Ubuntu Networking :: Trouble Mounting NAS On Startup
Aug 22, 2010
I am having difficulties to mount my NAS (zyxel nsa210) on startup. After some online research, i stumbled upon the "solution".I was advised to write an entry into the fstab-file and that's what i did.And this actually worked like a charm and i was then able to find NAS in "Places". (Not on my desktop since i disabled it). BUT this works not after booting up...meaning there is nothing like NAS in "Places" and i have to mount it manually by using the "sudo mount -a"-command...there is nothing automatic about this solution...So now my question for everyone capable of answering me: "Where did i go wrong? i have installed smbfs and the folder where the NAS should be mounted in actually exists, so the usual suspects should be ruled out i guess
Recently i share the file with nfs share in fedora 10 , but my problem is that is unable to mount it from fedora 11 . i didnt get any error while starting the nfs service in f10 .but still i cant mount it from f11 machine.
I want to mount a remote drive on bootup. I'm using FC14 and remote machine is FreeBSD. I've written a shell script to mount it. The script contains only one line: Code: mount 192.168.1.33:/home/user7 /media/mc33
I've to run this script from superuser mode to mount the file system(it works). So to mount it at bootup, I added the shell script to my PATH (/home/me/bin) and added it to Menu->System->Preferences->Startup Applications. Well this doesn't work because the root privileges are not present. I tried fixing it by giving root privileges to my shell script Code: #chmod +s mount-mc33 but it made no difference.
My 10.04 is mounting my USB drive at startup. This is fine except sometimes it mounts to drivename_ rather than to drivename. How do I make it always mount to drivename.
how to make my other partition mount at Ubuntu startup? I have a shortcut to my windows XP documents folder, but the shortcut is broken every time I restart because the other partition has not been mounted. I assume there is a terminal command I need to type into my start-up manager?
yesterday I did an upgrade from 9.10 to 10.04 and this time it was a mixed experience, most thing worked, but some things like gdm, sound and other setting need(ed) corrections to work again (as in 9.10).In 9.10 I setup my system so that the second partition (data) was only manually mounted after asking for my password.
After updating 10.04 I asking me at every bootup whether I want to manually mount or skip the mounting. And when I manually mount the partition I don't need any password anymore.Why did the upgrade change my setting?Not being an linux-expert, having not documented how I have done the previous setup and being unlucky with google, I could use some pointers in the right direction.Even if I sound not so happy at the moment I really appreciate the good work that went into ubuntu. After setting up my system after each new installation or upgrade I enjoyed a carefree time with ubuntu (where I forget everything I need to setup my system because it just works as it should).
I have just installed ubuntu 10.10 on my win7 laptop (Acer Timeline 3810T) with wubi. I can mount the laptop's windows partition with no issues using NTFS Config (after installing hal), but every time after I reboot ubuntu tells me that it cannot mount the windows partition. If I reopen NTFS config after reboot now my previously-mounted partition shows as having 0Gb of data and there is a new /host partition that represents the windows partition. I can then mount it again by renaming it into /media/Windows and it again works until a reboot.
My problem is that in order to get Banshee to play my music thats in a Windows system on the LAN, I have to mount the volume first. This works fine if I navigate to the folder every time I startup Ubuntu and then play music through the library in banshee. However, I want to add a command to mount the volume on startup in the startup applications. I tried this in a terminal:
Code: sudo mount -a smb://home/p/My Music /home/username/Music/Music on Home This didn't mount anything. In fact, I couldn't even cd to the directory "smb://home/p/My Music". And yes, I did already make the directory "/home/username/Music/Music on Home". I'm thinking that my problem is really how do I write the address of a Windows network drive.
I've migrated back to Fedora as I am just displeased with the majority of debian based distros and Sabayon at the moment. Fedora has grown up quite a bit since FC9 and I'm here to stay. I keep all of my media and documents on a seperate partition on my disk and am wondering how I can have it set to automatically mount it upon startup. It gets kind of annoying having to re-enter my password every reboot just to mount the partition that 90% of my time is spent on.
I had windows vista on one partition, xp on another documents on another and programs on another.When I installed ubuntu on a new partition it very kindly let me see all the other partitions and mount them as necessary. I would like all my ubuntu files, documents music downloads to go right on to the documents partition so when I back up that drive to an external I have it backs up the documents drive it has all the files I have created in vista or ubuntu. Eventually I want to leave windows completely but I would still want to store all the ubuntu files on the documents drive.
I can go to "places" and mount the documents drive but what I would like to do is when I fire up ubuntu that the documents drive mounts automatically.
I've just installed Ubuntu desktop 10.10 on a Fujitsu Amilo laptop but it does not see any wireless network. It recognizes the wireless card but I don't know how to activate it or whether the drivers are already installed..
I am having permissions errors every time I try to mount a windows host. I have a linux server and all the windows computers can see that computer and its files, but we wanted to start backing up the linux machine to one of our other computers. so I tried to mount one of the computers. here is the sequence of events:
Code: $mount -t cifs //192.168.1.194/Admin$ /mnt/Anita-comp password: (I have no password so I left it blank) Mount error (13): Permission Denied I tried all sorts of passwords we use around the office and none of them worked.
I then decided to try mounting one of our other computers. this one looked like it worked fine. no error messages at all. (I left password blank) so I look in my filesystem and the mounted drive is not in the /mnt/Anita-comp file. What gives?
I've got a removeable disk which I want to mount on startup automatically at mountpoint "/backupsystem". If' it's not there I would like to have no error message. Actually after upgrading to 10.4 I get the message: Continue to wait; or press S to skip mounting or M for manual recovery.". But I don't wand this if the disk is not there that's OK for me. How would I configure fstab to achieve this?
I just moved from ubuntu to fedora 14 and I'm having an issue with a portable USB hard drive. When the hard drive is connected at startup it mounts at /dev/sda and my other 3 internal hard drives are mounted at /dev/sdb, /dev/sdc and /dev/sdd; of course this is an issue with my FSTAB file since i mount some of the partitions in the first hard drive (/dev/sda) at some special points in my file system, so i need to restart my computer and unplug the USB hard drive to get things working, however when i was working with ubuntu this didn't happen. I need that the USB hard drive mounts at /dev/sdd at startup so my FSTAB could work.
My system is F13 (upgraded from F11) with all of the latest patches available. I haven't gone through and combined all of the rpmnew configuration files, but none of them seem to address networking.I'm trying to get subinterfaces (secondary IP addresses) to work in Fedora 13. So far, I have been able to configure them on the command line, but not to get them to persist on booting.My base address for the NIC is: A.B.C.254. It is statically assigned.
i have a broadcom BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) wireless adapter on a dell 1501 run by ubuntu 10.10.this particular model and revision is suppose to be absolutely supported by linux and indeed it did work perfectly before the user ran a upgrade from ubuntu 10.10 to 11.04.subsequently i have reinstalled 10.10. as i recall when i installed ubuntu 10.10 the first time i simply ran the System>Admin>Additional Driver installation tool to make the wireless work. i cannot recall if i ran the b43 or the sta driver but i have tried both this time and had no luck.
i am aware that the broadcom adapters are notoriously troublesome and i have tried the two workarounds here URL... as well as their third alternate workaround with no success.
i have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
So ive got a Suse server up and running. It is connecting to a clearcase server, so i want to mount the remote filesystem as part of startup, as this is generally rebooted when im not around.I would normally add something to /etc/init.d and put the shortcut to it in the appropriate runlevel (in this case 3). Tried that. Didnt work.
Realised the init script needed to have the LBS stuff at the start, so put that in, and used insserv to add the script. I used required-start set to $ALl.This successfully created the init script with S20, and i eneabled it with chkconfig.
Just the last day or so, I've noticed a long pause when I boot my laptop, with lots of disk activity. dmesg says:
[Code]...
Why would there be a 15-second pause (during which the disk is slammed) between mounting root and mounting swap? During this time I see nothing but a blank purple screen, there are no cycling dots or text scroll. Is this normal and I'm just freaking out over nothing because there's no indicator of progress? GRUB default boot options: quiet splash nomodeset video=uvesafb:mode_option=1920x1200-24,mtrr=3,scroll=ywrap vt.handoff=7
I'm on an embedded system that doesn't have Gnome, and I'm trying to startup networking automatically using /etc/network/interfaces. Here's what I have.
[Code]....
eth0 comes up just fine. wlan0 comes up, but it's unable to acquire a DHCP address. I added the following lines to /etc/rc.local, and wlan0 comes up all the way, but I'm not too crazy about this hack.
I had installed Ubuntu Studio to check it out alongside my normal KDE system, and have decided to remove it. Problem is, having installed GNOME, I also got programs and libraries I no longer want or need alongside my existing KDE ones (ex. File Roller and Ark, I don't really need both, so I removed FR; I've removed other such programs I know about, as well). But I don't know all the programs or libraries that are still on here; in my package manager with a filter set for only installed programs I see a lot when I search 'gnome', but I'm wary of uninstalling things when I don't know what they do or if they're being used (I do have GNOME applications; I prefer Pidgin so I chose that over Kopete, for instance).
I ran apt-get uninstall ubuntustudio-desktop but despite the install process taking about 20 minutes it removed it in about 20 seconds...and seeing all these programs weren't removed along with it, I can see why. Is there a way I can remove all these things? They're taking up room and I'm not using them. I already did apt-get autoremove, as well. Anything else I can do to find and remove these programs besides reading through every single entry in my package manager's list of installed programs?
I am having problems installing Java runtime on karmic. The problem is: jre depends on the bin, and the bin depends on the jre package... Anyway to solve that? Should I try forcing? I can't get Ubuntu to connect to the internet, so I downloaded the deb packages and put them on a USB stick.
Last week, I wanted to view a web page that requires Internet Explorer to navigate through and decided to install wine and a compatible version of IE that was supposed to work according to a website I found on the matter.I've removed Wine using the Ubuntu Software Center, but still can not do updates.
I have an interesting problem I have had some troubleinding answers to with researching. The answer is probably so obvious that I should be able to see it. Here is my prob.I am trying to mount a root directory onto the same system (just for testing purposes)I am using nfs and have nfs-kernal-server nfs-common and portmap installed.if I have this in my /etc/exports
Code: / 192.168.1.0/24(rw,no_root_squash,async) then do
I have a server, with a static IP of 192.168.1.17, that is running Ubuntu lucid sever edition and that exports some shares per NFS. Here is its /etc/exports:
However, autofs does not work: the /msrv directory appears and disappears when I start and stop autofs; but when I enter "cd /msrv" followed by "cd Share05" in the terminal, I get the "bash: cd: /msrv/Share05: No such file or directory" message after the second command.
I am trying to get a ubuntu machine (client) onto a windows active directory (domain) this i have done and you can login using winbind to the client desktop no problems however i dont want the domain users' home directories on the client machine so i have set up a ubuntu server (samba) to hold the home directories now so far i have been able to set up a share which both windows and linux can read and write to with no passwords needed, and if i have modified the /etc/fstab file on the client to mount the samba share on startup however if i login as a domain user it fails to create a home directory on the share with the following error:
"/mnt/home/admin2" does not exist
now the main question is this in fstab i have used a cred file stored in /usr/share/.smbcred which should be accessible by all users right? i know i can put the creds into the fstab file but i can't find how and it is just failing to mount when i try so if you know how i will try that, also does fstab run before or after the home directory is created as if it runs after then the cred file is working but the home directory is looking at a location which hasnt been mounted yet or if fstab runs before then the location is not mounting right (hoping for second one )
