Ubuntu Networking :: TL-WNL951N Ath9k Not Working At Wireless N Speeds
Jan 10, 2011
I've recently purchased a TP-WNL951N PCI Card for wireless N stuff. I have a Netgear WNDR3700 for use with my AP and I've confirmed that within windows XP I can connect at 300mb/s.
Within Ubuntu though, it only goes up to 54mb/s. Is there something special I need to do to enable wireless N speeds?
Here's some info that I should probably put in:
Code:
root@Linux:~# lspci -nn | grep Atheros
05:00.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)
root@Linux:~# ifconfig wlan0
[Code]....
View 9 Replies
ADVERTISEMENT
May 1, 2011
Since upgrading to Ubuntu 11.04 my wireless connection has been extremely slow. The same happened with 10.10. Although that was quite different. Back then everything within my network moved slowly, but now it doesn't affect my web browser. It seems to have only slowed the application centre and update manager. I am still waiting for the flash plugin to download and install for testing ....., but I am torrenting Ubuntu 11.04 right now and have actually hit the limit of my bandwidth (1.1 MB/s) whereas the speed in the software centre and update manager was in the region of 45 kb/s.
I'm not sure if this is because I have installed extra drivers found here after I did some research.
Although my web surfing is fast and stable, I would like to get my updates and applications downloading properly. Does anyone know what I can do?
From my 2-hour googling spree I know you may want the results from the command "lspci"
Code:
root@Felicia:/home/silkworm# lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 9 Replies
View Related
May 15, 2011
I'm using a Netgear WN11v2 wireless USB card, which I've read some people can't even get working with the default Ubuntu wireless driver. It works for me, but it disconnects fairly often, and download speeds are extremely slow, like 12-15 kB/s. I have broadband, and am running Ubuntu 11.04.
View 3 Replies
View Related
Jul 24, 2010
I have an Acer 1551-4755 notebook with AR5B93 wireless chipset. ath9k is loaded and my card is detected as Atheros AR928X PCI-Express wireless network adapter. However, the ath9k driver is only allowing me to connect at 802.11g speed in spite of the fact that my WRT310N loaded with DD-WRT is in mixed mode. I am able to connect at wireless N speed with my D-Link DWA-130 usb dongle, but this is a rather backward solution. Is there a way to work around this issue, ie an updated ath9k or other madwifi driver? I would hate to resort to ndiswrapper for a natively supported chipset. I am using openSuSE 11.3 for the first time, long time Fedora user.
View 1 Replies
View Related
Jul 31, 2011
Just re-installed Bodhi. Ran update, dist-update, set up connection and connection still slow or timing out and reporting errors in 'iwconfig'. This is 3rd re-install of this version. Have also tried 3.0 kernel and pae versions of Bodhi. Cannot get this connection up to speed and without errors. Atheros chipset ar9271.
Sorry for weird subject line and opening paragraph. Trying to make it easy to find and browse in case this gets solved and can help someone else. Not being a Linux guru, I can only hope to help others through my mistakes and ignorance.
I followed instructions to update driver listed at Linux Wireless.
In addition to following the directions at Linux Wireless, I also downloaded the GUI Program to install ath9k_htc.
No luck. My connection reports 1M/s and is reporting "invalid misc:" errors in iwconfig.
I'm running Midori browser but apt-get and wget are also downloading slowly.
I'm connecting to a Zyxel 660 series router using WPA/WPA2.
uname -r
Code:
Code:
Code:
Code:
sudo lshw:
Code:
View 1 Replies
View Related
Oct 28, 2010
I have managed to compile and load the RaLink drivers for my wifi card and get an internet connection.My problem is that when I do a broadband speed test on using chrome I get about 1.5 Mbs and on my laptop (Windows 7 meh :-( ) its closer to 7Mbs. I was wondering if there are any other settings I can modify or tweak that could potentially change to improve this. or maybe a better way to test the through put of my connection?I downloaded the latest drivers for my device from Ralink and compiled new module, but I get a little confused on what settings to do and where it reads any configuration information from.
Also this may be off topic or thread, if so I apologise, but I am sure there is a quick answer to this and there is a lot of different information out there on where and how I load my new rt3562sta.ko module into the kernel on start up. As currently I am calling insmod on it manually every time I start up then the Network Manager picks it up and connects.
View 5 Replies
View Related
Apr 9, 2010
Anybody have any idea that how to set the ath9k in master mode in fedora 11. I am unable to set the same.
I am using the D-Link DWA556 card using the kernel built in ath9k.Find below the output I got while setting up it in master mode sudo iwconfig wlan0 mode master.Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument.Does that mean that master mode is not supported?Also Want the information if there is any separate community or development group for ath9k development and download the source of same except linuxwireless.com.
View 1 Replies
View Related
Nov 19, 2010
I've been running hostapd for a while in 11g mode with great success. Having upgraded the router machine to maverick today, I had a poke at getting hostapd working in 11n mode without too much fuss. From cursory reading of old forum posts, this appears to now be built in functionality without needing to compile drivers or hostapd from source - this is borne out by a few 11n-related lines in the default configuration file.
When adding those two lines to my config file, though, I get the same error message I did a few years ago when trying this out for the first time:
[Code].....
View 2 Replies
View Related
Jun 30, 2011
Since I installed Ubuntu I've had this problem that makes me loose connection to the Internet. The wireless-icon on the panel starts loading, and after like 5 minutes, it works again.I had this problem when I had Mint 11, but it happened more often.Anyone know how to fix? Edit:Network: Card-1 Atheros AR9285 Wireless Network Adapter (PCI-Express) driver ath9k Card-2 Marvell 88E8040 PCI-E Fast Ethernet Controller driver sky2
View 2 Replies
View Related
Jul 7, 2009
Today I finally installed Fedora 11 on my new laptop. To my surprise wireless was working already, this was something very new. however, i realized that the ath9k had a very bad connectivity. I cant even connect to my router from my bedroom which is less then 10 metres away. Is there some remedy for this unstable module? I have tried madwifi but it doesn't seem to work with my card which is a Atheros AR9285. Hopefully someone can shed some light on how he/she overcame this problem.
View 2 Replies
View Related
Oct 22, 2010
I have had some trouble with understanding the wireless drivers. I am using backtrack 4 R1, and the reason was merely for the network and having many necessary networking dependencies already there. However I found that I am using a HAL for the ath9k and madwifi-ng drivers, thus I must patch the card and go through all of that.
The specific distribution I am using is Backtrack 4 R1 with KDE3 and ubuntu on the 2.6.34 kernel. I know I have through an update script found the wireless drivers and downloaded them, however all attempts to get it to fully work haven't helped. I checked the forums, and it doesn't seem like they consider it a backtrack specific question but a linux specific question. I performed hwinfo and it returns ath9k and the memory address, channels 1-14, wlan frequencies(2.412,2.417, 2.422, 2.427, 2.432, 2.437, 2.442, 2.447, 2.452, 2.457, 2.462, 2.467, 2.472, 2.484. I have all modes of encryption set.
I am using both ifconfig and iwconfig with a wicd frontend to access the network typically. Unfortunately I am only seeing a wlan0 and no ath0. Furthermore, I manually issue these commands I am doing so I set each aspect of the card up (i.e essid, channel, mtu, fragmentation, etc....).
Now I did shed some light upon this in the sense that I found out how to initialize the madwifi-ng hal abstraction layer via 'start airmon-ng wlan0' and then it returns.....
mon0 ath9k py0 etc. etc. etc.( this isn't exact I am unfortunately not at my computer. But the device is then able to work, however I am not sure as to why I am not able to have the ath0 device in my wireless devices if indeed everything else appears to be ath0.
View 5 Replies
View Related
Sep 18, 2009
I am trying to get my wireless card working in master mode. I am running Jaunty server 2.6.28-11 x86_64. I have compiled hostapd with nl80211 enabled. The interface is using ath9k. I have tried to compile compat-wireless with this patch. However IEEE80211_IF_TYPE_AP was undefined along with IEEE80211_IF_TYPE_VLAN. In addition the latest version of compat-wireless needs to be patched for kernels < 2.6.31 with this. However when using this patch IRQ_WAKE_THREAD is still undefined.
I have got to this message:
Code:
$ sudo hostapd /home/jophish/.hostapd.conf
Configuration file: /home/jophish/.hostapd.conf
Failed to set interface wlan0 to master mode.
[code].....
View 1 Replies
View Related
Jun 30, 2011
In my desktop I recently installed one of these network cards. Web pages load pretty quickly, but the signal is only 2 out of 5 bars. On my notebook, I get 4/5 bars from the same location away from my wireless router. I have a 25/25 Verizon FiOS plan and can usually obtain around 30Mbps through Speedtest on my wired machines and notebook. But for some reason, my desktop barely goes over 4Mbps.
View 2 Replies
View Related
Dec 3, 2009
I have a small intel Atom based computer that acts as a 'combo' firewall / router / server / 802.11 Access Point that services my end user needs. I'm using hostapd 0.7.0 and Fedora 12 x86_64. The system works fine on Fedora 11. I decided to upgrade to Fedora 12 last night, and completely broke my wireless. Note that configurations are _identical_ between the Fedora 11 and Fedora 12 installation. Though, I did recompile the hostapd binary under Fedora 12 libs, etc.
Anyway, Client #1 associates fine. Client #2 associates, and hostapd hangs. Strace'ing the process shows nothing... just.. dead. SIGTERM works, but hostapd is unable to 'unallocate' the wlan0 interface, which appears to be in a hung state, so I can't simply re-start hostapd. So, I have to remove wlan0 from my bridge, them rmmod ath9k, modprobe ath9k, re-add wlan0 into the bridge, restart hostapd.. But the second association consistently hangs it every time. Next, I went and downloaded the latest compat-wireless drivers as of this posting. Selected the ath9k driver, built the modules, replaced them in my /lib/modules tree, depmod'd, reboot, etc..
BIG difference. Now hostapd does not hang, and there appears to be better logging/debug than ever before. This made me happy. Unfortunately, there appears to be a new problem. Clients can now associate, but only for a split second. They are immediately disconnected, and the following message appears via hostapd's stdout logging: hostapd: wlan0: STA 00:21:5c:39:a3:99 IEEE 802.11: did not acknowledge authentication response
For every client that attempts connection. Note that I'm using WPA2-EAP-PEAP w/ MSCHAPv2. I've also, for kicks, just tried regular WPA2-PSK with similar results. I'm using a mixture of clients, Windows XP, Windows 7, Linux Ubuntu, Fedora, and others.
[Code].....
View 1 Replies
View Related
Jul 21, 2010
I want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Mar 18, 2011
For some reason, i just cannot get my wireless to work in xubuntu. When i click on the network-manager applet, it only has the wired network tab and VPN connections, there are NO wireless networks displayed. I have also tried iwconfig, which returned
lo no wireless extensions.
eth0 no wireless extensions.
and lspci:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
[Code]...
View 1 Replies
View Related
Jul 18, 2011
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
View 9 Replies
View Related
Feb 16, 2011
I have a compaq nc6400 with the intel Pro/Wireless 3945 ABG card. It fails to find any wireless networks.the IWL3945 driver was installed automaticallyBut when searching for networks none are found, even though on any other computer in the house the network is found.According to https://help.ubuntu.com/community/Ha...sIntel#miniPCI
View 9 Replies
View Related
Apr 14, 2011
I've been working on this for a while. I have done the whole "install backports" thing, and that got me to the point where I can see the wireless connections; however, when I try to connect, I get a "Bad Password" message (which I don't believe, in the sense that I've checked the password back and forth several times). I am using maverick on an HP Pavilion dv7-1120. The relevant section of the lshw command is:
*-network
description: Wireless interface
product: AR928X Wireless Network Adapter (PCI-Express)
[code]...
View 1 Replies
View Related
Jul 8, 2011
I have just installed openSuse 11.4 KDE 64-bit on a Dell M1330. When I click on my networking panel, it says WLAN interface is unavailable. I've followed the steps in the stickied post and found the WLAN hardware info, a screenshot of which is below:Uploaded with ImageShack.usNext it says to do this - you need to look at the logs, in particular the info in /var/log/boot.msg. To see this, you need YaST => Miscellaneous => System Logs and select boot.msg.In YaST there is no such option for system logs under miscellaneous, so I can't do that. The results of the sudo /usr/sbin/iwlist scan command produce the following:
root's password:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
[code]....
View 9 Replies
View Related
Jul 15, 2010
I am new to Linux and have recently dropped Windows 7 (and windows all together for that matter) for Ubuntu 10.04.I love the look and feel of Linux and enjoy using it more over Windows. Despite this I am experiencing a serious problem which may cause me to revert back to Windows 7.I have a USB 3G modem: ZTE MF622 on the KKTCELL network.I have got this modem to work with wvdial and Gnome PPP, however i cannot get speeds over 60kb, Windows gives me well over 200kb.
I have tried a number of things but nothing has worked, it seems that no-one has posted a solution to this annoying conundrum.
View 7 Replies
View Related
Apr 10, 2010
I'm finding that the internet speed in Ubuntu 10.04 is over twice as slow as the speeds that I am getting in Windows 7.I've tried disabling IPv6 through Grub and Firefox but it didn't really help much.. anything else I can try?Connecting through wireless at 54 Mbps.
View 2 Replies
View Related
Dec 27, 2010
I have a BCM4321 and have not been able to get it to connect at N speeds, but finally got it working with broadcoms drivers from their site. The drivers in jockey would only get me b/g speed not n. Quote:Originally Posted by lshw -c network
[code]...
here is a small script that I wrote to assist others in getting it installed and working. First download the drivers from [URL]... then copy this into a script: compile.sh
[code]...
if the kernel changes then you will have to do this again. if you don't want that hassel and don't mind staying on your current kernel then lock it in the package manager.
View 1 Replies
View Related
Mar 20, 2011
i just installed Gosalia mad monkey on an old dell d520 latitude but cant get wireless working? i found how to set up my wireless connection butits asking for the default keyring password to unlock?i never set a password for this as it never askedi found this but i still dont understandit states" Typed in all the details, clicked Add and... �Enter password for default keyring to unlock�. Huh? I didn't set that... Tried the root password, tried the user password, none worked. The answer: Gosalia's team remastered Ubuntu with their password locking the keyring. Quite a funny situation. "
View 1 Replies
View Related
Feb 26, 2010
I have a HP DC-7600 with the built-in nic [3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethe
[Code]...
This was the best optimisation I could get, I did follow the NFS HOWTO. Copying from my PC does not exceed 120Mbits/s (System Monitor). My PC nic does not support jumbo frames. I'm looking for any assistance to improve my network speed. My PC has 4GB RAM. I copied 74GB of average sized files between 4MB to 12MB (uh ... compressed audio) and it took 155 mins using tar:
[Code]...
View 4 Replies
View Related
Mar 12, 2010
I am running Ubuntu 9.10 on a Dell inspiron 1520 with intel 3945abg wireless card. I am fairly new to linux and just installed it earlier in the day. Everything so far has been easy to setup and get running as well as the networking or so i though...
I can connect to my network and browse we pages just fine. However, when I download a file the speed starts high, drops down to around 50kbps and then works its way back up to around 1.3 mbps before dropping right back down. I tested a file on megaupload and it seems to bounce between 50kbps and 1.5mbps nonstop.
The driver i believe is the iwl3945 if that is the default driver. I have tried disabling ipv6 and that didnt seem to change anything. I've looked around on google and the forums and havent been able to find anything on how to fix this.
View 4 Replies
View Related
Apr 5, 2010
I am currently staying on a university campus in Taiwan. Internet on Ubuntu Lucid 64bit here is often painfully slow, except for connections to Taiwanese websites. I dual boot with Windows 7, and there is no problem there. For instance, I downloaded the same piece of software (Spideroak) on both Win and Ubuntu, with Ubuntu I had to try repeatedly as the download would not complete, and in the end it took several hours to download. On W7, it took 10 minutes. What is Windows and Ubuntu doing differently?
I tried disabling ipv6 for this session by running sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1, as a number of posts mention improving connection speed that way, but no effect.
I know that websites from Taiwan are working well, because I am getting my Ubuntu updates from a Taiwanese mirror: updates are fast, except for packages in the 'partner' repos (presumably not loaded from the mirror) which take hours to load, if at all. I don't want to depend on Windows for large downloads... (I don't want to depend on Windows for anything).
View 3 Replies
View Related
May 12, 2010
I'm on Ubuntu 10.04 and I'm having problems with internet speeds on wifi. I have tried the two available networks on my university campus and both of them are very slow with 10.04. I'm not having problems with Windows 7 running on these networks. Although, the wired network works perfectly fine, with normal speeds. I've looked around for help but I could not find anything specific to this problem.
View 2 Replies
View Related
Aug 4, 2010
I've just managed to access my windows share from Ubuntu but am now getting write speeds (to xp share) of only 9MB/s over my wired network, anyone have any ideas as to why this may be? I've googled but can find no specific answer.
My NIC is:
Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
(from lspci) on a Dell studio 1737)
View 3 Replies
View Related
