyone know of a driver install program for this card?
View 1 Replies
View Related
Jul 5, 2009
I am running 2.2.4 and CentOS 5.3 (RHEL 5.3 clone). I have two Ethernet cards: eth0 and eth1. Eth1 is connected to the Internet; eth0 is connected to all my virtual machines; iptables connects eth1 to eth0.
A new machine I am adding needs to be off eth0 and eth1 (security reasons). Question: is there a way to make up a third fake Ethernet card that I do not physically have (eth2) and assign it to my new VM? How do I do this? Can I get away with some thing like this?
$ pwd
/etc/sysconfig/network-scripts
$ cat ifcfg-eth0
DEVICE=eth2
BOOTPROTO=none
BROADCAST=192.168.255.255
[Code]...
View 5 Replies
View Related
Feb 28, 2011
Installed CentOS 5.5 on VMware ESXi server running vsphere 4.1. Installed fine and picked the E1000 network adapter. But can't get the adapter to become active and pick up an IP address. Has anyone done this before? I can't get it to work. When i was testing CentOS out i used VirtualBox and worked fine using bridged networking but just can't seem to get this network card working.I've put some pictures of the config i've got.http:[url]....
View 2 Replies
View Related
Jan 3, 2011
when i type iwlist wlan0 scan it gives a load of networks and mine but how do i connect to it?
View 16 Replies
View Related
Jun 7, 2011
I am attempting to connect a CentOS VMWare VM to a networked Brother HL5170DN printer. The printer is located at 192.168.0.101. It is available and I can connect to it with various Ubuntu and Windoze VMs.
I have searched for instructions on how to do this and it SEEMS rather simple. However, it does not work. Here is what I have done:
System; Administration; Printing to launch the printer configuration wizard
supply root password New Printer Provide printer name, description etc. Select Connection - LPD/LPR Host or Printer Hostname - 192.168.0.101 supply a printer name again select Brother HL5170DN BR-Scripts3 from the footmatic database complete creating the printer
The printer appears as a local printer, however, I cannot print a test page. Nothing happens when I click the button to print a test page. I can ping the printer by IP address. So I deleted the printer and tried again.
At the screen which asks for Hostname and Printername I entered the printer's IP address in Hostname as I had done before. I then clicked the Probe button. At this point Printer configuration freezes and I have to do a force quit.
I just tried the same thing on a physical CentOS 5.6 box - just in case the problem was a VMWare thing. Same symptoms. Probe freezes the Printer configuration program. I then recalled that the printer uses port 9100. I opened 9100 on the firewall (I think) but no improvement. I temporarily disabled the firewall and went throug the proces. I now have the printer defined at "socket://192.168.0.101:9100" and recognized as "Brother HL-5170DN BR-Script3"
I still cannot print a test page. I tried to print from gedit and it shows the printer with 1 job in the queue. The gedit print bumped that to 2 jobs in the "printing" state. Looks like I am communicating with the printer. Just not printing.
View 5 Replies
View Related
Jul 30, 2010
I am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
View 17 Replies
View Related
Sep 15, 2010
I successfully installed openvpn and networkmanager openvpn plugin. Then I successfully added a PPTP vpn connection by networkmanager vpn tab which name is "vpn1". But now I don't know how to connect to this PPTP vpn connection. I tried bellow command but no luck.
openvpn --config vpn1.config
View 3 Replies
View Related
May 2, 2014
WG111v2 USB that works just fine on my Ubuntu 12.04 Dell can't connect on my Debian Gigabyte. It finds the network name just fine, remembers its password, and tries to connect 3 times before giving up. This tower is 4 days old, as is the OS.
View 1 Replies
View Related
Jun 10, 2011
I recently moved out of state and don't have access to the net, however the neighbor of where I am staying is nice enough to let me leech off of her network till I get going. I know next to nothing about slackware and wireless networks since I have never had to mess with it. I have done my reading and have gotten this far.
1) wirelss card is installed and recognized, its a PCI b/g card that uses the ath5 module. The module is loaded and seems to be working.
2) I have heard wicd is easy so I installed it from /extra and it found my essid and accepted the wep password and it says connected at 45% and shows an IP.
however when I launch firefox or try to ping out nothing happens.
View 4 Replies
View Related
Aug 10, 2010
My laptop has an internal wifi adapter, but I recently purchased another one because of its extended range.susb, shows that the new adapter is:
Code:
Bus 002 Device 027: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
After disconnecting my internal adapter from the wireless network, I can scan for networks
[code]...
View 13 Replies
View Related
Apr 19, 2010
I have Ubuntu 9.10, which I just now installed on my Dell Dimension 3000. The computer has all of its USB ports working perfectly; tested in Windows. I plugged in my SMC USB Ez Connect g wireless adapter, and it isn't even recognized by the system. I used lsusb, and nothing except the USB keyboard and mouse shows up. Every time I boot or shut down, I get tons of errors saying that it's "unable to enumerate USB device on Port...," then the port number of whichever port I plug the wireless adapter into. I've tried using ndiswrapper, and have completely installed the Windows drivers using that (which were the same ones that worked perfectly in Windows XP Pro). I've tried looking into compat-wireless and Linux Wireless, and have successfully installed the zd1211rw drivers and everything. The drivers install completely and work, there is just no hardware present, or so it says. This is what the terminal says when I type dmesg, and also part of what shows up on booting and shutdown:
[code]....
I hope I've given enough information. Oh, and I downloaded Ubuntu a few days ago from their website, burned to a CD-R, installed, and downloaded all updates that it asked me to. Other than that and the ndiswrapper and driver installation, I've done nothing on the system.
View 1 Replies
View Related
Oct 23, 2010
I've just upgraded my old laptop from xubuntu to ubuntu 10.10 and I have some connectivity problems with my usb adapter Netgear WG111v3. On xubuntu I had no problems with connecting on the network but with ubuntu, it says I have good reception but it doesn't connect on the network (rarely it does, but for a very short time). I have another laptop currently running on ubuntu 10.04 and it has no problems at all (however it has an internal usb card).
View 1 Replies
View Related
Feb 9, 2011
I'm having some trouble getting my Zyxel NWD271N usb wireless adapter to connect.I'm using Ubuntu Desktop 64bit 10.10 What happens is that i'm always asked to enter the wpa key, and i've double and tripple checked that it's entered correctly. The wierd thing is that it has connected once or twice, but lost connection quickly, but i saw that i got an ip. I'm not sure about the maximum range on the adapter but i would estimate the distance to be no more than 4-5 meters from the wireless point. Also the signal indicator on the list of wireless networks shows strong, if not full. when i run lsusb i get:
Code:
Bus 001 Device 007: ID 0586:3417 ZyXEL Communications Corp. NWD271N 802.11n Wireless Adapter [Atheros AR9001U-(2)NG] when i run lsmod |grep ar9170 (saw the command on a german forum so i didn't understand what was talked about, but i got that it was about the same adapter) i get:
Code:
ar9170usb 54294 0
mac80211 267163 1 ar9170usb
ath 10413 1 ar9170usb
[code]....
View 5 Replies
View Related
Sep 22, 2010
I am using the Belkin wireless g usb adapter f5d7050 v1000 or at least that is what ubuntu says when I lsusb.
Code:
ceegee@Valar1:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 019: ID 050d:7050 Belkin Components F5D7050 ver 1000 WiFi
[code]....
View 2 Replies
View Related
Dec 22, 2010
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies
View Related
Aug 5, 2011
I use Ubuntu 10.04 and I can't connect internet using dell wireless 1450 USB adapter.
View 9 Replies
View Related
Aug 6, 2011
I currently have a Nexxt Lynx 150 Wireless USB adapter attatched to one of my home destops to recieve my wifi signal, however, i have run into a speed bump in terms of getting it connected to my ubuntu 11.04. This adapter works perfectly in windows and on the ubuntu live cd, but, when i install ubuntu to my hard drive and try to connect to my network,
it just takes a very long time, then says, disconnected. My signal is WPA2-Personal protected. Here is a link to the adapter's home page > [URL] It seems to me that this is a driver problem. The cd that my adapter came with has drivers for linux on it, but i havent the slightest clue how to use them.
View 9 Replies
View Related
Feb 11, 2010
I recently tried to install Crunchbang on my IBM Thinkpad T20 laptop. Everything went OK as far as I can tell (I still have to adjust acpi and display settings), but I cannot get my laptop to connect to the internet via wireless (wired connection works fine). I've done a good deal of searching online, and I realize that my wireless adapter (wpc54gs, bcm4318 chipset) is problematic in linux, and that b43-fwcutter is typically required. I did install b43-fwcutter, and it seemed to install OK, but nothing subsequently happened when I opened networkmanager. I'm not sure at this point if my problem is that I don't know how to configure any wireless adapter in crunchbang, or if it is that my particular adapter is not being recognized.
View 4 Replies
View Related
Apr 7, 2011
we need to connect 80pin SCA Ultra320 SCSI hdd to 68pin on host adapter. The adapter we got is Assmann ABSCA-2. Hard drive is 'Fujitsu MAW3073NC'
we have two 68pin cables, one with and one without the terminator on end. which one to use?
it is essential the drive doesn't get damaged.
View 14 Replies
View Related
Sep 14, 2009
A node on a cluster that our lab has had sitting in a dusty room since time forgotten does not seem to want to talk to the rest of the world any more.Following is the information I found was being asked for on other posts for similar questions, transcribed by hand.
View 6 Replies
View Related
Feb 10, 2010
I purchased the TEW-423/C1.1R based on posts which indicated it works with Ubuntu (or at least linux) out of the box. I wanted a card that was supported with native drivers - no messing with ndiswrapper and such. The Trendnet TEW-423 is posted as working out of the box with the Realtek chip RTL8185. My unit has the chip (RT8185). The posting is at [URL]...
With the card inserted, Ubu 9.04 and 9.10 freeze at boot time. 9.10 freezes when the logo appears, 9.04 freezes at the arrow which comes after the logo. Remove the card and full boot is enabled. Obviously this card is not working out of the box.
View 6 Replies
View Related
