As a frequent traveler, I spend most of my time in Hotel these months.My laptop is Ubuntu Maverick.Is there any UI tools for wifi scanning and auto-connection in Ubuntu?I have tried wifiradar. Although it could scan out the wifi SSID, while, the wifiradar could not connect to the WIFI.
View 4 RepliesI have an hp compaq 6720s laptop dualboot vista/ubuntu lucyd.My wireless card is Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02), controlled by wicd 1.7.0 (gnome network manager connects/disconects the net continuously).The problem is, any time I do a scanning with wicd or from command line to see the wifi nets around,my wireless is disconnected, then it connects again because is set to automatic reconnection
View 2 Replies View RelatedAfter I put my laptop in suspend mode and I resume it, it doesn't immediately detect the wifi networks. I have to wait for 5-10 minutes to see the various networks appearing.Is there a command I could run from the terminal to scan the wifi networks? I have tried the wcid application but I got some kind of conflict and then I removed i
View 5 Replies View RelatedI've just bought a GEETEK Hercules USB Wlan adapter, which has the Ralink rt3072 chipset. The Connection manager can find wireless APs, but it won't connect to any of those. Also, aircrack-ng does not find any APs while scanning.After some tinkering and a lot of restarting, I can now connect t wireless networks, although slowly. However, I still can't use it with aircrack-ng.
View 6 Replies View RelatedI'm running 10.04 LTS Desktop and I'm wondering if there any default packages that are automatically scanning for hosts? I'm on a university network and they're really touchy about any computers scanning ports/hosts and they keep disabling my computer. I'm just wondering if there's anything like that installed by default - maybe some of the zeroconf stuff?
View 2 Replies View RelatedI have made an EPSON RX500 multifunction device (printer/scanner) available over my router with the lpd protocol. Both PCs (ubuntu 10.04 laptop wireless, 8.10 desktop wired) connected to it can print, but not scan, since XSANE does not recognize the scanner over the network. It does hoverer both, scanning and printing, if connected with an USB cable. How can i configure xsane to recognize my RX500 over the network?
View 1 Replies View RelatedI actually have two problems: I couldn't get DUN to work with Ubuntu for a while and then one day it just magically worked and would let me find the device and connect to it. And then it broke again. So in my effort to fix the problem it looks like Bluetooth went completely off the rails. When I try to add a Bluetooth device through the manager it just keeps spinning with "Searching for Devices" but the spinning finds nothing (it would run for an eternity if I let it, it seems). hcitool scan reports "Scanning ..." and then drops back to command prompt. hciconfig notes the device is up. The device has no soft/hard locks on it. If anyone has a CLUE about what it could be.
Obvious note: My phone is in bluetooth mode and discoverable so that isn't the problem.
If I make the computer visible, my phone DOES NOT pick up it's there. Also, bluetooth works fine on the Fedora USB stick.
Is possible to detect port scanning just by using utilities included in linux (netstat, iptables...), Yes there is utility called psad but I would write some scripts for my own and learn something new
I am not a C++ geeg, so first thing that comes to my mind is that i will use simple BASH SCRIPT that will interact with iptables and monitor user activity, network activity etc. (but I thing that would not be good solution due to performance and capabilities, and also I am not familliar with memory in linux at all). I was reading aboud SNORT HIDS, NIDS... AFAIK some information can be obtainet from /proc but I have no idea which values should be monitored.
c source code for scanning a shared directory of a host ?
View 3 Replies View RelatedWhen writing a script using command-line tools why is it more difficult using graphical tools?
View 3 Replies View RelatedThe adapter I purchased (Zonet ZEW2508 ) uses the Ralink 2070 chipset - a fact that originally excited me because Ralink seems to be fairly loving to the Linux community. However, despite my best efforts I can't get the thing to work. Initially I tried following directions to set up the driver you can download from the Ralink website. The directions I found were written February first, and Ralink updated the driver February eighth - so as far as I can tell the directions no longer work. After screwing around trying to figure that out for a while I decided to give ndiswrapper a go.
Initially this seemed promising. I just harvested the drivers from the CD and followed one of the many ndiswrapper directions available - most helpful seemed initially to be the Ndiswrapper Troubleshooting Guide found in this forum, however the solutions offered there didn't work either. When I throw an ndiswrapper -l into the terminal it looks promising at first, it tells me the driver is installed and the device is present, but it just doesn't work. When I try iwconfig, or iwlist scan it tells me "no wireless extensions," and "interface doesn't support scanning" respectively. The only devices even listed are lo, eth0, and pan0. There's no wlan0 or anything of the sort.
I need to install the scripts of angstrom distribution
ie ARM gcc..................how to install the scrpits from the site [url]
My laptop has an internal wireless device and a button to turn it on/off, but since it has bad reception I use an external USB wireless adapter.The problem is that if I turn the internal wireless device off using the button, it also turns the USB wireless adapter off.Is there anyway to use the killswitch (the button) only for the internal wireless device?This only started to happen in Ubuntu 10.04.
View 7 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies View Relatedget WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
I'm trying to setup a Centos 5.6 Squid Proxy Server with Content Filtering & Antivirus Scanning Incoming HTTP Traffic from the Internet
I then proceeded to setup an configure the Proxy Server, i was able to test and confirm that Squid and Dansguardian Content Filter is working, however i dont know if Clamav is scanning HTTP traffic before it hits the client/server. Is there a way i can check if the Antivirus scanning is working.. is there some log file or real world test i can i can do to confirm that Clamav is scanning incoming traffic or even blocking potential viruses ??
Anyone who has squid proxy server with Clamav configured and its working can share there settings/setup with me and how they tested it ??
I have a pc which has 2 network cards, 1 wifi and 1 ethernet card.
I'm using wifi card to connect to wifi network (internet) and i'm planing to share this wifi/internet connection via ethernet to wireless router (siemens sx763) so i can have internet on my other devices, e.g. mobile phone, laptop.
I checked xen-tools on a Debian Lenny system
Got following
Code:
This package contains tools to manage Debian based XEN virtual servers.
Using the scripts you can easily create fully configured Xen guest domains (domU) which can be listed, updated, or copied easily.
Homepage: [url] in the above output I am getting a line Conffiles and then you can see a series of /etc what are that and is it an error or some conflict?
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have 2 connections, wlan and wired, and I'd want to have a few websites (in my browser) to connect through the wireless connection while other go through the wired rj45 connection. s it possible? (without unplugging the rj45 cable...)
View 2 Replies View Relatedthe only error message I can find comes from "dmesg|tail"all it shows is
"no IPv6 router"any body know what is going on here or where where to look for more clues the next time I get around public wifi Oh the windoze washers and apple polishers don't seem to have any problems at all
I have an old PowerBook G4 that I would like to use as a 'dummy' computer for learning wireless penetration (WEP/WPA attacks) more effectively. I had been using a wireless router, but I gave it away I can use Mac OS X to share an ethernet connection over wifi, but this is _very_ un-configurable. You get two options only, WEP and a key-length. So, I would like to install someway to make this wireless connection more configurable.
View 2 Replies View Relatedshare the implemented "c" program for scanning the available wireless network.
View 2 Replies View RelatedI did this --> [url]
My computer says the driver is installed and the device is present. All of that went fine. Now I need to connect my card to my house's wireless network. Am I supposed to do that in System-->Administration-->Network Tools? The problem is that whenever I click on network tools, the application looks like it is going to start-up and then quits/crashes/runs away, whatever. Any ideas on what is causing this?
Okay, I tried launching from the terminal, here is what I got:
Code:
I want to run OpenBox on a netbook. For those of you not familiar, it is a very simple window manager, where I can launch a terminal with a mouse click, and I can start the few apps that I need from the command line. Basically, I am trading eye candy and easy access to a lot of stuff I don't need for a more responsive GUI.
My question is...what package should I install, and what corresponding command line would be used to launch a tool to manage the wireless LAN connection?
dear can someone highly gui or text base/command line tool that use as "isp bandwidth monitoring tools in linux".i do have leased line,frame relay, wireless linke,dsl too. i want to monitor what is uploading and downloading.
View 11 Replies View RelatedBeen helping a user who recently upgraded to 11.04 as his networking stopped after the upgrade. One thing I noticed was that he could not get ping to work.Then checked my 11.04 machine and it also fails to ping using Network Tools. I know the network is OK as I am using my Ubuntu machine to write this. Ping from the command line is fine so it is only the Network Tools ping test that appears to be broken.
Asked another Ubuntu 11 user to check his machine and he also cannot get ping to work even though his machine appears to be fine. Again this is only using the GUI tool.I know it is not hardware as I can dual boot and in XP everything is fine and I can ping all my systems. Also I am sharing a folder from my Ubuntu and my Mac shares the folder just fine. The Mac can also ping everything except the Ubuntu box. Command line ping works so it is not a basic network problem.So as far as I can tell the Network Tools ping test is not working. Has anyone else seen this or can confirm that it is broke. How do I report this or get it fixed?
I'm running Ubuntu 11.04 and I've been unable to access any type of Internet service besides web browsing. When I check on Network Tools, it's always set on Loopback Interface, regardless of whether I've just switched it to Ethernet Interface. I haven't been able to download system updates through Update Manager. I'm not very experienced with Ubuntu.
View 9 Replies View Related