Any recommendations as to what card to use? Have Netgear WPN311 and can't find a driver that works. Reading recent posts, sounds like 10.04 is a wireless wasteland.
View 2 Replies
I'm thinking of adding a wireless antenna to my desktop since I want to get rid of the cable going outside my window into the other room. I know some cards have trouble with their drivers or performance in Ubuntu so I was wondering if there's a way of finding the best brand and model to get so I know I won't have any problems with it on my Ubuntu installation. A webpage, a place where people post their cards and how good they perform or something like that which can help me get the easiest one to work with. The card would be installed via PCI and the room with the router is pretty much in front of this one.
View 4 Replies View Relatedi am going to buy a netgear wpn311 internal wireless networking card for my desktop i believe it has an atheros chipset.
can i install the wireless card in my desktop's pcie x16 slot?
I have been trying to find a wireless card that will readily work with Ubuntu 10.04 Desktop. Preferably an +802.11 N with an indoor range of between 300 to 400 ft. with possibly two antennas. Am finding many that say linux on the box but find that it ain't so. Also most times with no instructions or very convoluted process that results in errors.
View 1 Replies View RelatedI'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Here ASUSTeK Computer Inc. - Networks - ASUS PCE-N13
you may download the driver and install it yourself; once you've succeeded, I am a one-time Linux convert and quitter that gave up on Linux a long time ago, because frankly it is too complicated and I'm just a user who needs to get things done today, not in the few weeks time it takes to figure these things out. Since Debian Squeeze got released I wanna test it out, but my PCI card, ASUS PCE-N13 needs to be set up.
Driver install too technically advanced.
The accompanying instructions are far from self-evident:
================================================== =====================
Build Instructions:
====================
1> $tar -xvzf RT2860_Linux_STA_x.x.x.x.tgz
[Code].....
Unfortunately, due to the layout of my new apartment I'm going to have to run my desktop PC with a wireless card instead of a wired connection.
Googling turns up a lot of out-of-date information on hardware compatibility for Linux and PC wireless cards. Could anyone provide a suggestion or two for known-good, 2.6-kernel compatible PC wireless cards?
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies View RelatedI have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
have a dell Inspiron 1501 with ubuntu 10.0.4 I want to rename my wireless card from eth1 to wlan0 as I use conkyrc and it will not read my wireless strength or my ssid cuz it thinks it's a ethernet card and not wireless card. I know this for a fact because peppermint os my wireless card was wlan0 and it worked just fine.
View 1 Replies View RelatedHow do I install the correct driver for my Ubuntu 10.10 system for the AR9285 wireless card? code...
View 2 Replies View RelatedHow, using the command line can I detect my wireless card and make it work under SUSE Enterprise Desktop? The wireless card works in Win XP.
View 8 Replies View RelatedI just upgraded to natty last night, and everything is working fine except for the network manager. I can enable and configure the wireless card via bash, but the network manager widget will not manage the wireless card.
When I first boot up, the "Enable wireless" check box is greyed out. After I enable the card via the terminal, the "Enable wireless" check box becomes ungreyed, but every time I click it, it instantly unchecks itself. I feel like Currly from the Three Stoogies. Check, uncheck, Check, uncheck.. "Slaps face repeatedly."
Im looking for a pci wifi card for my media pc, I would prefer wired, but we are moving soon , so i dont want to take the time to run a wire through the house. Im looking for one that will work out of the box with Ubuntu.
View 1 Replies View RelatedI want to buy a wifi card that will, hopefully, be rock stable under my kubuntu 10.04 64 bit. Currently I have TP-Link Atheros card and stability in Linux is horrible. Please DO NOT give me links to compatibility list. Just suggest a network card that is most likely to be stable with least manual tuning effort required.
View 2 Replies View RelatedThinking of getting a wireless pci card for a desktop and I have seen a lot of people have issues with specific wireless cards. Is there a particular card or chipset that will be relatively painless to use?
I have seen this question asked before, but have not seen any replies.
Bought a couple new cards to do some bitcoin mining (just an experiment) and before I hook them up I want to know how to use p2pool. im not that good with ports and was wondering how to correctly configure it. I keep getting Bitcoin is downloading blocks errors.
Edit: Im also getting a low mhash rate of 1.5. Is this correct for a geforce 9400m? Im not too worried about it after I use these new cards. and is there a difference in using laptops vs a pci slot desktop video card?
Moving this to new topic, since it's no longer under wireless connectivity issues. [Noob Warning] I was having trouble getting Ubuntu to recognize my wireless card, as I have changed from the 3965 that came in my computer to the 4965, which added increased range and G band. Anyway, I read one of the threads on here, and this was the advice given:
Quote:
Originally Posted by pytheas22 First, download this file and save it to your desktop. Then run these commands:
Code:
sudo apt-get install build-essential
wget http://intellinuxwireless.org/iwlwifi/downloads/iwlwifi-5000-ucode-5.4.A.11.tar.gz
tar -xzvf iwlwifi*
sudo cp iwlwifi-5000-ucode-5.4.A.11/iwlwifi-5000-1.ucode /lib/firmware
bunzip2 compat-wireless-old
[Code]...
Just like the title said it won't detect my wireless card. Anybody know what's wrong with it?
View 9 Replies View RelatedI have been messing around with ubuntu for a few hours now trying to get my wireless driver to work, but I am having no luck. It seems like I installed the driver right, and network-admin use to show the wireless, but I couldn't unlock it to mess with properties. Now it doesn't even show wireless, and I still can't unlock it, so I'm unable to get my wireless card to work.
View 9 Replies View RelatedI have a MSI CX600 notebook with a :Ralink 802.11bgn 1T1R Mini Card Wireless Adapter (this name appears in WIndows 7)Can anybody tell me how to install it on Ubuntu 9.10,because I don't have internet connection.
View 3 Replies View RelatedI just installed and Ubuntu doesn't recognize my wireless card HP dv2945se. I can get a wired connection. I can't figure out what kind of card I have (did the terminal command line, have no idea how to read it) or how to install a driver for this OS (HP's site just lists drivers for Windows). How to get the wireless card recognized?
View 9 Replies View RelatedI'm totally sick of my WiFi Card, a Realtek 8187 connected by miniPCIe, althought internally designed as USB, I've tried all there is, and I've decided to change it. Which brand do you guys recommend? In my experience, I want to avoid Realtek and Atheros, but which brand offer the best "out-of-the-box" experience, and less overall issues? Intel, Broadcomm, maybe another Atheros or Realtek model, or whatever you guys think it's the best choice
View 2 Replies View RelatedBroadcom sta driver is installed and listed in Hardware Drivers but will no activate.It did activate and run perfectly when booting from USB FLASH DRIVE running UNR on HP MINI it has a external networkcard power off switch on the front of it if that matters.
View 7 Replies View RelatedI have just upgraded from 9.10 to 10.04 and now my wireless card isn't being detected as far as I know. It was working perfectly in the previous version. At the moment I've physically put an ethernet cable straight to the router.
[code]...
I've installed 10.04 on a Dell 1200 laptop and cannot get the wireless card working. I've tried getting Ndiswrapper but it doesn't appear to be available on 10.04, and since I don't have an Internet connection, I can't download it. The card is a Broadcom Corp BCM4306 802.11 b/g. How do I get the card connecting to my Linsksys?
View 7 Replies View Related
