Networking :: Cannot Get Wireless Networking Working - Cannot Be Displayed In Firefox
Mar 16, 2010
Previously I have had Linux installed on my laptop (OpenSUSE, Ubuntu) with no problems as far as wireless networking in concerned. Due to wanting to play a certain game (which I have since grown tired of), I reinstalled Windows 7 Ultimate 64-bit. Recently I have booted up to live DVDs of PC-BSD, Ubuntu, Kubuntu, and OpenSUSE 11.2 and I cannot get wireless networking working.
At home I use WPA2 Personal. I put in the passphrase into NetworkManager (the same as I do for Windows), and the computer gets an IP address from the router (I use 10.3.5.x at home). The problem is, I cannot connect to the Internets. If I do "ping -c 3 cnet.com" it gives me the proper response of 216.239.113.101, but if I try to go to cnet.com, I get a page cannot be displayed in Firefox.
I get this error for every website. I don't understand it seeing that I can ping the websites, but even if I put the IP address in the URL, it still doesn't load the page. What am I doing wrong? Everything is dynamic, as in Win7. But everything works perfectly in Windows, but no such luck in Linux. I know it must be something simple, but I'm at a loss. Seeing that I no longer play Star Trek Online, I'd like to put Linux or BSD back on my laptop, but no Internet is not an option.
A couple of weeks ago my laptop's wifi started acting up, to the point that it didn't function. When I click the nwManager icon to being up a list of available networks, it is empty. If I try to create a new network, with the credentials of my modem, it appears to work, and asks for the password. After I enter the password, it seems to work for about 30 seconds (much longer than normal) but then it prompts me again for the password. This cycle continues indefinitely.
I'm running Karmic on a Dell i1525. how to find out what wireless card I have.
Initially when I upgraded to Lucid I uninstalled openJDK and switched back to sun-java5 packages due to some application support limitations. Now I have to upgrade to sun-java6- packages. I removed the sun-java5 packages and installed the sun-java6 packages. Including the sun-java6-plugin.
I can see the plugin in aboutlugins in Firefox 3.6.10 however nothing (like webex or applets) related to java works. As a workaround I have used the Icedtea plugin which comes with open JDK and that seems to work. However I want to get the sun-java6-plugin working.
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password: lo Interface doesn't support scanning. eth0 Interface doesn't support scanning.
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions. eth0 no wireless extensions. and lspci: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Using Ubuntu 9.10 and Firefox 3.6.4 .When I go to any site ,the site dims and freezes. When I try to close, invariably I get: site ... " is not responding. Forcing it to quit will cause you to lose any unsaved changes."I already tried to delete and reinstall Firefox 3.6.4 (both through the Synaptic Package Manager and through the Terminal)but to no avail.
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
I just loaded Ubuntu 11.04 onto Acer Aspire 5100 computer. I can access the internet through Firefox when I connect ethernet lan cable but it doesn't work when I use wireless connection. Although I do get the indicator in top right that says my wireless connection was established. Why I can't access internet with Firefox in wireless mode? I tried toggling the wireless switch in front of Acer but that didn't work.
I have installed the latest released version of openSUSE, 10.3 or so, and I am having an issue getting the internet to work. The system tells me that I am connected to my wireless network, but firefox does not browse, indicating that it cannot find the network. I'm totally stumped because if my wireless network is connected, why can't I browse?
i just installed Gosalia mad monkey on an old dell d520 latitude but cant get wireless working? i found how to set up my wireless connection butits asking for the default keyring password to unlock?i never set a password for this as it never askedi found this but i still dont understandit states" Typed in all the details, clicked Add and... �Enter password for default keyring to unlock�. Huh? I didn't set that... Tried the root password, tried the user password, none worked. The answer: Gosalia's team remastered Ubuntu with their password locking the keyring. Quite a funny situation. "
Ubuntu and after installing it i can't browse any internet through firefox although ping is working good and downloading plugins to system to run MP3 or videos is also working fine but can't open any website through firefox and i tried the live cd of Ubuntu 10.4 at other PC and internet was working fine and firefox was working fine
I'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
Have tried both Mythdora 10.21 32bit and 64bit (Fedora 10)o get my wireless to work.Have looked at output from various suggested commands and logs and nothing jumps out. Would appreciate any suggestions. Have attached log with all commands identified and output. Wired ethernet works with no problem.
The router shows no connection activity on the wireless portion from the Linux box. I do have a laptop that I have connected to the router before and after attempting to connect with the Linux system.The only out of the ordinary message I see is (from dmesg):wlan0: privacy configuration mismatch and mixed-cell disabled - disassociate
----------------- uname -a command ------------------------------- [mythtv@EcsA780GM ~]$ uname -a Linux EcsA780GM 2.6.27.12-170.2.5.fc10.x86_64 #1 SMP Wed Jan 21 01:33:24 EST 2009 x86_64
Does anybody know how to make the wireless card working on Fedora 9? I have followed the instruction from [URL] and have B43 driver installed with reset after. The driver install went fine, but where can I enable the wireless on desktop?
In the wake of a spate of posts complaining that wireless is not working in 10.04 here is mine. I'm on a (relatively old) AMD Duron 1.5Ghz, 1.5G memory with a VIA KM-266 motherboard. Wireless worked fine in 9.10. With a fresh install of the new 10.04, the usb wireless adapter is not detected, the tab to add a new wireless connection is grayed out, starting the KNetworkManager (did I got the name right?) does nothing (that is, no application starts), etc.note: if you are wondering how I am accessing the internet, I just fired up the 9.10 live CD, which as you can imagine is not the most practical thing in the world.Here is the info. The commands lsusb and lspci spit the following:
Code: grodrigues@grodrigues-desktop:~$ lsusb Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I just upgraded to Ubuntu 10.4.2. The wireless worked perfectly in 9.04, but did not not work at all in 9.10, and now 10.4.2. I'm running a Planex USB wireless dongle on an ancient ShuttleXPC SN41G (circa 2003) - the wireless dongle is an XLink Kai GW-USMini2N. I'm connected right now on the Shuttle via Ethernet cable, but would really like to get the wireless up and running again. Here's all the info I could get as per the pinned topic instructions:
I have installed 10.10 a few weeks ago and was able to have a wired internet connection without problems. However I haven' been able to get my wireless to work. Here are the commands I tried which might give a clue to what's wrong to someone helpful... From reading other post, I think the gateway is missing but I am not able to set it up properly...
Code: lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
I installed ubuntu 10.04 in my laptop hp 620 and wired connection is working but wireless is not working at all. I checked the old posts and when I enter the command "iwconfig" it shows the following:
lo no wireless extensions. eth0 no wireless extensions. wlan0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode: Auto Frequency=2.412 GHz Access Point: Not-Associated Bit Rate:1 Mb/s RTS thrff Fragment thrff Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I read in the older posts that the "Access Point: Not-Associated" should be "Access Point: Invalid" and the command that is used for this purpose is " sudo iwconfig wlan0 ap auto" and it did work-but for sometime, and again it showed me "not associated" when I restarted.
I just recently installed Slackware 64-bit on this machine and am still fairly new. So far I've already got my graphics card working (Mobility HD 5870 Crossfirex) but still can't seem to find any drivers for the wireless card here. It was a joke to trying to get linux help with dell. Its a half mini-card (DW1520)
There is a realtek rtl8187 on my board, and windows can browse and connect to wireless networks. I installed F11 and it was capable of browse and connect to my wireless network - even if it was really slower than windows. Anyway I did some yum update+reboots and now NetworkManager don't list any wireless network, and the checkbox "Enabled wireless" in the right click menu disappeared (I can see "Enable networking" only now). What can I do?
I am having problem with wireless networking my fedora 12 since i opened network manager yesterday. But to my notice i haven't done any changes. But still i am not able find any reason for the wireless network not to work. When i try to restart the network servies it gives the following msg.
Quote:
Bringing up interface eth0:
This version of ISC DHCP is based on the release available on ftp.isc.org. Features have been added and other changes have been made to the base software release in order to make it work better with this distribution.
Please report for this software via the Red Hat Bugzilla site: [url]
Did i do something wrong with the network manager or did something go wrong with fedora.
I've bought an RALINK getnet Wireless USB adapter and am trying to get it to work on a dual boot pc running XP and 9.10. According to the forums and the manufacturers website (www.getnet.com.tw), this should be supported in Linux.
Using the disk that came with it, I have gotten it to work in Windows. I've spent nearly a day scouring the Ubuntu forums and trying different things, but still haven't got it working in 9.10. (I think that most of my confusion is that many of the threads are for earlier versions)
If I type "iwconfig", I get this:
Code: graeme@graeme-desktop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions.
[Code].....
I have the CD that has a LINUX directory, but am not sure what to do with it. Through other threads I have determined that my drivers are rt2870.sys and .inf and have downloaded these. I'm not really sure what to do with them next..... Many threads talk about going System>Administration>Networking, but I don't have this as an option. I have however got an option which I downloaded called "Windows Wireless Drivers" which seemed to let me load the rt2870.inf driver, but then says "No" after it (not very helpful).
I have enabled Wireless Networking, and added my SSID etc etc, but I still don't connect.
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal: sudo apt-get upgrade Once that finished, restart your computer. Again open up terminal and type: sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
